Introduction
This manual provides instructions for the PIXEL 3.5mm-S2 Shutter Connecting Cable. This cable is designed to connect a Pixel TW-283 series remote control to compatible Sony cameras, enabling remote shutter release functionality. Please read this manual carefully before use to ensure proper operation and longevity of the product.
Setup
Follow these steps to connect your PIXEL 3.5mm-S2 Shutter Connecting Cable:
- Identify Connectors: The cable features a 3.5mm stereo jack on one end and an S2 type connector on the other. The 3.5mm jack connects to the Pixel TW-283 series remote control, and the S2 connector plugs into your compatible Sony camera's multi-terminal port.
- Connect to Remote Control: Insert the 3.5mm stereo jack end of the cable into the designated port on your Pixel TW-283 series remote control. Ensure it is fully seated.
- Connect to Camera: Locate the multi-terminal port on your Sony camera. Gently insert the S2 connector end of the cable into this port. Do not force the connection.
Once both ends are securely connected, your camera and remote control are ready for use. Refer to your Pixel TW-283 remote control's manual for specific operating instructions.
Operating Instructions
The PIXEL 3.5mm-S2 Shutter Connecting Cable acts as a bridge between your Pixel TW-283 series remote control and your Sony camera. It does not have independent operational controls.
- Power On: Ensure both your camera and the Pixel TW-283 remote control are powered on.
- Remote Control Functions: Use the functions on your Pixel TW-283 remote control (e.g., half-press for autofocus, full-press for shutter release, timer functions) as described in its dedicated instruction manual. The cable will transmit these commands to the camera.
- Verify Connection: If the camera does not respond to the remote control, check that the cable connections are firm and that both devices are correctly configured according to their respective manuals.
Maintenance
Proper care will extend the life of your connecting cable:
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable, which can damage the internal wires.
- Cleaning: If necessary, gently wipe the cable and connectors with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Handling: Always grasp the connector housing when plugging or unplugging the cable, not the cable itself, to prevent strain on the connections.
Troubleshooting
If you encounter issues with your PIXEL 3.5mm-S2 Shutter Connecting Cable, consider the following:
- Camera Not Responding:
- Ensure the cable is securely plugged into both the camera and the remote control.
- Verify that your camera model is listed as compatible with the S2 connector type.
- Check the batteries in your Pixel TW-283 remote control.
- Test the remote control with another compatible cable if available, or test the camera with another remote/cable setup to isolate the issue.
- Intermittent Connection:
- Inspect the connectors for any visible damage, dirt, or debris. Clean gently if necessary.
- Ensure the cable is not kinked or excessively bent, which could cause internal wire damage.
Specifications
| Feature | Detail |
|---|---|
| Brand | PIXEL |
| Model Name | Pixel Shutter Connecting Cable |
| Model Number | PXL-JU3.5-S2 |
| Connector Type | 3.5mm Auxiliary (Male-to-Male) |
| Cable Type | Wired |
| Compatible Devices | Sony Cameras (various models including a9, a7 series, a6000 series, RX series, HX series, NEX-3N, ILCE-QX1, DSC-QX30, DSC-WX500) |
| Compatible Remote | Pixel TW-283 Series Shutter Remote Control |
| Special Feature | Tangle Free |
| Cable Length | 40 cm (approximately 15.7 inches) |
| Item Weight | 0.02 Kilograms |
| Color | Black |
Warranty Information
This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the documentation provided with your purchase or contact PIXEL customer support.
Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact PIXEL customer support through their official website or the retailer where the product was purchased. Have your product model number (PXL-JU3.5-S2) and proof of purchase ready when contacting support.