FLEXISPOT Standing Desk Frame User Manual

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your FLEXISPOT Standing Desk Frame (Model E1). Designed for home and office use, this electric sit-stand desk base offers adjustable height, an integrated power strip, and a cable management tray for an efficient and organized workspace.

The FLEXISPOT Standing Desk Frame provides a versatile foundation for your workstation, allowing for both sitting and standing positions.

2. Safety Information

Important Safety Precautions:

• Ensure the desk is securely anchored when used as a standing desk.
• Do not exceed the maximum weight recommendation of 154 pounds (70 kg).
• Handle electrical components with care to avoid any risk of electric shock.
• Keep children and pets away from the desk during operation.
• Avoid placing liquids directly on the control panel or motor.

3. Parts List

Before assembly, verify that all components are present and undamaged. Refer to the diagram below for identification.

All components included in the FLEXISPOT Standing Desk Frame package.

Included Components:

• Desk Frame (Legs and Crossbeam)
• Desk Clamp Power Strip (3 AC Outlets, 2 USB Ports)
• Cable Management Tray
• Memory Controller/Keypad
• Transmission Rod
• Assembly Tools (Allen wrench, spanner)
• Screws and Fasteners

4. Setup and Installation

FLEXISPOT provides detailed assembly instructions and all necessary tools. The setup process typically takes less than 30 minutes. For a visual guide, please refer to the official installation video below.

Assembly Steps Overview:

1. Insert the coupling into the motor: Ensure correct direction as shown in the video.
2. Insert the motor and the right column: Secure the motor within the column.
3. Install the crossbeam: Align the protrusions with the holes and secure with screws.
4. Install the support plates: Attach the support plates to the frame.
5. Install the desk foot: Secure the feet to the bottom of the columns.
6. Adjust the crossbeam: Ensure the crossbeam is properly aligned and tightened.
7. Install table board (customer provided): Secure your chosen desktop to the frame using the provided screws.
8. Install the transmission rod: Connect the transmission rod between the motor and the other lifting column.
9. Tighten the transmission rod nut: Ensure the rod is securely fastened.
10. Install the keypad: Attach the control keypad to the underside of the desk.
11. Install the hook: Attach the headphone hook to the side of the desk.
12. Connect all cables: Ensure all motor, power, and control cables are properly connected and managed.

DIY Desktop Workstation: The adjustable desk legs are compatible with various desktop sizes, providing maximum flexibility for your DIY setup. Recommended desktop sizes: width of 39.3" to 63", depth of 19.7" to 31.5".

The desk frame is designed to accommodate various desktop sizes, allowing for personalized customization.

5. Operation

Your FLEXISPOT Standing Desk Frame features an electric lifting mechanism and a memory controller for easy height adjustments.

Control Panel Functions:

The programmable control panel allows for precise height adjustments and memory settings.

• Up/Down Arrows: Press and hold to continuously adjust the desk height. The adjustable height range is 28.1''-45.7''.
• LED Display Panel: Shows the current desk height in inches.
• Memory Settings (1, 2, 3, 4): Press a numbered button to move the desk to a pre-saved height. To save a height, adjust the desk to your desired position, then press and hold one of the numbered buttons until the display flashes or beeps.

Integrated Power Strip and Cable Management:

The desk comes with a clamp power strip for convenient access to power outlets and USB ports, reducing clutter. The integrated cable management tray helps keep your cords organized and out of sight.

The integrated power strip provides easy access to power for your devices.

Effective cable management helps maintain a clean and clutter-free workspace.

6. Quality and Testing

FLEXISPOT products undergo rigorous testing to ensure durability and stability. The desk frame features dual-stage legs for continuous height adjustment and enhanced stability.

Dual-stage legs provide a wide range of continuous height adjustment for optimal ergonomics.

The robust design with bigger flanks, thicker columns, and wider feet ensures superior stability.

7. Maintenance

To ensure the longevity and optimal performance of your FLEXISPOT Standing Desk Frame, follow these simple maintenance guidelines:

• Regularly wipe down the frame with a soft, damp cloth to remove dust and debris. Avoid harsh chemicals.
• Check all screws and fasteners periodically to ensure they are tight. Retighten if necessary.
• Keep the electrical components (motor, control panel, power strip) dry and free from spills.
• Ensure cables are neatly managed and not pinched or tangled, especially during height adjustments.
• Do not overload the desk beyond its maximum weight capacity of 154 pounds (70 kg).

8. Troubleshooting

If you encounter any issues with your FLEXISPOT Standing Desk Frame, refer to the common troubleshooting tips below. If the problem persists, please contact customer support.

9. Specifications

Detailed dimensions of the FLEXISPOT Standing Desk Frame.

10. Warranty and Support

Warranty Information:

The FLEXISPOT Standing Desk Frame is covered by a comprehensive warranty:

• 5-year warranty: Covers the frame, motor, and other mechanical mechanisms.
• 2-year warranty: Covers the controller, switch, and electronics.

Please retain your proof of purchase for warranty claims.

Customer Support:

For further assistance, technical support, or warranty inquiries, please visit the official FLEXISPOT website or contact their customer service team. You can find more information and contact details on the FLEXISPOT Store on Amazon.