PowerA Enhanced Wireless Controller for Nintendo Switch Instruction Manual

Introduction

This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your PowerA Enhanced Wireless Controller for Nintendo Switch. Please read this guide thoroughly to ensure optimal performance and a satisfying gaming experience.

Setup

System Update

Ensure your Nintendo Switch system is updated to version 6.0.1 or later. Connect your Nintendo Switch to the internet. Navigate to System Settings from the HOME Menu, then scroll down to System to see the system update version and automatically check for updates.

Installing Batteries

The controller requires two (2) AA alkaline batteries for operation. For optimal performance, use new alkaline batteries.

1. Locate the battery compartment on the back of the controller.
2. Open the battery door by sliding it downwards.
3. Insert two fresh AA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery door securely until it clicks into place.

Back view of the controller with the battery compartment visible.

Wireless Pairing

Follow these steps to pair your controller with your Nintendo Switch:

1. Ensure your Nintendo Switch console is powered on.
2. From the HOME Menu, select Controllers.
3. Select Change Grip/Order.
4. On the PowerA Enhanced Wireless Controller, press and hold the SYNC Button (located on the top edge of the controller, between the shoulder buttons) for at least one second.
5. The LED connection indicator on the controller will flash, signaling it is in pairing mode.
6. Once the controller is paired, it will auto-connect next time the console is powered on and the controller is activated.

Operating Instructions

Basic Controls

The PowerA Enhanced Wireless Controller features a standard button layout for intuitive gameplay:

• Two analog sticks for precise movement and camera control.
• A D-pad for directional input.
• A/B/X/Y action buttons.
• L/R shoulder buttons and ZL/ZR triggers.
• Plus (+) and Minus (-) buttons.
• HOME button and Capture button.

The controller also supports motion controls for compatible games, enhancing your immersive experience.

Front view of the controller, showcasing its ergonomic design and button layout.

Advanced Gaming Buttons (AGB)

The controller includes two mappable Advanced Gaming Buttons (AGB) on the back, allowing you to assign functions for quick access during gameplay.

To Program an AGB:

1. Hold the Program button (small button on the back, near the battery compartment) for 2-3 seconds. The LED connection indicator will slowly flash, signaling program mode.
2. Press the button you wish to map (A, B, X, Y, L, R, ZL, ZR, D-pad, or any other standard button).
3. Press the AGB (left or right) you want to assign the function to.
4. The LED connection indicator will flash quickly to confirm the AGB has been programmed.

To Reset AGBs:

Press and hold the Program button for 5 seconds to clear all assigned functions from the AGBs.

LED Indicators

The controller features LED indicators to provide important status information:

• The LED near the SYNC button will flash red when the alkaline batteries are nearing depletion. Replace batteries promptly to avoid gameplay interruption.
• The Home/View buttons indicate player number (1-8) and will flash during the programming of Advanced Gaming Buttons.

Maintenance

To ensure the longevity and optimal performance of your PowerA Enhanced Wireless Controller, please follow these maintenance guidelines:

• Keep the controller clean by regularly wiping it with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials.
• Avoid exposing the controller to extreme temperatures, high humidity, or direct sunlight.
• Do not disassemble or attempt to repair the controller yourself, as this may void the warranty.
• Store the controller in a safe place when not in use to prevent accidental damage.

Troubleshooting

Controller Not Pairing

• Confirm that fresh AA alkaline batteries are properly installed in the controller.
• Ensure your Nintendo Switch system is updated to the latest version (6.0.1 or later).
• Follow the wireless pairing process detailed in the "Wireless Pairing" section.
• Remove and replace the alkaline batteries to perform a hard reset of the wireless controller, then attempt pairing again.

Input Issues (Sticks/Buttons Not Responding)

• If control sticks or buttons are not responding as expected, try recalibrating them through the Nintendo Switch System Settings. Navigate to System Settings > Controllers and Sensors > Calibrate Control Sticks or Calibrate Motion Controls.
• Ensure there are no obstructions around the buttons or analog sticks.

Specifications

Warranty and Support

This PowerA Enhanced Wireless Controller is an officially licensed product and comes with a 2-year limited warranty.

For support with your authentic PowerA accessories, including warranty claims or technical assistance, please visit the support section of PowerA.com or contact their customer service directly.

Motion Warning

Playing video games can make your muscles, joints, skin or eyes hurt. Follow these instructions to avoid problems such as tendonitis, carpal tunnel syndrome, skin irritation or eyestrain:

• Avoid excessive play. Take a 10 to 15 minute break every hour, even if you don't think you need it.
• Parents should monitor their children for appropriate play.
• If your hands, wrists, arms or eyes become tired or sore while playing, or if you feel symptoms such as tingling, numbness, burning or stiffness, stop and rest for several hours before playing again.
• If you continue to have any of the above symptoms or other discomfort during or after play, stop playing and see a doctor.