MOXA UC-8112-ME-T-LX Commun-Centric RISC Computing Platform User Manual

1. Product Overview

The MOXA UC-8112-ME-T-LX is an Arm-based wireless-enabled DIN-rail industrial computer designed for embedded data acquisition applications. It features a 1 GHz CPU, 512MB RAM, a Mini PCIe socket for cellular connectivity, two Ethernet ports, two serial ports, a USB port, and an SD socket, making it a versatile platform for industrial automation and control systems.

Figure 1: Front view of the MOXA UC-8112-ME-T-LX computing platform. This image displays the compact form factor suitable for DIN-rail mounting, highlighting the various connectivity options available on the device's front panel, including Ethernet, serial, USB, and SD card slots.

2. Setup and Installation

This section outlines the steps required to set up and install your MOXA UC-8112-ME-T-LX computing platform.

2.1 Unpacking and Inspection

• Carefully remove the device from its packaging.
• Inspect the device for any signs of physical damage during transit. If damage is found, contact your supplier immediately.
• Verify that all components listed in the packing list are present.

2.2 DIN-Rail Mounting

The UC-8112-ME-T-LX is designed for easy installation on a standard DIN-rail.

1. Locate the DIN-rail clip on the back of the device.
2. Hook the top edge of the DIN-rail clip over the top edge of the DIN-rail.
3. Push the bottom of the device firmly towards the DIN-rail until it clicks into place.
4. Ensure the device is securely fastened and does not wobble.

2.3 Power Connection

Connect the power supply to the device's power input terminal. Ensure the power source meets the voltage and current requirements specified in the product's technical specifications.

2.4 Initial Network Configuration

Connect an Ethernet cable from one of the device's Ethernet ports to your network switch or router. Refer to the device's software manual for initial IP address configuration and network settings.

3. Operating Instructions

This section provides general guidelines for operating the MOXA UC-8112-ME-T-LX.

3.1 Powering On/Off

• Power On: Once the power supply is connected, the device will typically power on automatically. Observe the LED indicators for system status.
• Power Off: To power off, disconnect the power supply. For systems running an operating system, ensure a proper shutdown procedure is followed to prevent data corruption before disconnecting power.

3.2 Connectivity and Data Acquisition

The UC-8112-ME-T-LX supports various interfaces for data acquisition and communication:

• Ethernet Ports: Use for network communication, data transfer, and remote management.
• Serial Ports: Connect to industrial devices using RS-232/422/485 protocols for data collection.
• USB Port: For connecting peripherals such as keyboards, mice, or external storage devices.
• SD Socket: For expandable storage or booting from an SD card.
• Mini PCIe Socket: Supports cellular modules for wireless connectivity, enabling remote data transmission.

Refer to the specific software documentation for configuring and utilizing these interfaces for your data acquisition applications.

4. Maintenance

Proper maintenance ensures the longevity and reliable operation of your MOXA UC-8112-ME-T-LX.

• Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or aerosols. Ensure the device is powered off before cleaning.
• Environmental Conditions: Operate the device within its specified temperature and humidity ranges. Avoid exposure to excessive dust, moisture, or direct sunlight.
• Firmware Updates: Regularly check the MOXA website for firmware and software updates to ensure optimal performance and security.
• Cable Management: Ensure all cables are securely connected and properly routed to prevent accidental disconnections or damage.

5. Troubleshooting

This section provides solutions to common issues you might encounter with the MOXA UC-8112-ME-T-LX.

5.1 Device Not Powering On

• Verify that the power supply is correctly connected and providing the correct voltage.
• Check the power outlet for functionality.
• Ensure the power cable is not damaged.

5.2 Network Connectivity Issues

• Check Ethernet cable connections at both ends.
• Verify network settings (IP address, subnet mask, gateway) are correctly configured.
• Ensure the network switch or router is functioning correctly.
• Check the status LEDs on the Ethernet ports for activity.

5.3 Serial Port Communication Failure

• Confirm the serial cable is correctly wired and connected to the peripheral device.
• Verify the serial port settings (baud rate, data bits, parity, stop bits) match those of the connected device.
• Ensure the correct serial port driver is installed and configured in the operating system.

If issues persist, consult the detailed troubleshooting guide available on the official MOXA support website or contact technical support.

6. Specifications

Key technical specifications for the MOXA UC-8112-ME-T-LX computing platform:

7. Warranty and Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official MOXA website. Technical support and additional resources, including drivers and software downloads, are available through the MOXA support portal.

Official MOXA Website: www.moxa.com