1. Introduction
The NZXT AER RGB 2 fan integrates seamlessly into the Hue 2 ecosystem, providing optimal airflow and advanced lighting customizations for your PC. Designed with fluid dynamic bearings and winglet tips, these fans offer enhanced cooling performance while minimizing operational noise. This manual provides essential information for the proper installation, operation, and maintenance of your AER RGB 2 fan.
Image 1.1: NZXT AER RGB 2 120mm fan showcasing its RGB lighting.
2. What's in the Box
Verify that all components are present before proceeding with installation:
- 1 x 120mm AER RGB Case Fan
- 1 x 500mm Fan Connection Cable
- 1 x 50mm Fan-to-Fan Cable
- 1 x 500mm Fan-to-Accessory Cable
3. Setup and Installation
Proper installation is crucial for optimal performance and aesthetics. Ensure your PC is powered off and unplugged before beginning.
3.1 Fan Mounting
Mount the AER RGB 2 fan to your PC case or radiator using the provided screws. Ensure the fan is oriented correctly for desired airflow (intake or exhaust).
Image 3.1: Side view of the fan, highlighting mounting screw locations.
3.2 Cabling and Controller Connection
The AER RGB 2 fan requires an NZXT Hue 2 RGB lighting controller (sold separately) for full functionality and lighting customization. Connect the fan to the controller using the appropriate cables.
- Fan Connection Cable: Connects the fan to a fan channel on the Hue 2 controller.
- Fan-to-Fan Cable: Used to daisy-chain multiple AER RGB 2 fans together for synchronized lighting and control.
- Fan-to-Accessory Cable: Connects the fan to other Hue 2 accessories.
The Hue 2 controller typically features multiple RGB lighting channels and PWM fan channels, allowing for extensive customization and control over your cooling and lighting setup.
Video 3.2: Overview of the NZXT RGB & Fan Controller, demonstrating its features and connectivity options. This controller is essential for managing your AER RGB 2 fans.
Ensure all cables are securely connected to prevent intermittent issues. Refer to your Hue 2 controller's manual for specific port identification and connection guidelines.
4. Operation and Software Control
The NZXT AER RGB 2 fan is controlled via the NZXT CAM software. This software allows for comprehensive management of fan speeds, RGB lighting effects, and system monitoring.
4.1 NZXT CAM Software
Download and install the NZXT CAM software from the official NZXT website. An internet connection is required for download and some features. The software provides:
- Fan Control: Adjust PWM fan speeds to optimize cooling performance and noise levels.
- RGB Lighting Customization: Synchronize lighting effects across multiple AER RGB 2 fans and other Hue 2 accessories. Choose from various presets or create custom lighting profiles.
- System Monitoring: Monitor CPU and GPU temperatures, fan RPMs, and other system metrics.
Video 4.1: A brief overview of the NZXT AER RGB Case Fan, showcasing its lighting capabilities and integration within a PC build.
System Requirements: PC with HUE 2 RGB lighting controller and Windows 10 operating system. Internet connection is needed to download CAM. Some CAM features require Internet access, a valid email address, and acceptance of our current Terms of Service.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your AER RGB 2 fan.
5.1 Cleaning
- Periodically clean fan blades and housing to prevent dust buildup, which can impede airflow and increase noise.
- Use a can of compressed air or a soft, dry cloth to gently remove dust.
- Ensure the PC is powered off and unplugged before cleaning.
6. Troubleshooting
If you encounter issues with your AER RGB 2 fan, refer to the following common solutions:
- Fan Not Spinning: Check all power and signal cable connections to the fan and the Hue 2 controller. Ensure the controller is receiving power.
- RGB Lighting Not Working: Verify that the fan's RGB cable is correctly connected to an RGB channel on the Hue 2 controller. Check CAM software settings for lighting profiles and ensure the controller is detected.
- Excessive Noise: Ensure the fan is securely mounted and not vibrating against the case. Check for dust buildup on fan blades and clean if necessary. Adjust fan speed profiles in CAM software.
- CAM Software Not Detecting Fan/Controller: Ensure the Hue 2 controller is properly connected to your motherboard's internal USB header. Restart CAM software or your PC.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | HF-28120-B1 |
| Product Dimensions | 4.7"L x 1"W x 4.7"H (120mm x 25mm x 120mm) |
| Material | Copper (Bearing) |
| Power Connector Type | 4-Pin (PWM) |
| Voltage | 12 Volts |
| Wattage | 24 watts |
| Cooling Method | Air |
| Compatible Devices | Personal Computer |
| Noise Level | 33 Decibels |
| Maximum Rotational Speed | 1500 RPM |
| Bearing Type | Fluid Dynamic Bearing (FDB) |
8. Warranty and Support
For detailed warranty information and technical support, please visit the official NZXT website or contact their customer service. Keep your proof of purchase for warranty claims.
NZXT Official Website: www.nzxt.com
