Introduction
This manual provides instructions for the AIDITIYMI EN2A27 replacement remote control, designed for various Hisense LED Smart TV and HDTV models. This remote control is an infrared (IR) device and does not require programming or pairing. Simply install batteries to begin use.
Compatible Hisense TV Models include:
- 55H6B, 32H5C, 40H5C, 40K368AW, 43CU6100, 43H5C, 43H6C, 43H7C, 43H7C2
- 50CU6000, 50H5C, 50H6B, 50H6C, 50H6GB, 50H6SG, 50H7C, 50H7GB, 50H7GB1, 50H7GB2, 50H8C
- 55H5C, 55H65G, 55H6SG, 55H7B, 55H7B2, 55H7C, 55H7D, 55H7G, 55H8C, 55H9B2
- 65CU6200, 65H10B, 65H10B2, 65H6C, 65H7B, 65H7B2, 65H7C, 65H8C
- ERF6B11, LC17340N5000U, LC-17343N5000U, LC-17343N6100U, LC-17343N7000U, LC-17350N5000U, LC-17350N6000U, LC173-50N7000U, LC173-55N6000U, LC-17355N7000U, LC-17360N5100U, LC173-60N6200U, LC173-60N7000U, LC173-65N5200U, LC-17365N7000U, LC173-65N9000U, LC173-75N8000U
- LC-40N5000U, LC-43N7000U, LC-50N5000U, LC-50N7000U, LC55N620CU, LC-55N7000U, H5C, H8C Series
- LC-60N6200U, LC-60N7000U, LC-65N7000U, LC-75N620CU, LTDN55K2203GWUS, N6200U, RT167723
Setup
1. Battery Installation
The remote control requires two (2) AAA alkaline batteries (not included).
- Locate the battery compartment on the back of the remote control.
- Press down on the latch and slide the battery cover downwards to open it.
- Insert two new AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Image: Back view of the remote control with the battery compartment open, illustrating where to insert AAA batteries.
2. Initial Use
This replacement remote control does not require any programming or pairing. Once the batteries are correctly installed, it is ready for immediate use with compatible Hisense LED Smart TVs.
Operating Instructions
Point the remote control directly at your Hisense TV's infrared receiver for optimal performance. Ensure there are no obstructions between the remote and the TV.
Image: Front view of the AIDITIYMI EN2A27 remote control, displaying the layout of all buttons.
Button Functions:
- Power (Red Button): Turns the TV on or off.
- INPUT: Cycles through available input sources (HDMI, AV, etc.).
- Number Buttons (0-9): Directly select channels or input numbers.
- CC (Closed Caption): Toggles closed captions on or off.
- Colored Buttons (Red, Green, Yellow, Blue): Functionality varies depending on the TV menu or application.
- Settings (Gear Icon): Accesses the TV's settings menu.
- Directional Pad (Up, Down, Left, Right): Navigates through menus and options.
- OK: Confirms selections in menus.
- BACK: Returns to the previous menu or screen.
- EXIT: Exits the current menu or application.
- Home (House Icon): Returns to the TV's main home screen or smart TV interface.
- VOL +/-: Adjusts the volume level.
- Mute (Speaker with X): Mutes or unmutes the TV audio.
- CH +/-: Changes the TV channel up or down.
- Live TV: Switches to live television broadcast.
- Media Playback Controls (Play/Pause, Stop, Rewind, Fast Forward, Skip Back, Skip Forward): Controls media playback in compatible applications or USB media.
- SLEEP: Sets a sleep timer for the TV.
- Dedicated App Buttons (Netflix, Amazon, Vudu, YouTube): Directly launch the respective streaming applications.
Maintenance
Battery Replacement
Replace batteries when the remote control's response becomes inconsistent or stops working. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.
Cleaning
To clean the remote control, gently wipe it with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.
Storage
Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If the remote will not be used for an extended period, it is recommended to remove the batteries to prevent leakage.
Troubleshooting
- Remote not responding:
- Ensure the remote is pointed directly at the TV's IR sensor.
- Check if there are any obstructions between the remote and the TV.
- Replace the batteries with new AAA alkaline batteries.
- Verify that the TV is powered on.
- Buttons not working or freezing TV:
- This remote is designed for specific Hisense models. Confirm your TV model is listed in the "Compatible Hisense TV Models" section.
- Remove and reinsert the batteries to reset the remote.
- If the TV itself is frozen, try unplugging the TV from the power outlet for a few minutes, then plug it back in.
- Short operating range:
- Replace the batteries with new ones.
- Ensure the remote's IR emitter and the TV's IR receiver are clean and unobstructed.
Specifications
| Brand | AIDITIYMI |
| Model Number | EN2A27 (AIDITIYMI-EN2A27-AD01) |
| Connectivity Technology | Infrared (IR) |
| Compatible Devices | Hisense LED Smart Televisions |
| Power Source | 2 x AAA Batteries (not included) |
| Maximum Range | Approximately 32 feet (10 meters) |
| Dimensions (L x W x H) | 8" x 2" x 0.6" (20.3 cm x 5.1 cm x 1.5 cm) |
| Color | Black |
| Special Feature | Ergonomic design |
Warranty Information
This AIDITIYMI remote control comes with a 1-Year Warranty from the manufacturer. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or battery leakage. Please retain your proof of purchase for warranty claims.
Support
For further assistance or inquiries regarding your AIDITIYMI EN2A27 remote control, please refer to the product's original purchase platform or contact the seller directly. Ensure you have your product model number (EN2A27) and proof of purchase available when seeking support.