1. Product Overview
This manual provides instructions for the YING RAY replacement remote control designed for specific Lennox air conditioner models. This remote control is a direct replacement and does not require programming for basic functions.

Image 1: YING RAY Replacement Remote Control. This image displays the front view of the remote control, showing its LCD screen and various function buttons.
2. Setup
2.1 Battery Installation
- Open the battery compartment cover on the back of the remote control.
- Insert two AAA 1.5V ordinary batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover.
The remote control operates without any programming once batteries are installed.
2.2 Battery Contact Troubleshooting (For Type "B" Batteries)
If the remote control does not function after battery installation, it may be due to poor contact between the battery's positive pole and the spring in the remote, especially with certain battery types (Type "B").

Image 2: Battery Contact Adjustment. This image illustrates how to gently pull out the battery spring in the remote control's battery compartment to ensure better contact with the positive pole of a Type "B" battery.
To resolve this, gently pull the battery spring out a little to improve contact, as illustrated in Image 2.
3. Operating Instructions
The remote control features various buttons for controlling your Lennox air conditioner. The display shows temperature in Celsius only.
| Button | Function |
|---|---|
| ON/OFF | Powers the air conditioner on or off. |
| MODE | Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto). |
| ▲ / ▼ | Adjusts temperature settings up or down. |
| FAN | Adjusts fan speed settings. |
| TIMER | Sets the timer for automatic on/off operations. |
| SLEEP | Activates sleep mode for comfortable nighttime operation. |
| LIGHT | Controls the display light on the air conditioner unit. |
| QUIET | Activates a low-noise operating mode. |
| TURBO | Engages maximum power for rapid cooling or heating. |
| BLOW | Activates a fan-only function to dry the indoor unit and prevent mold. |
| HEALTH / FRESH AIR | Activates air purification or fresh air intake functions (if supported by AC unit). |
| ECONO | Activates energy-saving mode. |
4. Maintenance
4.1 Battery Replacement
Replace batteries when the remote control's display becomes dim or its response time slows. Always replace both batteries simultaneously with new AAA 1.5V ordinary batteries.
4.2 Cleaning
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.
5. Troubleshooting
5.1 Remote Not Responding
- Check Batteries: Ensure batteries are inserted correctly with the correct polarity (+/-). Replace old batteries with new ones.
- Battery Contact: If using Type "B" batteries, refer to Section 2.2 for instructions on adjusting the battery spring for better contact.
- Line of Sight: Ensure there is a clear line of sight between the remote control and the air conditioner's receiver. Obstructions can block the infrared signal.
- Remote Sensor: Ensure the remote control's infrared emitter and the air conditioner's receiver are clean and free from dust.
5.2 Incorrect Functionality
- This remote is designed for specific Lennox models. Verify your air conditioner model is listed as compatible. This is not a universal remote.
- Remove and reinsert batteries to reset the remote control.
6. Specifications
- Brand: YING RAY
- Compatible Air Conditioner Models: LM012CI-100V232-1X, LM012CI-100P232-1X, LM018CI-100P232-1X, LM024CI-100P232-1X, LM036CI-100P232-1X, LM012HI-100V232-1X, LM012HI-100P232-1X, LM018HI-100P232-1X, LM024HI-100P232-1X, LM036HI-100P232-1X
- Battery Type: 2 x AAA 1.5V Ordinary Batteries (not included)
- Display: Celsius Only
- Connectivity Technology: Infrared
- Item Model Number: 2018082601
7. Warranty and Support
Specific warranty information for this YING RAY replacement remote control is not provided in the product details. For warranty inquiries or technical support, please contact the seller directly through your purchase platform.