1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your uxcell Cooling Fan, model SF8025AT. Please read this manual thoroughly before using the product and retain it for future reference.
Figure 1: uxcell Cooling Fan SF8025AT (Front View)
2. Safety Information
WARNING: To reduce the risk of electric shock, fire, or injury, read and follow all instructions carefully.
- Ensure the power supply matches the fan's voltage (AC 110V/120V).
- Do not operate the fan with a damaged power cord or plug.
- Keep fingers and other objects away from the fan blades during operation.
- Install the fan in a well-ventilated area.
- Disconnect power before cleaning or performing any maintenance.
- This product is designed for specific applications; consult a professional if unsure about compatibility.
3. Package Contents
Verify that all components are present in the package:
- 1 x uxcell Cooling Fan SF8025AT
- (Mounting screws and other accessories may be sold separately or included depending on the specific retail package.)
4. Specifications
Technical specifications for the uxcell Cooling Fan SF8025AT:
| Feature | Specification |
|---|---|
| Model | SF8025AT |
| Dimensions (L x W x H) | 80 x 80 x 25mm (3.15" x 3.15" x 0.98") |
| Mounting Hole Distance | 73 x 73 mm |
| Voltage | AC 110V/120V |
| Rated Current | 0.1A |
| Input Power | 15.4W |
| Speed (R.P.M.) | 2500 R.P.M. (+/- 10%) |
| Air Flow (CFM) | 0.5 CFM Max. |
| Noise Level | 30 dB-A |
| Bearing Type | Dual Ball Bearing |
| Material | Plastic |
| Weight | 216g (7.62 oz) |
Figure 2: Fan Dimensions and Mounting Holes
5. Setup and Installation
Follow these steps for proper installation of your cooling fan:
- Preparation: Ensure the device where the fan will be installed is powered off and disconnected from the main power supply.
- Mounting Location: Identify a suitable mounting location that allows for optimal airflow. The fan is designed for 80mm x 80mm mounting points.
- Orientation: Determine the desired airflow direction. Fans typically have an arrow indicating airflow direction on the side frame. Ensure the fan is oriented to draw air in or push air out as required by your system.
- Secure Mounting: Use appropriate screws (not included) to secure the fan to the mounting surface. Ensure the fan is firmly attached to prevent vibration and noise. The mounting hole distance is 73mm x 73mm.
- Power Connection: Connect the fan's power cable to an AC 110V/120V power source. This fan typically uses a 2-wire connection for AC power. Ensure connections are secure and insulated.
- Final Check: Before restoring power, double-check all connections and ensure no wires are obstructing the fan blades.
Figure 3: uxcell Cooling Fan SF8025AT (Back View)
6. Operating Instructions
Once installed, operating the uxcell Cooling Fan is straightforward:
- Power On: Restore power to the device or system where the fan is installed. The fan should begin operating immediately.
- Verify Operation: Observe the fan to ensure the blades are spinning freely and quietly. Check for proper airflow in the intended direction.
- Continuous Operation: This fan is designed for continuous operation to provide consistent cooling.
7. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your cooling fan:
- Cleaning: Periodically inspect the fan blades and housing for dust accumulation. Dust can impede airflow and reduce cooling efficiency.
- Dust Removal: To clean, first disconnect the fan from its power source. Use a soft brush, compressed air, or a vacuum cleaner with a brush attachment to gently remove dust from the blades and grille. Do not use liquids or harsh chemicals.
- Inspection: Check for any signs of wear, such as loose wires or damaged blades. If any damage is found, discontinue use and replace the fan.
- Bearing Maintenance: The dual ball bearings are designed for long-term, maintenance-free operation. No lubrication is typically required.
8. Troubleshooting
If you encounter issues with your uxcell Cooling Fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not spin | No power supply; Loose connection; Damaged fan motor. | Check power source and connections. Ensure voltage matches fan requirements. If connections are secure and power is present, the fan may be faulty and require replacement. |
| Fan is noisy | Dust accumulation; Loose mounting screws; Obstruction; Worn bearings. | Clean fan blades and housing. Tighten mounting screws. Remove any obstructions. If noise persists, bearings may be worn, and the fan may need replacement. (Note: This model has a rated noise level of 30 dB-A, which is audible.) |
| Insufficient airflow | Dust accumulation; Incorrect orientation; Obstruction. | Clean fan blades and grille. Verify fan is oriented correctly for desired airflow. Remove any obstructions in the airflow path. |
9. Warranty and Support
For warranty information or technical support, please refer to the uxcell official website or contact your retailer. Keep your purchase receipt as proof of purchase.
Contact Information:
- Brand: uxcell
- Website: Visit the uxcell Store on Amazon (for general product information)