chiphy Dimmable 52-inch Tall Standing Floor Lamp Instruction Manual

1. Introduction

Thank you for purchasing the chiphy Dimmable 52-inch Tall Standing Floor Lamp. This manual provides detailed instructions for the safe and efficient use of your new lamp. Please read all instructions carefully before assembly and operation, and retain this manual for future reference.

Figure 1: The chiphy 52-inch Dimmable Floor Lamp, showcasing its elegant design and warm illumination.

2. Safety Instructions

• Ensure the power supply voltage matches the lamp's requirements (110 Volts).
• Do not operate the lamp with a damaged cord or plug. If damaged, contact customer support.
• Avoid placing the lamp in unstable locations where it could easily tip over.
• Keep the lamp away from water or excessive moisture, as it is designed for indoor use.
• Do not attempt to modify or disassemble the lamp beyond the instructions provided.
• Always unplug the lamp from the power outlet before cleaning or replacing bulbs.
• Use only recommended LED bulbs (E26 base, 12Wx2 LED, 2700K color temperature).

3. Package Contents

Carefully unpack all components and check against the list below. If any parts are missing or damaged, please contact chiphy customer support.

• Fabric Lampshade (Dupont Tyvek, White)
• Lamp Pole Sections (Stainless Steel)
• Base and Screws
• LED Bulbs (2x 12W, E26 base)
• Power Cord with Foot Switch
• Installation Manual

Figure 2: Key features and dimensions of the chiphy floor lamp, highlighting its robust construction and user-friendly design.

4. Assembly Instructions

Assembly is straightforward and typically takes only a few minutes. Follow these steps:

1. Connect Lamp Pole Sections: Carefully connect the stainless steel lamp pole sections, ensuring they are smoothly and tightly joined. The power cord should run through the center of the poles.
2. Attach Bulbs: Screw the provided LED bulbs into the sockets at the top of the assembled lamp pole.
3. Prepare Lampshade: Unfold the fabric lampshade. The material may appear wrinkled initially, but it will smooth out once stretched over the frame.
4. Insert Pole into Lampshade: Carefully slide the assembled lamp pole (with bulbs attached) into the fabric lampshade from the top side.
5. Secure Base: Connect the bottom of the lamp pole to the lamp base using the provided screws. Ensure the screws are tightened securely for stability.
6. Connect Top Frame: Attach the top frame of the lampshade to the top of the lamp pole. This may require some gentle squeezing to fit the tubes into place. Verify that the pole is straight and centered within the lampshade.
7. Plug In: Once fully assembled and stable, plug the power cord into a suitable electrical outlet.

Figure 3: Visual guide demonstrating the simple steps for assembling the chiphy floor lamp.

Assembly Video Guide:

Video 1: Official chiphy guide on how to assemble the soft lamp, detailing each step from unboxing to final setup.

5. Operating Instructions

The chiphy floor lamp features a convenient foot switch for operation and adjustable brightness levels.

• Power On/Off: Press the foot switch once to turn the lamp on or off.
• Adjust Brightness: The lamp offers 3 levels of adjustable brightness. With the lamp on, press the foot switch repeatedly to cycle through the brightness settings (Low, Medium, High).

Figure 4: Illustration of the lamp's 3-level brightness adjustment, providing versatile lighting options.

Operation Video Guides:

Video 2: A demonstration of the chiphy Dimmable Floor Lamp with a white lampshade, showcasing its illumination.

Video 3: A brief overview of the chiphy Dimmable Floor Lamp (H52'' W10''), highlighting its features and design.

Smart Plug Compatibility:

This lamp is compatible with smart plugs (not included), allowing for control via a mobile app or voice commands. Refer to your smart plug's instructions for setup.

Figure 5: The lamp's compatibility with smart plugs for enhanced control options.

6. Maintenance

• Cleaning: The Dupont Tyvek lampshade is stain-proof and easy to clean. Use a soft, dry cloth to wipe down the lampshade and base. For stubborn stains, a slightly damp cloth can be used, but avoid excessive moisture.
• Bulb Replacement: Ensure the lamp is unplugged before replacing bulbs. Allow bulbs to cool completely. Unscrew the old bulbs and replace them with new E26 base LED bulbs (max 12W per bulb).

7. Troubleshooting

• Lamp does not turn on:
  • Check if the power cord is securely plugged into the wall outlet.
  • Ensure the wall outlet is functional by testing it with another device.
  • Verify that the LED bulbs are screwed in correctly and are not faulty.
• Brightness levels are not changing:
  • Ensure you are pressing the foot switch correctly to cycle through the settings.
  • If using a smart plug, ensure it is configured correctly and not interfering with the lamp's built-in dimmer.
• Lampshade appears wrinkled:
  • The fabric is designed to smooth out when stretched. Ensure the top and bottom frames are properly secured and tensioned.

8. Specifications

9. Warranty and Support

chiphy products come with a standard warranty and dedicated customer support. For any questions, issues, or warranty claims, please contact chiphy customer service through the retailer's platform or directly via the contact information provided in your product packaging. Please have your model number (SF210-107(A)) and purchase date ready when contacting support.