1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your EVERSECU ES-46F-MX Mini PTZ Analog Dome Camera. This high-speed dome camera features 1080P resolution, 4X optical zoom, 65ft IR night vision, and an IP66 weatherproof, full-metal, vandal-proof design, making it suitable for outdoor surveillance applications.
2. Product Features
- High Definition Video: 1080P (2MP) resolution for clear surveillance footage.
- Optical Zoom: 4X motorized optical zoom (2.8-12mm) for detailed viewing.
- Pan/Tilt Functionality: 355° pan and 90° tilt rotation for wide area coverage.
- Infrared Night Vision: Up to 65ft (20 meters) IR distance for effective monitoring in low-light conditions.
- Weatherproof Design: IP66 rated for outdoor use, resistant to dust and water.
- Durable Construction: Full metal, vandal-proof housing.
- Analog Connectivity: RS485 control for PTZ functions, compatible with DVR systems.

Image: The EVERSECU Mini PTZ Camera showcasing its vandal-proof design, 4X motorized zoom lens, and 355° pan with 90° tilt rotation capabilities.

Image: Illustration of the camera's IP66 weatherproof rating, demonstrating resistance to rain, sun, cold, and dust.
3. Installation
3.1 Mounting the Camera
The camera features a twist-on bracket for straightforward mounting. Ensure the mounting surface is stable and can support the camera's weight. For optimal pan/tilt range, consider shimming the mounting plate if necessary to achieve a slightly higher vertical angle than the internal limit.

Image: Diagram illustrating the 355° pan and 90° tilt rotation capabilities of the camera.
3.2 Wiring Connections
Connect the camera to your Digital Video Recorder (DVR) system. This analog camera requires video, power, and RS485 control wires. Ensure correct polarity for the RS485 connection to enable PTZ control.
- Video: Connect the BNC connector to your DVR's video input.
- Power: Connect the power cable to a suitable 12V DC power supply. Use the robust power supply provided with the camera to avoid video noise.
- RS485 Control: Connect the two RS485 wires to the corresponding terminals on your DVR. This is the recommended method for PTZ control.

Image: An internal view of the camera, highlighting the 4X motorized zoom HD lens and internal components.
3.3 Initial Configuration (DVR Settings)
After physical installation, configure your DVR for PTZ control:
- Protocol: Set the PTZ protocol to Pelco-D in your DVR settings.
- Communication Settings: Configure the communication parameters as 2400, 8, None, 1.
- Address: Assign a unique address to each PTZ camera. If you have only one camera, addresses 1 or 254 are typically defaulted. If multiple cameras are used, ensure each has a distinct address to prevent conflicts.
4. Operation
4.1 PTZ Control
Control the camera's pan, tilt, and zoom functions directly from your DVR interface. Use the directional controls for pan (left/right) and tilt (up/down). The 4X optical zoom allows you to magnify specific areas for closer inspection.
Video: Demonstration of the 4X optical zoom and PTZ capabilities of the EVERSECU 1080P PTZ Camera, showing its ability to zoom in on distant objects.
4.2 Accessing the OSD Menu
The On-Screen Display (OSD) menu allows for advanced camera settings adjustments. To access the OSD menu:
- From your DVR's PTZ control box, send Preset 95.
- Once the OSD appears, use the pan/tilt controls to navigate and the zoom controls to select options or adjust values.
- The menu will automatically disappear after a few seconds of inactivity.
4.3 Changing Camera Address (Optional)
If you need to change the camera's address from the default (1 or 254):
- Send Preset 91, then immediately send the desired new address number as a preset. This is a two-stage process.
5. Maintenance
- Cleaning: Regularly clean the camera's dome with a soft, damp cloth to ensure clear image quality. Avoid abrasive cleaners.
- Weather Protection: While the camera is IP66 rated, periodic inspection of seals and mounting points is recommended, especially in harsh weather conditions, to maintain its weatherproof integrity.
- Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure optimal performance and security.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No video signal or poor image quality. | Loose video cable connection, incorrect video format, insufficient power. | Check BNC cable connections. Ensure DVR supports 1080P analog input. Verify power supply is adequate and properly connected. |
| PTZ functions not responding. | Incorrect RS485 wiring polarity, wrong protocol/baud rate, conflicting camera addresses. | Verify RS485 wiring. Set DVR protocol to Pelco-D and communication to 2400, 8, None, 1. Ensure each camera has a unique address. |
| Video noise during PTZ movement. | Normal operation for some analog PTZ cameras, or power supply issues. | This can be normal; noise should disappear when the camera settles. Ensure a robust power supply is used. |
| Poor night vision performance. | IR illuminators obstructed, camera settings, external light interference. | Ensure the camera's IR LEDs are not obstructed. Check OSD settings for night vision mode. Consider external IR illuminators if needed. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | ES-46F-MX |
| Brand | EVERSECU |
| Indoor/Outdoor Usage | Outdoor |
| Compatible Devices | DVR |
| Power Source | Corded Electric |
| Connectivity Protocol | Wi-Fi (Note: This model primarily uses wired analog and RS485 for control) |
| Controller Type | Iris |
| Mounting Type | Surface Mount |
| Video Capture Resolution | 1080p, 720p |
| Number of Items | 1 |
| Number of Channels | 1 |
| Wireless Communication Technology | Wired |
| Form Factor | Dome |
| Material | Metal |
| Wattage | 10 watts |
| Batteries Required? | No |
| Optical Zoom | 4 x |
| Focus Type | Auto Focus, Manual Focus |
| Low light technology | Night Color |
| Zoom Type | Optical Zoom |
| Alert Type | Motion Only |
| Light Source Type | LED |
| Video Capture Format | MPEG-4 |
| Unit Count | 1 Count |
| Photo Sensor Technology | CMOS |
| International Protection Rating | IP66 |
| Maximum Webcam Image Resolution | 2 MP |
| Control Method | Remote |
| Item Weight | 1.7 pounds |
| Manufacturer | EVERSECU |
| Recommended Uses For Product | Outdoor Security |
| Special Feature | Night Vision, PTZ Technology |

Image: Diagram showing the product dimensions of the camera, with a diameter of 110mm and height of 96mm.
8. Warranty and Support
For warranty information and technical support, please refer to the official EVERSECU website or contact their customer service directly. Keep your purchase receipt for warranty claims.