Solo Stove Bonfire Stand Instruction Manual

1. Introduction

The Solo Stove Bonfire Stand is a durable 304 stainless steel accessory designed to elevate your Solo Stove Bonfire fire pit. This stand provides a heat-resistant barrier, allowing for safe use on heat-sensitive surfaces such as wooden decks, grass, or turf. Its portable design enhances the versatility of your fire pit, making it an ideal companion for outdoor gatherings and camping trips.

2. Safety Information

• Always ensure the stand is placed on a stable, level surface before placing the fire pit.
• While the stand is designed to reduce heat transfer, exercise caution and monitor the surface beneath the fire pit during and after use.
• Keep children and pets away from the fire pit and stand during operation.
• Do not move the fire pit or stand while a fire is burning or while hot. Allow both to cool completely before handling.
• Ensure adequate clearance from combustible materials (e.g., buildings, trees, dry leaves).

3. Components

The Solo Stove Bonfire Stand package includes:

• 1 x Solo Stove Bonfire Stand (Stainless Steel Ring)

4. Setup

1. Select a suitable location for your Solo Stove Bonfire. Ensure the surface is flat, stable, and clear of any flammable materials.
2. Place the Solo Stove Bonfire Stand directly on your chosen surface.
3. Carefully lift your Solo Stove Bonfire fire pit and center it onto the stand. Ensure the fire pit sits securely within the stand's perimeter.

5. Operating Instructions

The Solo Stove Bonfire Stand is designed to create a protective air gap between the hot base of the fire pit and the ground. The perforations in the stand allow for continuous airflow, preventing excessive heat buildup on the underlying surface. This ensures that your deck, grass, or other heat-sensitive areas remain protected from heat damage.

Once the fire pit is securely placed on the stand, you can proceed with lighting your fire according to your Solo Stove Bonfire's instructions.

6. Care and Maintenance

• Allow the stand to cool completely before cleaning.
• Wipe down the stainless steel stand with a damp cloth to remove any ash or debris. For stubborn stains, a mild stainless steel cleaner can be used.
• Avoid using abrasive cleaners or scouring pads, as these can scratch the stainless steel surface.

7. Storage

The Solo Stove Bonfire Stand is designed for convenient storage. It can be nested inside your Solo Stove Bonfire fire pit when not in use, saving space and making it easy to transport.

8. Specifications

9. Warranty & Support

For warranty information and customer support, please refer to the official Solo Stove website or contact their customer service directly. Keep your purchase receipt for any warranty claims.

For additional resources and product information, visit the Solo Stove Brand Store.