1. Introduction
The Einhell TE-PS 165 plunge cut circular saw is a powerful and versatile tool designed for precise cutting in various materials. This manual provides essential information for the safe and effective use of your saw.
Equipped with a 1200 W motor, the high-quality carbide blade enables cutting depths of up to 66 mm at a 90° angle (without a guide rail). For angle cuts up to 45°, depths of up to 48 mm (without a guide rail) are achievable. The design ensures clean cuts, even when working close to edges.
Cutting depth and tilt angle can be easily adjusted without the need for additional tools. A blade lock mechanism facilitates quick and convenient blade changes. The extended cable provides a wide operating radius, enhancing flexibility during use. A parallel stop is included to assist in achieving straight cuts, and a dust extraction adapter helps maintain a clean workspace. The large, ergonomic handle is designed for comfortable, fatigue-free operation.
For enhanced precision, a guide rail system is available separately. Special plastic supports allow for precise adjustment of the guide rail.
2. Safety Instructions
Always observe general safety regulations when operating power tools. Read and understand all instructions before operating the saw. Keep the work area clean and well-lit. Ensure proper footing and balance. Wear appropriate personal protective equipment, including eye protection, hearing protection, and gloves. Disconnect the saw from the power supply before making any adjustments, changing accessories, or storing the tool. Keep children and bystanders away while operating a power tool. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
3. Product Overview
The Einhell TE-PS 165 plunge cut circular saw is designed for precision and ease of use. Familiarize yourself with its main components:
- Main Handle: For primary grip and control.
- Auxiliary Handle: Provides additional stability and control during operation.
- Saw Blade: 165mm carbide-tipped blade for various materials.
- Blade Guard: Protects the user from the rotating blade.
- Depth Adjustment Mechanism: Allows tool-free setting of cutting depth.
- Angle Adjustment Mechanism: Enables tool-free setting of tilt angle for bevel cuts.
- Blade Lock Button: For easy and safe blade changes.
- Dust Extraction Port: Connects to a vacuum cleaner for a cleaner workspace.
- Parallel Stop: Attachable guide for making straight cuts.
An image showing the Einhell TE-PS 165 plunge cut circular saw from a three-quarter front view. The saw features a silver-grey housing, a red and black handle, and a visible circular saw blade with a 165mm diameter. The Einhell logo and model number 'TE-PS 165' are visible on the side.
4. Setup
- Unpacking and Inspection: Carefully remove the saw and all accessories from the packaging. Inspect for any damage. Ensure all components listed in the product documentation are present.
- Blade Installation/Change:
- Ensure the saw is unplugged from the power source.
- Press and hold the blade lock button to secure the saw blade.
- Use the appropriate tool (usually an Allen key, not specified if included) to loosen the blade retaining screw.
- Carefully remove the old blade and install the new 165mm blade, ensuring the rotation direction matches the arrow on the saw.
- Tighten the retaining screw securely while holding the blade lock.
- Adjusting Cutting Depth: The cutting depth can be adjusted without tools. Locate the depth adjustment lever/knob and set it to the desired depth for your material.
- Adjusting Tilt Angle: For bevel cuts, the tilt angle can also be adjusted without tools. Locate the angle adjustment mechanism and set it to the required angle (up to 45°).
- Connecting Dust Extraction: For a cleaner work environment, connect a suitable vacuum cleaner hose to the dust extraction port on the saw.
- Attaching Parallel Stop: If making straight cuts, attach the parallel stop to the saw base as instructed in the product's specific diagram (refer to product packaging for visual guide). Adjust its position to achieve the desired cutting width.
5. Operating Instructions
- Workpiece Preparation: Securely clamp the workpiece to prevent movement during cutting. Mark your cut line clearly.
- Power Connection: Plug the saw into a suitable power outlet (230 Volts).
- Starting the Saw: Hold the saw firmly with both hands. Press the safety switch (if present) and then the trigger switch to start the motor. Allow the blade to reach full speed before beginning the cut.
- Making a Plunge Cut: Position the front of the saw base on the workpiece with the blade retracted. Slowly lower the blade into the material along the marked line. Maintain a steady, controlled feed rate.
- Making Straight Cuts: For straight cuts, use the parallel stop or an optional guide rail. Guide the saw smoothly along the guide, applying even pressure.
- Making Angle Cuts: After setting the desired tilt angle, proceed with the cut as described for straight or plunge cuts, ensuring the saw maintains the set angle throughout the operation.
- Finishing the Cut: Once the cut is complete, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
- Material Considerations: The saw is suitable for wood, panels, and plastics. Adjust cutting depth and feed rate according to the material's hardness and thickness.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Einhell TE-PS 165 plunge cut circular saw.
- Cleaning: After each use, disconnect the saw from the power supply. Use a brush or compressed air to remove dust and debris from the motor vents, blade guard, and base plate. Do not use water or solvents.
- Blade Care: Inspect the saw blade regularly for sharpness and damage. A dull or damaged blade can lead to poor cut quality and increased motor strain. Replace worn blades promptly.
- Cord Inspection: Periodically check the power cord for cuts, fraying, or damage. If damaged, have it repaired by a qualified technician.
- General Inspection: Check all screws and fasteners for tightness. Ensure all moving parts operate smoothly. Lubricate as recommended by the manufacturer (refer to specific product manual for details, if any).
7. Troubleshooting
This section addresses common issues you might encounter with your plunge cut circular saw. For problems not listed here, contact qualified service personnel.
| Problem | Possible Cause | Solution |
|---|---|---|
| Saw does not start | No power supply; faulty switch; damaged cord | Check power connection; inspect cord; consult service technician |
| Poor cut quality (splintering, rough edges) | Dull or incorrect blade; incorrect cutting depth/speed; workpiece not secured | Replace blade; use appropriate blade for material; adjust settings; secure workpiece firmly |
| Saw motor overheats | Overloading; blocked ventilation slots; dull blade | Reduce load; clean ventilation slots; replace blade |
| Excessive vibration | Loose blade; damaged blade; internal component issue | Check blade tightness; replace damaged blade; consult service technician |
8. Specifications
| Feature | Detail |
|---|---|
| Model | TE-PS 165 |
| Power Input | 1200 Watts |
| Voltage | 230 Volts |
| Blade Diameter | 165 mm |
| Max. Cutting Depth (90°) | 66 mm (without guide rail) |
| Max. Cutting Depth (45°) | 48 mm (without guide rail) |
| Weight | 5.3 Kilograms |
| Dimensions (L x W x H) | 34.3 x 24.2 x 23 cm |
| Blade Material | Carbide |
| Power Source | Corded Electric |
| Special Features | Depth adjustment, Tool-free angle adjustment, Blade lock, Dust extraction adapter, Parallel stop |
9. Warranty and Support
Warranty information for the Einhell TE-PS 165 plunge cut circular saw is typically provided with the product packaging or can be obtained from the manufacturer's official website. Please retain your proof of purchase for warranty claims.
Information regarding the availability of spare parts is not explicitly provided in the product details. For service, technical support, or inquiries about spare parts, please contact Einhell customer service or an authorized service center.
