Passion-Electro SQ552-1ELA
Contents
Replacement Remote Control for PHILIPS SQ552-1ELA TV
Model: SQ552-1ELA | Brand: Passion-Electro
Introduction
This manual provides comprehensive instructions for the use and maintenance of your Passion-Electro replacement remote control, specifically designed for PHILIPS SQ552-1ELA TV models. This specialized remote offers full functionality comparable to your original remote control without the need for complex programming.

Figure 1: Front view of the Passion-Electro replacement remote control, showing the button layout and brand logo.
Safety Information
- Keep the remote control away from water and excessive moisture.
- Avoid dropping the remote control or subjecting it to strong impacts.
- Do not expose the remote control to direct sunlight or extreme temperatures.
- Keep batteries out of reach of children. If swallowed, seek immediate medical attention.
- Dispose of used batteries according to local regulations.
Package Contents
Please verify that all items are present in the package:
- 1 x Passion-Electro Replacement Remote Control (Model: SQ552-1ELA)
- (Batteries are not included)
Setup
1. Battery Installation
The remote control requires two 1.5V AAA (LR03) batteries. Ensure correct polarity when inserting the batteries.
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch to open the compartment.
- Insert two AAA batteries, matching the positive (+) and negative (-) terminals as indicated inside the compartment.
- Close the battery compartment cover by sliding it back into place until it clicks securely.

Figure 2: Bottom view of the remote control, highlighting the battery compartment.

Figure 3: Back view of the remote control, showing the battery cover.
2. Initial Use
This remote control is pre-programmed for PHILIPS SQ552-1ELA TV models. No additional programming is required. Once batteries are installed, it is ready for immediate use.
Operating Instructions
The remote control provides access to all standard functions of your PHILIPS TV. Refer to your TV's user manual for specific functions if needed.
Key Functions Overview

Figure 4: Top-down view of the remote control, illustrating the full button layout.
| Button Name | Function |
|---|---|
| Power | Turns the TV on or off. |
| Mute | Mutes or unmutes the TV sound. |
| TV/SAT/DVD/AUX | Selects input source (if applicable). |
| Number Buttons (0-9) | Direct channel selection. |
| Volume Up/Down (+/-) | Adjusts the volume level. |
| Channel Up/Down (P+/P-) | Changes TV channels. |
| Navigation (Up, Down, Left, Right, OK) | Navigates menus and confirms selections. |
| Menu | Opens the TV's main menu. |
| Exit | Exits current menu or function. |
| Source | Cycles through available input sources. |
| Info | Displays program information. |
| Back | Goes back to the previous screen or menu. |
| Smart/Netflix/Colored Buttons | Accesses smart TV features or specific applications (functionality may vary based on TV model). |
Maintenance
Cleaning the Remote Control
To maintain the remote control's appearance and functionality:
- Wipe the surface with a soft, dry cloth.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner.
- Do not use harsh chemicals, solvents, or abrasive cleaning pads.
Battery Replacement
Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA 1.5V).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not working. | Dead or incorrectly inserted batteries. | Check battery polarity. Replace batteries with new ones. |
| Remote control range is poor. | Low batteries; Obstruction between remote and TV; Remote sensor on TV is blocked. | Replace batteries. Ensure clear line of sight to TV. Clear any obstructions from TV's IR sensor. |
| Certain buttons do not respond. | Button malfunction; TV model incompatibility for specific advanced functions. | Ensure the remote is pointed directly at the TV. While this remote is designed for the specified model, some advanced TV-specific functions might not be fully supported if they require unique codes not present in the replacement. |
| LED indicator not lighting up. | No power; Faulty remote. | Check and replace batteries. If problem persists, the remote may be faulty. |
Specifications
| Brand | Passion-Electro |
| Model Number | SQ552-1ELA |
| Compatible Devices | PHILIPS TV (SQ552-1ELA series) |
| Connectivity Technology | Infrared (IR) |
| Color | Black |
| Power Source | 2 x AAA 1.5V Batteries (not included) |
| Number of Buttons | 25 |
| Maximum Range | 10 Meters (approx. 33 feet) |
| Country of Origin | China |
Warranty and Support
For information regarding warranty, returns, or technical support, please refer to the seller's policy on the product purchase page or contact Passion-Electro directly through the retailer's platform.
This product is designed to provide functionality similar to an original remote control. If you encounter issues not covered in the troubleshooting section, please reach out for assistance.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.