Introduction
This manual provides essential instructions for the safe and effective use of your Orno AE-13114 Plug-in Dimmer Switch. Please read it thoroughly before operating the device and retain it for future reference.
Safety Information
Always observe the following safety precautions:
- Ensure the dimmer is used with compatible dimmable light sources only.
- Do not exceed the maximum load of 280W.
- This device is designed for indoor use only.
- Keep out of reach of children.
- Do not disassemble or modify the device.
- The protective clip provides contact protection, ensuring safe use.
Product Overview
The Orno AE-13114 is a compact plug-in dimmer switch designed for easy control of dimmable lighting. It features a rotary control for stepless adjustment of light intensity.
Figure 1: Front view of the Orno AE-13114 Plug-in Dimmer Switch, showing the rotary control knob and the integrated power plug.
Figure 2: Back view of the Orno AE-13114 Plug-in Dimmer Switch, displaying the product label with model number and electrical specifications, along with the socket for connecting a lamp.
Setup
- Unpack: Carefully remove the dimmer switch from its packaging.
- Connect Lamp: Ensure your lamp is unplugged. Plug the lamp's power cord into the socket on the front of the Orno AE-13114 dimmer switch.
- Plug into Wall Outlet: Insert the Orno AE-13114 dimmer switch into a standard 230V wall outlet. No complex installation is required.
- Verify Compatibility: Confirm that the light source in your lamp is dimmable and does not exceed the dimmer's maximum load of 280W.
Operating Instructions
The Orno AE-13114 features a simple rotary control for adjusting light intensity.
- Turn On/Off: Rotate the knob clockwise from the 'OFF' position until you hear a click and the light turns on. To turn off, rotate the knob counter-clockwise until it clicks into the 'OFF' position.
- Adjust Brightness: Once the light is on, continue rotating the knob clockwise to increase brightness or counter-clockwise to decrease brightness. The dimmer provides stepless adjustment from full light output to complete extinction.
- Compatible Devices: This dimmer is suitable for controlling floor lamps, table lamps, bedside lamps, and other devices equipped with dimmable light sources.
Maintenance
To ensure the longevity and proper functioning of your dimmer switch:
- Cleaning: Disconnect the dimmer from the power outlet before cleaning. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: If storing the device for an extended period, keep it in a cool, dry place away from direct sunlight.
- Inspection: Periodically check the device and its connections for any signs of damage. If damage is observed, discontinue use immediately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or hums. |
|
|
| Dimmer feels warm. | Normal operation, or excessive load. | A slight warmth is normal. If it feels excessively hot, disconnect immediately and check total wattage of connected lamps. Ensure it does not exceed 280W. |
Specifications
| Model | AE-13114 |
| Brand | Orno |
| Operating Voltage | 230 Volts |
| Maximum Load | 280W |
| Minimum Load | 40W |
| Dimensions (L x W x H) | 5.6 x 9.6 x 7.9 cm |
| Weight | 130 grams |
| Material | Polycarbonate |
| Country of Origin | China |
Note: Specifications are subject to change without prior notice.
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
Manufacturer: ORNO-LOGISTIC Sp. z o.o., ul. Rolników 437, 44-141 Gliwice, POLAND
