Hyper Tough 24-INCH Fluorescent Black Light Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your Hyper Tough 24-inch fluorescent black light. Please read this manual thoroughly before installation and operation, and retain it for future reference.

The Hyper Tough 24-inch fluorescent black light is designed for various applications including illuminating black light posters, enhancing Halloween decorations, general lighting decorations, and creating neon/cosmic lighting effects. It operates at 17 watts and features a 24-inch fluorescent tube within a 31-inch fixture.

Figure 1: Hyper Tough 24-inch Black Light packaging illustrating typical uses.

Important Safety Information

Always follow basic safety precautions when using electrical products to reduce the risk of fire, electric shock, and personal injury.

• Read all instructions: Before operating the fixture, read all safety and operating instructions.
• Indoor use only: This product is designed for indoor use only. Do not expose to water or moisture.
• Proper voltage: Ensure the power source matches the fixture's voltage requirements (120 Volts AC).
• Unplug before servicing: Always unplug the fixture from the power outlet before cleaning, replacing the bulb, or performing any maintenance.
• Avoid direct eye exposure: Do not stare directly into the black light tube for extended periods.
• Keep away from children: This product is not a toy. Keep out of reach of children.
• Use correct bulb: Only use a 24-inch fluorescent black light tube as specified.
• Secure mounting: Ensure the fixture is securely mounted to prevent it from falling.

Package Contents

Verify that all items listed below are included in your package. If any parts are missing or damaged, do not attempt to assemble or use the product. Contact customer support for assistance.

• 1 x 24-inch Black Light Fluorescent Tube
• 1 x 31-inch Black Light Fluorescent Fixture
• 2 x Wood Screws (for mounting)
• 1 x Installation Instructions (separate sheet)

Figure 2: Packaging detail showing included components and specifications.

Setup and Installation

Follow these steps to properly set up and install your black light fixture. Refer to the separate "Installation Instructions" sheet included in your package for detailed diagrams and specific mounting guidance.

1. Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
2. Select Location: Choose a suitable indoor location for mounting the fixture. Ensure it is near a standard 120V AC power outlet and away from moisture.
3. Mount Fixture: Using the provided wood screws, securely mount the 31-inch fluorescent fixture to a wall or other stable surface. Ensure the mounting surface can support the weight of the fixture. (Refer to the separate installation instructions for specific mounting hole locations and techniques.)
4. Install Fluorescent Tube: Gently insert the 24-inch black light fluorescent tube into the fixture. Ensure it is seated correctly and securely.
5. Connect Power: Plug the fixture's power cord into a standard 120V AC wall outlet.

Figure 3: Hyper Tough 24-inch Black Light fixture in packaging.

Operating Instructions

The Hyper Tough black light fixture features a simple push-button on/off switch for easy operation.

1. Power On: Once the fixture is securely mounted and plugged into a power outlet, locate the push-button switch on the fixture. Press the button to turn the black light ON.
2. Power Off: To turn the black light OFF, press the push-button switch again.
3. Unplug when not in use: For energy conservation and safety, unplug the fixture from the wall outlet when it will not be used for extended periods.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your black light fixture.

Cleaning

• Disconnect Power: Always unplug the fixture before cleaning.
• Wipe Down: Use a soft, dry cloth to wipe the exterior of the fixture and the fluorescent tube.
• Avoid Liquids: Do not use liquid cleaners, abrasive cleaners, or solvents, as these can damage the finish or electrical components.

Bulb Replacement

When the fluorescent tube reaches the end of its life or becomes dim, it will need to be replaced.

1. Disconnect Power: Unplug the fixture from the wall outlet.
2. Allow to Cool: If the light was recently on, allow the tube to cool completely before handling.
3. Remove Old Tube: Carefully twist and pull the old 24-inch fluorescent tube from its sockets.
4. Install New Tube: Insert a new 24-inch black light fluorescent tube (T8 bulb shape, GU24 base) into the sockets, ensuring it is securely seated.
5. Dispose Properly: Dispose of the old fluorescent tube according to local regulations for hazardous waste, as it may contain mercury.
6. Reconnect Power: Plug the fixture back into the wall outlet.

Troubleshooting

If you encounter issues with your Hyper Tough black light, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, contact Hyper Tough customer support.

Specifications

Warranty and Support

Specific warranty information for this Hyper Tough product was not provided in the product details. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official Hyper Tough website.

Always retain your proof of purchase for warranty purposes.