XP Metal Detectors X35 9-inch Search Coil Instruction Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your XP Metal Detectors X35 9-inch Search Coil (Model D01X35). This wireless, waterproof search coil is designed for use with XP DEUS and ORX metal detectors, offering advanced frequency capabilities for enhanced metal detection.

Image: The XP Metal Detectors X35 9-inch Search Coil, a wireless and waterproof accessory for metal detectors.

Setup

Follow these steps to correctly attach and prepare your X35 9-inch Search Coil for use.

1. Attach the Lower Stem: Secure the provided lower stem to your metal detector's shaft.
2. Mount the Search Coil: Attach the X35 9-inch search coil to the lower stem using the fixing kit. Ensure it is securely fastened.
3. Install Coil Cover: Place the coil cover over the search coil to protect it from scratches and impacts during use.
4. Pairing: Power on your XP DEUS or ORX metal detector. Navigate to the coil pairing menu and select the X35 9-inch coil. Follow the on-screen instructions to establish a wireless connection.
5. Initial Settings: Access the detector's menu to adjust initial settings such as frequency, sensitivity, and discrimination according to your detecting environment and target preferences.

Image: The X35 9-inch search coil shown with its included lower stem and coil cover, ready for assembly.

Operating

The X35 9-inch search coil offers versatile performance with its multi-frequency capabilities and robust design.

• Frequency Selection: The coil supports 5 main frequencies (4, 8, 12, 18, and 28 kHz) with 7 wide offset variations, providing a total of 35 different frequencies. This allows for optimal adaptation to various soil conditions and target types.
• Wireless Operation: Experience seamless detection with the coil's wireless technology, transmitting audio signals to your XP remote control.
• Waterproof Design: The coil is robust and waterproof up to 20 feet (6 meters), making it suitable for both land and shallow water detecting.
• Battery Life: The integrated lithium polymer battery provides approximately 15 hours of operation, depending on the selected frequency and power settings.
• Compatibility: Fully compatible with XP DEUS and ORX metal detectors.

Image: A visual representation of the X35 coil's 35 frequency options, illustrating its versatility for different target sizes and ground conditions.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your X35 search coil.

• Cleaning: After each use, especially in wet or muddy conditions, clean the coil with fresh water and a soft cloth. Avoid abrasive cleaners.
• Coil Cover: Always use the provided coil cover to protect the coil from scratches and wear. Replace it if it becomes damaged.
• Battery Care: The lithium polymer battery is designed for durability. Store the coil in a cool, dry place when not in use. Avoid extreme temperatures.
• Waterproofing: While waterproof, ensure the coil's connections are clean and free of debris before submerging. Avoid unnecessary impacts when detecting underwater.

Troubleshooting

If you encounter issues with your X35 search coil, refer to the following common solutions:

• No Signal/Intermittent Signal:
  • Ensure the coil is properly paired with your detector's remote control.
  • Check battery levels of both the coil and the remote control.
  • Verify that the coil's connection to the lower stem is secure.
  • Perform a frequency shift on your detector to avoid interference from other electronic devices.
• False Signals:
  • Reduce sensitivity settings.
  • Perform a ground balance procedure.
  • Check for electromagnetic interference from power lines or other detectors.
• Coil Not Responding:
  • Re-pair the coil with the detector.
  • Charge the coil's battery.
  • Consult your main XP DEUS or ORX metal detector manual for specific troubleshooting steps related to coil communication.

Specifications

Warranty & Support

The XP Metal Detectors X35 9-inch Search Coil is designed for durability and comes with a 5-year warranty, reflecting its "LONGTIME" certification. Repairs are available in the USA.

For technical assistance, warranty claims, or further inquiries, please contact XP Metal Detectors customer support through their official website or authorized dealers. Always refer to the official product documentation for the most up-to-date support information.

Image: Details highlighting the 5-year warranty, LONGTIME certification for durability, and availability of repairs in the USA for XP Metal Detectors products.