Phenyx Pro PTU-5000-4H 4-Channel UHF Wireless Microphone System User Manual

1. Introduction

This manual provides detailed instructions for the Phenyx Pro PTU-5000-4H 4-Channel UHF Wireless Microphone System. Please read this manual thoroughly before operating the system to ensure proper setup, optimal performance, and safe use. Retain this manual for future reference.

The Phenyx Pro PTU-5000-4H system includes one receiver unit and four handheld wireless microphones.

2. Product Overview

2.1 Box Contents

• 1 x 4-Channel UHF Wireless Receiver
• 4 x UHF Handheld Wireless Microphones
• 2 x Antennas
• 1 x Power Adapter
• 1 x 6.5 mm to 3.5 mm Cable Adapter
• 1 x 1/4'' Audio Cable
• 1 x Users Manual
• 4 x Anti-rolling Rings
• 4 x Rubber Feet
• 8 x AA Batteries (for long hour operation)

The package includes the 4-channel UHF wireless receiver, four UHF handheld microphones, two antennas, a power adapter, a 6.5mm to 3.5mm cable adapter, a 1/4'' audio cable, a user manual, four anti-rolling rings, four rubber feet, and eight AA batteries.

2.2 Key Features

• Exceptional Sound Quality: Each microphone features a high-quality dynamic cardioid cartridge for precise sound capture and noise rejection.
• UHF Wireless Performance: Fixed frequencies at 541.9 MHz, 546.3 MHz, 561.6 MHz, and 568.65 MHz ensure stable signal transmission with minimal distortion.
• Extended Range: Offers up to 260 feet of operating range.
• Durable Construction: All-metal receiver and microphone housing designed for heavy-duty use.
• User-Friendly Design: Features an LCD screen, individual volume controls, memory switch, and snap-on BNC antennas.
• Wide Compatibility: Connects to various audio equipment including amplifiers, mixers, PA systems, and karaoke machines.

Each microphone features a high-quality dynamic cardioid cartridge designed for precise sound capture and noise rejection, ensuring clear audio.

The handheld microphones are constructed with durable all-metal housing, feature a comfortable grip, and include a low battery indicator (screen turns red) and a recessed on/off switch to prevent accidental activation.

The quad-channel UHF wireless receiver features an LCD screen displaying frequency, individual volume controls for each channel, and multiple output options including balanced XLR and a 1/4'' audio jack. It requires an amplifier or speaker for sound output.

The receiver provides four balanced XLR outputs for noise-free signal transmission and diversified mixing options.

Snap-on BNC antennas allow for quick and secure connections, facilitating easy setup and dismantling.

Color-coded anti-rolling rings are included to prevent microphones from rolling off surfaces and for easy identification.

3. Setup Instructions

1. Unpack Components: Carefully remove all items from the packaging and verify that all listed components are present.
2. Install Antennas: Screw the two antennas onto the corresponding ANT A and ANT B connectors on the rear of the receiver. Ensure they are securely fastened and positioned for optimal reception.
3. Power Connection: Connect the power adapter to the receiver's power jack and then plug it into a suitable power outlet.
4. Audio Output Connection:
   • For individual microphone outputs, connect XLR cables from the receiver's balanced XLR outputs (AF OUTPUT 1-4) to your mixer or amplifier's input channels.
   • For a mixed output of all four microphones, connect the 1/4'' audio cable from the receiver's MIX OUT jack to your mixer or amplifier's input.

   Note: An amplifier or speaker is required to output sound from the system.

5. Microphone Batteries: Insert two AA batteries into each handheld microphone, ensuring correct polarity. The system includes 8 AA batteries.
6. Power On: Turn on the receiver using the ON/OFF button. Then, turn on each handheld microphone using its ON/OFF switch. The receiver's LCD screen will display the frequency and signal status.
7. Volume Adjustment: Adjust the individual volume controls (VOL 1-4) on the receiver to balance the audio levels of each microphone.

The system is designed for instant wireless operation with a memory switch that saves your last settings for quick recall.

The system offers wide compatibility with various audio output devices.

4. Operating Instructions

4.1 Microphone Usage

• Hold the microphone approximately 2-6 inches from your mouth for optimal sound pickup.
• Avoid covering the microphone grille with your hand, as this can affect sound quality and signal.
• The microphone's screen will turn red when the battery level is low, indicating it's time to replace the AA batteries.
• Utilize the included anti-rolling rings to prevent microphones from rolling off flat surfaces.

4.2 Receiver Operation

• The LCD display on the receiver shows the active frequency and signal strength for each channel.
• Adjust the individual volume knobs (VOL 1-4) on the receiver to control the output level of each microphone independently.
• The memory switch feature allows the receiver to retain its last operational settings even after being unplugged, enabling quick power-on without re-configuration.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the receiver and microphones. Avoid using harsh chemicals or abrasive cleaners.
• Battery Replacement: Replace AA batteries in the microphones promptly when the low battery indicator appears to ensure uninterrupted performance.
• Storage: When not in use for extended periods, store the system in a dry, cool place, away from direct sunlight and extreme temperatures. Remove batteries from microphones before long-term storage.
• Antenna Care: Handle antennas carefully to prevent bending or damage. Ensure they are properly connected for optimal signal.

6. Troubleshooting

Common Issues and Solutions

• No Sound Output:
  • Ensure the receiver is powered on and connected to an amplifier/speaker.
  • Check that microphones are powered on and have fresh batteries.
  • Verify all audio cables are securely connected between the receiver and the output device.
  • Adjust the volume controls on both the receiver and the connected audio device.
• Cutoffs or Static Noise:
  • Interference: Avoid using multiple personal electronic devices (e.g., cell phones, laptops) simultaneously near the system, as they can cause interference.
  • Feedback: Avoid pointing microphones directly at speakers. Adjust microphone and speaker placement to minimize feedback.
  • Range: Ensure the microphones are within the 260ft operating range of the receiver. Obstacles can reduce effective range.
  • Antennas: Check that antennas are properly installed and positioned.
• Microphone Not Connecting:
  • Ensure the microphone has fresh batteries and is powered on.
  • Verify the receiver is powered on.
  • Since this system uses fixed frequencies, ensure no other wireless devices are operating on the same frequencies.
• Multiple Systems Operation:
  • The UHF fixed frequency series is designed for single-system operation (4 channels at a time). For multiple systems, consider Phenyx Pro models with adjustable frequencies (e.g., PTU-5200 series).

To prevent cutoffs and static, avoid using personal electronics near the system and prevent microphones from pointing directly at speakers.

7. Specifications

Detailed dimensions and technical specifications are provided in the image above.

8. Warranty and Support

Phenyx Pro products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official Phenyx Pro website.

If you encounter any issues or require technical assistance, please contact Phenyx Pro customer support. Contact details can typically be found on the product packaging, the official website, or through your retailer.