Lamicall Car Vent Phone Mount Instruction Manual

Product Overview

The Lamicall Car Vent Phone Mount (Model C2-US-B) is designed to securely hold your mobile phone in your vehicle's air vent, providing hands-free access for navigation, calls, and music. Its robust design ensures stability even on uneven roads, while soft rubber cushions protect your device and car interior from scratches.

Key Features:

• Universal Compatibility: Fits most 4.7-6.7 inch mobile phones, including those with thick cases. Compatible with width sizes from 2.37” to 3.54”. Not suitable for round air vents.
• Unique Dual Grips Design: Features two vent clips for enhanced stability, preventing the mount from loosening during driving.
• Secure & Easy to Use: Retractable phone clamp holds the phone securely. Designed for single-hand insertion and removal of your device.
• Scratch Protection: Rubber cushions on the phone car clip protect both your phone and the air vent from damage.
• Adjustable Viewing: Allows for 360-degree rotation to set your phone vertically or horizontally for optimal viewing angles.

Package Contents

Please ensure all components are present before installation:

• 1 x Lamicall Car Vent Phone Mount (Phone Holder Unit)
• 1 x Vent Clip with Ball Joint
• 1 x Fixing Nut

Setup and Installation

1. Assemble the Mount:

   Unscrew the fixing nut from the vent clip. Insert the ball joint of the vent clip into the circular socket on the back of the phone holder unit. Secure it by tightening the fixing nut onto the ball joint. Ensure it is firmly attached but still allows for rotation.

   

   Image: Exploded view of the Lamicall Car Vent Phone Mount components.

2. Prepare the Vent Clip:

   Rotate the knob on the vent clip to extend the hook fully. This hook will secure the mount to your car's air vent louver.

   

   Image: Close-up of the dual clips and adjustable hook mechanism.
3. Attach to Air Vent:

   Carefully insert the vent clip's prongs into one of your car's horizontal or vertical air vent louvers. Ensure the hook is facing downwards. Once inserted, rotate the knob on the vent clip to retract the hook, firmly gripping the louver. Tighten until the mount is stable and does not move.

   

   Image: Lamicall Car Vent Phone Mount securely installed on a car's air vent.

Installation Video:

Operating Instructions

1. Inserting Your Phone:

   Gently press the top arm of the phone holder downwards. The side clamps will automatically open. Place your phone into the holder, ensuring it rests on the bottom support. Release the top arm, and the side clamps will automatically close, securing your phone.

   

   Image: Demonstrates the "Just Slide In" feature for easy phone insertion.
2. Removing Your Phone:

   To remove your phone, simply press the release button located on the back of the phone holder. The side clamps will open, allowing you to safely retrieve your device with one hand.

3. Adjusting Viewing Angle:

   The ball joint allows for 360-degree rotation. Loosen the fixing nut slightly, adjust the phone holder to your desired vertical or horizontal orientation, and then re-tighten the nut to lock it in place.

   

   Image: The phone mount allows for 360-degree rotation for optimal viewing.

Operation Video:

Maintenance

To ensure the longevity and optimal performance of your Lamicall Car Vent Phone Mount, follow these simple maintenance guidelines:

• Cleaning: Wipe the mount regularly with a soft, damp cloth to remove dust and grime. Avoid using harsh chemicals or abrasive cleaners, as these can damage the rubber cushions and plastic components.
• Check Tightness: Periodically check the tightness of the vent clip's knob to ensure it remains securely attached to the air vent. Re-tighten if necessary.
• Inspect Rubber Cushions: Ensure the rubber cushions on the phone clamp and vent clip are intact and free from damage to maintain optimal grip and protection.
• Avoid Extreme Temperatures: Prolonged exposure to extreme heat or cold can affect the material integrity. Store the mount in a moderate environment when not in use for extended periods.

Troubleshooting

If you encounter any issues with your Lamicall Car Vent Phone Mount, refer to the following common solutions:

• Mount is Loose or Falls Off Vent:
  • Ensure the vent clip's hook is fully extended and securely tightened onto the air vent louver.
  • Verify that your car's air vent is compatible (not a round vent).
  • Check if the vent louver itself is damaged or too loose to provide a stable grip.
• Phone is Not Held Securely:
  • Confirm that your phone's width is within the compatible range (2.37” to 3.54”).
  • Ensure the side clamps fully close around your phone after insertion. If not, try pressing the top arm down firmly before placing the phone.
  • Inspect the rubber cushions for wear or damage that might reduce grip.
• Difficulty Adjusting Angle:
  • Loosen the fixing nut behind the phone holder unit slightly to allow for easier rotation of the ball joint. Re-tighten once the desired angle is achieved.

Specifications

Warranty and Support

Lamicall products are designed for durability and user satisfaction. For any questions, concerns, or warranty claims, please contact Lamicall customer support through their official website or the retailer where the product was purchased. Please have your model number (C2-US-B) and purchase details ready.