Behringer X-Touch One Universal Control Surface

1. Introduction

The Behringer X-Touch One is a universal control surface designed to provide tactile control over your Digital Audio Workstation (DAW). It features a touch-sensitive, motorized fader, a dynamic LCD scribble strip, a rotary encoder, 34 illuminated buttons, an 8-segment LED meter, a large jog/shuttle wheel, and dedicated transport controls. This manual provides essential information for setting up, operating, and maintaining your X-Touch One.

2. Safety Instructions

Always read and follow all safety instructions before operating the device. Keep this manual for future reference.

• Power Source: Use only the power adapter supplied with the device. Ensure the voltage matches your local power supply.
• Water and Moisture: Do not expose the device to rain, moisture, dripping, or splashing. Do not place objects filled with liquids on the device.
• Heat: Do not place the device near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Ventilation: Ensure proper ventilation. Do not block any ventilation openings.
• Cleaning: Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.
• Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

3. Package Contents

Verify that all items listed below are included in your product packaging:

• Behringer X-TOUCH ONE Universal Control Surface
• Power Adapter

4. Product Overview

The Behringer X-Touch One provides comprehensive control over your DAW. Below is an image highlighting its key features.

Figure 1: Front view of the Behringer X-Touch One Universal Control Surface, showing the motorized fader, LCD scribble strip, rotary encoder, illuminated buttons, and jog/shuttle wheel.

Figure 2: Angled view of the Behringer X-Touch One, illustrating its compact design and various controls from a different perspective.

Key Features:

• Touch-Sensitive Motorized Fader: A 100 mm motorized fader provides precise, real-time control over track levels and automation, with tactile feedback.
• LCD Scribble Strip: A dynamic LCD display provides instant visual feedback for track names, parameters, and control values.
• Rotary Encoder: A multi-purpose rotary encoder for fine-tuning parameters and navigation.
• Illuminated Buttons: 34 illuminated buttons for various functions, including transport controls, channel selection, and function assignments.
• 8-Segment LED Meter: Visual level metering for accurate monitoring.
• Jog/Shuttle Wheel: A large, weighted jog/shuttle wheel for precise timeline navigation and editing.
• Transport Controls: Dedicated buttons for Play, Stop, Record, Fast Forward, Rewind, and Cycle.

5. Setup

Follow these steps to connect your Behringer X-Touch One to your computer:

1. Power Connection: Connect the included power adapter to the 'DC IN' port on the rear of the X-Touch One and plug it into a power outlet.
2. USB Connection: Connect the X-Touch One to your computer using a standard USB cable. The device is class-compliant and typically does not require additional drivers for basic functionality on Mac and PC.
3. DAW Configuration: Open your Digital Audio Workstation (DAW) and navigate to its control surface settings. Select the X-Touch One and configure it to use the appropriate communication protocol (e.g., Mackie Control, HUI). Refer to your DAW's manual for specific instructions on adding and configuring control surfaces.
4. Power On: Once connected, the X-Touch One will power on and initialize.

6. Operating

The X-Touch One offers intuitive control over your DAW. Here are some common operations:

6.1. Basic Controls

• Motorized Fader: Move the fader up or down to adjust the volume of the selected track. The fader will automatically snap to the correct position when switching tracks or recalling automation.
• Transport Controls: Use the dedicated buttons for Play, Stop, Record, Fast Forward, Rewind, and Cycle to control your DAW's transport functions.
• Jog/Shuttle Wheel: Rotate the large jog/shuttle wheel to navigate through your project timeline. The inner ring provides fine control (jog), while the outer ring allows for faster scrubbing (shuttle).
• Channel Selection: Use the 'CHANNEL' up/down buttons to navigate between tracks in your DAW. The motorized fader will automatically adjust to the selected track's level.

6.2. Automation

The motorized fader is crucial for writing and viewing automation. When automation is enabled in your DAW, the fader will move to reflect recorded automation data. You can also manually move the fader to write new automation in real-time.

6.3. Customization with Overlays

The X-Touch One comes with various overlay templates designed for popular DAWs. These overlays indicate the typical button functions for each specific DAW, enhancing workflow and usability.

Figure 3: Various DAW overlay templates for the X-Touch One, allowing users to customize button labels for different software.

To use an overlay, simply place it over the control surface, aligning it with the buttons and displays. This provides a visual guide for the functions assigned to each button in your specific DAW.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your X-Touch One.

• Cleaning: Use a soft, dry cloth to wipe down the surface of the device. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
• Dust Protection: When not in use, cover the X-Touch One to protect it from dust and debris, especially the motorized fader and rotary encoder.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter issues with your X-Touch One, try the following troubleshooting steps:

• Device Not Powering On:
  • Ensure the power adapter is securely connected to both the device and a working power outlet.
  • Verify that the power outlet is supplying power.
• No Response in DAW:
  • Check the USB connection between the X-Touch One and your computer. Try a different USB port or cable.
  • Verify that the X-Touch One is correctly configured in your DAW's control surface settings, using the appropriate protocol (Mackie Control, HUI).
  • Restart your DAW and/or computer.
  • Ensure no other applications are conflicting with the MIDI/control surface connection.
• Motorized Fader Not Moving:
  • Check if the fader is enabled and properly assigned in your DAW.
  • Ensure there are no physical obstructions preventing the fader from moving freely.
  • Verify that the correct control surface protocol is selected in your DAW.
• Buttons Not Responding:
  • Confirm that the correct DAW overlay is being used, if applicable, and that the buttons are assigned to the desired functions within your DAW.
  • Check for any firmware updates for the X-Touch One on the Behringer website.

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the official Behringer website or contact their customer service. Keep your proof of purchase for warranty claims.

Online Resources: Visit the Behringer website for product registration, manuals, drivers, and support forums.