ePathChina 12V 100W Car Siren Horn with 7 Sounds and Remote Controller
Model: EPC_AUP_439
Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ePathChina 12V 100W Car Siren Horn with Wireless Remote Controller. This device is designed to produce 7 distinct loud sounds for various signaling purposes. Please read this manual thoroughly before use to ensure proper function and safety.
Image: The ePathChina car siren horn and its remote controller, illustrating its compatibility with various 12V vehicles.
Safety Information
- Ensure the supply voltage is 12V DC. Incorrect voltage can damage the unit and pose a safety risk.
- Verify all cable connections are correct and secure before powering on the device.
- This siren is intended for signaling purposes. It is not designed as a replacement for professional emergency vehicle equipment.
- Be aware of local regulations regarding the use of siren sounds on public roadways. Use of certain tones may be restricted or illegal in some areas.
- Avoid prolonged exposure to the loud sounds produced by the siren to prevent hearing damage.
Package Contents
- 1 x Car Siren Horn Unit
- 1 x Wireless Remote Controller
Specifications
| Feature | Detail |
|---|---|
| Brand | ePathChina |
| Model Number | EPC_AUP_439 |
| Color | Black |
| Power Source | Battery Powered (12V DC) |
| Voltage | 12 Volts |
| Control Method | Remote |
| Audible Noise | 150 dB |
| Siren Sounds | 7 (Hooter, Fire Alarm, Ambulance, Traffic, Police, etc.) |
| Item Weight | 0.52 kg |
| Dimensions (Siren) | 180 x 170 x 120 mm / 7.09 x 6.69 x 4.72 inches |
Image: Detailed dimensions of the siren horn and remote controller.
Setup (Installation)
The siren horn requires a 12V DC power source, typically a car battery. Ensure the vehicle's electrical system is off before beginning installation.
- Mounting: Choose a suitable location for the siren horn, ensuring it is securely mounted and protected from direct water exposure if possible.
- Wiring: Connect the red wire from the siren to the positive (+) terminal of your 12V power source (e.g., car battery). Connect the black wire from the siren to the negative (-) terminal or a suitable ground point on the vehicle chassis. Ensure connections are tight and insulated.
- Testing: Once wired, turn on the vehicle's power and test the siren using the remote control.
Image: Rear view of the siren horn, illustrating the red (positive) and black (negative) wiring connections.
Video: This video demonstrates the installation process for the ePathChina car siren horn, showing how to connect it to a vehicle's 12V power source.
Operating Instructions
The siren horn is operated using the wireless remote controller. Each button on the remote activates a specific sound or function:
- Button A: Activates Tone 1.
- Button B: Activates Tone 2. Press again to stop the siren.
- Button C: Activates Tone 3.
- Button D: Cycles through 4 different tones. Press repeatedly to change the tone.
Image: The wireless remote controller, showing the labeled buttons and their corresponding functions.
Video: Watch this video to hear the 7 different siren sounds produced by the ePathChina car siren horn and how to activate them using the remote controller.
Maintenance
To ensure the longevity and optimal performance of your siren horn:
- Keep the siren unit and remote controller clean and free from dust and debris.
- Regularly check wiring connections for corrosion or looseness and secure them as needed.
- Avoid exposing the unit to extreme temperatures or harsh weather conditions for extended periods.
Troubleshooting
If your siren horn is not functioning as expected, consider the following:
- No Sound/No Response:
- Check power connections to ensure they are secure and receiving 12V DC.
- Verify the remote controller battery is functional.
- The remote controller may need to be re-matched with the siren unit. Follow the re-matching procedure below.
- Weak Sound:
- Ensure the siren's speaker opening is not obstructed.
- Check for proper voltage supply to the unit.
Remote Controller Re-matching Procedure:
- Open the back cover of the siren unit to access the internal circuit board.
- Connect the siren's wires to a 12V battery. A red LED light on the circuit board should illuminate.
- Locate and press the small white button on the siren's circuit board. The red LED light should turn off.
- Within a few seconds, press any button on your remote controller. The red LED light on the siren should turn back on, and the siren will emit a sound, indicating successful re-matching.
Video: This video provides instructions on how to re-match the remote controller's code with the siren unit if the device is not responding.
Video: A quick guide on how to re-match the remote control to the siren if it stops working.
Warranty and Support
This ePathChina product is covered by a manufacturer's warranty. The item can be returned in its original condition for replacement within 30 days of receipt, as per the manufacturer's policy.
For further assistance, technical support, or warranty claims, please refer to the contact information provided with your purchase or visit the official ePathChina website.