GE Universal Remote Control

1. Introduction and Overview

The GE UltraPro 4-Device Universal Remote Control, Model 34708, is designed to simplify your home entertainment system by consolidating control of up to four different audio and video devices into a single remote. This remote is compatible with a wide range of major brands and thousands of the latest devices, including TVs, Blu-ray/DVD players, streaming media players, cable/satellite receivers, and soundbars.

Key features include multi-device control, a comprehensive code library, simple setup procedures, and a comfortable ergonomic design. It comes pre-programmed for immediate use with Samsung TVs, offering convenience right out of the box.

Figure 1: Front view of the GE Universal Remote Control, Model 34708, showcasing its button layout.

2. Setup

2.1 Battery Installation

The remote requires two (2) AAA batteries (not included). To install, slide open the battery compartment cover on the back of the remote. Insert the batteries, ensuring correct polarity (+ and - ends match the diagram inside the compartment). Close the cover securely.

Figure 2: The remote highlighting device selection buttons and indicating the need for AAA batteries.

2.2 Programming Your Devices

The GE Universal Remote Control can be programmed using either Automatic Code Search or Direct Code Entry. The TV device button is pre-programmed for immediate use with Samsung TVs, requiring no additional setup for these specific televisions.

Automatic Code Search:

1. Ensure the device you wish to program (e.g., TV, DVD player) is turned ON.
2. Press and hold the SETUP button on the remote until the red indicator light turns on, then release.
3. Press and release the desired device button (e.g., TV, DVD, CBL) on the remote. The red indicator light will blink once and then remain lit.
4. Point the remote at the device and press the POWER button repeatedly (approximately every 2 seconds) until the device turns OFF.
5. Once the device turns OFF, press the ENTER button to lock in the code. The red indicator light will turn off.
6. Test the remote's functions (e.g., volume, channel) to ensure proper operation. If some functions do not work, repeat the process to find a more compatible code.

Direct Code Entry:

This method requires you to find the specific 4-digit code for your device brand. Refer to the code list provided with your remote or visit www.byjasco.com/remotecodes for a comprehensive list.

1. Turn ON the device you wish to program.
2. Press and hold the SETUP button on the remote until the red indicator light turns on, then release.
3. Press and release the desired device button (e.g., TV, DVD, CBL) on the remote. The red indicator light will blink once and then remain lit.
4. Using the number buttons, enter the 4-digit code for your device. After entering the last digit, the red indicator light will turn off.
5. Point the remote at the device and test its functions. If the device does not respond or some functions do not work, try another code from the list for your brand.

Figure 3: Visual guide for programming the universal remote control.

3. Operating Your Remote

Once programmed, your GE Universal Remote can control up to four different devices. To switch between devices, simply press the corresponding device button (TV, CBL, DVD, AUX) at the top of the remote.

3.1 Common Functions

• Power: Turns the selected device on or off.
• Input: Cycles through video inputs on your TV.
• Volume Control: The master volume control feature allows you to adjust the audio level regardless of which device is currently selected.
• Channel Up/Down: Changes channels on your TV or cable/satellite box.
• Navigation Pad (Up/Down/Left/Right/OK): Used for menu navigation and selection on smart TVs, streaming players, and other devices.
• Playback Controls (Play, Pause, Stop, Rewind, Fast Forward, Record): Control media playback on DVD/Blu-ray players or DVRs.
• Number Buttons: Direct channel entry or inputting codes during programming.
• Dot Button: Provides direct sub-channel access (e.g., 7.1).

Figure 4: The remote's capability to control various home entertainment devices.

4. Maintenance

4.1 Cleaning

To clean your remote control, use a soft, slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the remote's surface or internal components. Ensure no liquid enters the remote.

4.2 Battery Replacement

When the remote's performance degrades or the indicator light does not illuminate, it's time to replace the batteries. Always replace both AAA batteries simultaneously with new ones. Dispose of old batteries according to local regulations.

5. Troubleshooting

• Remote not working after programming:
  • Ensure the device is turned ON and the remote is pointed directly at it.
  • Verify that the correct device button (TV, DVD, CBL, AUX) is selected on the remote.
  • Try another code from the code list for your device brand. Some brands have multiple codes.
  • Ensure batteries are fresh and inserted with correct polarity.
• Some functions not working:
  • This often indicates that the current code is not fully compatible. Try another code for your device brand using either Automatic Code Search or Direct Code Entry.
• Remote is unresponsive:
  • Check battery levels and replace if necessary.
  • Ensure there are no obstructions between the remote and the device's infrared sensor.
• Not compatible with Roku Streaming Sticks or Amazon Fire TV/Sticks:
  • This remote operates using infrared (IR) signals and is not designed for radio frequency (RF) devices like many streaming sticks. This is normal operation and not a malfunction.

6. Specifications

Figure 5: Dimensions and ergonomic design of the remote control.

7. Warranty and Support

For specific warranty information, please refer to the documentation included with your purchase or contact the manufacturer directly. This manual does not contain detailed warranty terms.

For additional support, including the most up-to-date code lists and programming assistance, please visit the manufacturer's website: www.byjasco.com/remotecodes.

Manufacturer: Jasco Products Company, LLC

A digital version of the user manual can be found here.