Evolur Waverly 5-in-1 Convertible Crib Instruction Manual

Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Evolur Waverly 5-in-1 Convertible Crib. Please read all instructions carefully before assembly and use. Keep this manual for future reference.

Safety Information

WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death.

• Always ensure all parts are correctly assembled and tightened before use.
• Do not use this crib if any parts are missing, damaged, or broken. Contact Evolur for replacement parts.
• The mattress support must be in the lowest position when the child is able to pull to a standing position.
• Do not place the crib near windows where cords from blinds or drapes could strangle a child.
• Do not use a water mattress with this crib.
• This crib is designed for use with a standard full-size crib mattress (sold separately).
• Regularly check all screws and bolts to ensure they are tight.
• This product is JPMA & Greenguard Gold Certified, meeting high safety and environmental standards.

Product Overview

The Evolur Waverly 5-in-1 Convertible Crib is crafted from kiln-dried hardwood with fine veneers, designed to adapt as your child grows. It converts from a standard crib to a toddler bed, daybed, and full-size bed (conversion kits sold separately).

Key Features:

• 5-in-1 Convertibility: Crib, Toddler Bed, Daybed, Full-Size Bed.
• 3 Mattress Height Settings.
• Constructed from kiln-dried hardwood with fine veneers.
• JPMA & Greenguard Gold Certified.
• Rustic Grey finish.

Components:

Please ensure all components are present before beginning assembly. Refer to the separate parts list included in your packaging.

Image: The Evolur Waverly 5-in-1 Convertible Crib in Rustic Grey, showcasing its full panel design.

Assembly and Setup

Detailed assembly instructions are provided in a separate booklet within your product packaging. Please follow those instructions carefully. This section provides a general overview.

Required Tools (Not Included):

• Phillips Head Screwdriver
• Allen Wrench (often included with hardware)

General Assembly Steps:

1. Unpack all components and verify against the parts list.
2. Attach the side rails to the headboard and footboard using the provided hardware.
3. Install the mattress support frame at the desired height.
4. Ensure all bolts are securely tightened. Do not overtighten.

Image: Front view of the assembled Evolur Waverly Crib, illustrating its design.

Operating Instructions

Mattress Height Adjustment:

The Evolur Waverly crib features 3 adjustable mattress height settings.

1. Highest Setting: For newborns and infants who cannot push up on their hands and knees.
2. Middle Setting: For infants who can push up on their hands and knees but cannot pull themselves to a standing position.
3. Lowest Setting: For children who can pull themselves to a standing position. This is the safest position to prevent climbing out.

To adjust the mattress height, carefully remove the mattress, then detach the mattress support frame from the side rails. Reattach the frame at the desired height, ensuring all connections are secure.

Image: Diagram showing the dimensions of the Evolur Waverly Crib, highlighting its size and proportions.

Conversion Instructions

The Evolur Waverly 5-in-1 Convertible Crib can be transformed into a toddler bed, daybed, and full-size bed. Conversion kits are sold separately.

Toddler Bed Conversion:

To convert to a toddler bed, remove the front rail of the crib and replace it with the Evolur Universal Toddler Guard Rail (sold separately). Ensure the mattress support is in the lowest position.

Daybed Conversion:

To convert to a daybed, simply remove the front rail of the crib. No additional kit is required for this configuration. Ensure the mattress support is in the lowest position.

Full-Size Bed Conversion:

To convert to a full-size bed, remove both side rails and the mattress support. Attach the headboard and footboard to the Evolur Universal Full Size Bed Rails (sold separately). A standard full-size mattress and box spring (not included) will be required.

Image: Visual representation of the Evolur Waverly Crib transforming through its 5-in-1 conversion stages: standard crib, toddler bed, daybed, and full-size bed. Conversion kits are sold separately.

Maintenance and Care

• Cleaning: Wipe dry with a soft, damp cloth. Avoid abrasive cleaners or strong chemicals that could damage the finish.
• Inspection: Periodically check all hardware (screws, bolts) to ensure they are tight. Retighten as necessary.
• Storage: If storing the crib, disassemble it carefully and store all parts in a dry, temperature-controlled environment.

Image: Infographic highlighting key features of the Evolur Waverly Crib, including non-toxic materials, durable New Zealand Pinewood construction, ease of maintenance, and long-lasting design.

Troubleshooting

Specifications

• Model: 891-RG
• Color: Rustic Grey
• Material: Wood (Pine)
• Product Dimensions: 58.75" L x 31.25" W x 46.5" H
• Item Weight: 82 Pounds
• Maximum Weight Recommendation: 22.7 Kilograms (50 lbs)
• Maximum Height Recommendation: 35 Inches
• Certifications: JPMA, Greenguard Gold Certified
• UPC: 811048031051

Warranty and Support

For warranty information or to obtain replacement parts, please contact Evolur customer support. Refer to the contact information provided in your product packaging or visit the official Evolur website.

Manufacturer: Dream On Me

Online Support: Visit the Evolur Store on Amazon

Official Product Video

Watch the official Evolur brand video for an overview of our commitment to quality and design.

Video: An official brand video from Evolur, highlighting different nursery styles and the quality of their products.