Introduction
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Elegant Designs LF2003-WHT 2 Light Mother Daughter Marble Glass Floor Lamp. Please read all instructions carefully before use and retain this manual for future reference.
Safety Information
- Ensure the lamp is unplugged before assembly, cleaning, or bulb replacement.
- Do not use bulbs exceeding the specified wattage.
- Keep the lamp away from water or damp environments. This product is for indoor use only.
- Place the lamp on a stable, level surface to prevent tipping.
- Keep children and pets away from the lamp during operation and assembly.
- If the power cord is damaged, it must be replaced by a qualified electrician to avoid hazards.
Package Contents
Verify that all components are present before beginning assembly:
- Lamp poles
- Base
- Lamp Shades (Main and Reading Light)
Image: All components of the Elegant Designs LF2003-WHT Floor Lamp, including the base, pole sections, and two marble glass shades.
Setup Instructions
Some assembly is required for this floor lamp. Follow these steps for proper setup:
- Carefully unpack all components from the packaging.
- Begin by screwing the bottom-most pole section into the lamp base. Ensure it is securely tightened.
- Continue to screw the remaining pole sections together, working your way up. As you assemble, gently pull any excess electrical cord from the bottom of the base to prevent twisting inside the pole.
- Once all pole sections are assembled, attach the main marble glass shade to the top socket and the smaller marble glass shade to the reading light arm. Secure them with the provided socket nuts.
- Install the appropriate light bulbs (not included) into both sockets.
Image: A close-up view of the lamp's sturdy base and the lower section of the pole, illustrating the connection point for assembly.
Image: The fully assembled Elegant Designs LF2003-WHT Floor Lamp positioned next to a sofa in a living room, demonstrating its scale and appearance in a home environment.
Operating Instructions
This lamp features two lights with a rotary switch for control.
- Bulb Requirements: The main light requires one 100W equivalent 3-way Type A medium base bulb (not included). The reading light requires one 60W equivalent Type A medium base bulb (not included). LED bulbs are compatible.
- Switch Operation: The lamp is operated by a rotary switch. Turn the switch clockwise to cycle through the lighting modes: main light on (low), main light on (medium), main light on (high), reading light on, both lights on, and off.
Image: The Elegant Designs LF2003-WHT Floor Lamp with both its main uplight and adjustable reading light illuminated, showcasing the light output.
Image: A detailed view of the flexible gooseneck arm and the smaller marble glass shade of the reading light, highlighting its adjustability.
Product Overview Video
Video: An official product overview from Elegant Designs (All The Rages) showcasing the LF2003-WHT floor lamp, its features, and design.
Maintenance
- Cleaning: To clean the lamp, ensure it is unplugged. Wipe the metal surfaces with a soft, dry cloth. The glass shades can be cleaned with a damp cloth and mild glass cleaner, then dried thoroughly.
- Bulb Replacement: Always unplug the lamp before replacing bulbs. Allow old bulbs to cool completely before removal. Screw in new bulbs firmly but do not overtighten.
Troubleshooting
- Lamp not turning on: Ensure the power cord is securely plugged into a working outlet. Check if the light bulbs are correctly installed and not burnt out. Verify the rotary switch is turned to an 'on' position.
- Flickering light: This may indicate a loose bulb or an incompatible bulb type. Try tightening the bulb or replacing it with a new one of the correct wattage and type.
- Lamp wobbles: Ensure all pole sections are tightly screwed together and the lamp is placed on a flat, stable surface. The base is designed to be sturdy, but uneven flooring can affect stability.
Specifications
| Model Name | Elegant Designs 2 Light Mother Daughter Floor Lamp with White Marble Glass |
| Model Number | LF2003-WHT |
| Brand | Elegant Designs |
| Finish Type | White |
| Product Dimensions | 13.25"D x 18"W x 71"H |
| Item Weight | 1.6 ounces |
| Base Material | Marble |
| Shade Material | Glass |
| Bulb Base | E26 |
| Number of Light Sources | 2 |
| Switch Type | Rotary |
| Power Source | Corded Electric |
Image: A technical diagram illustrating the key dimensions of the Elegant Designs LF2003-WHT Floor Lamp, including height, width, and shade measurements.
Warranty Information
This Elegant Designs product comes with a 1-year limited warranty. Please retain your proof of purchase for any warranty claims.
Support
For further assistance, questions, or to report any issues with your Elegant Designs LF2003-WHT Floor Lamp, please refer to the contact information provided with your purchase or visit the official Elegant Designs website.
About Elegant Designs Video
Video: A brand video from Elegant Designs (All The Rages) providing an overview of the company and its product philosophy.
