1. Introduction
Thank you for choosing the Urban Ladder Bocado Engineered Wood 3-Door Wardrobe. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image 1.1: The Urban Ladder Bocado 3-Door Wardrobe, showcasing its dark walnut finish and three doors with handles and locks.
2. Safety Information
- Always assemble the wardrobe on a soft, clean surface to prevent scratches.
- Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
- Do not allow children to climb on or play with the wardrobe.
- Distribute weight evenly inside the wardrobe to prevent tipping.
- For safety, it is recommended to secure the wardrobe to a wall using appropriate anti-tip hardware (not included, but recommended for stability).
- Keep small parts and assembly hardware out of reach of children.
3. Package Contents
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x Urban Ladder Bocado 3-Door Wardrobe (disassembled components)
- Assembly Hardware (screws, dowels, cam locks, hinges, handles, drawer slides, keys)
- Instruction Manual
4. Setup and Assembly
This product requires assembly. It is recommended that two adults perform the assembly. Please follow the steps below carefully.
4.1 Tools Required (Not Included)
- Phillips Head Screwdriver
- Hammer (for dowels)
- Measuring Tape (optional, for placement)
4.2 Assembly Steps
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface. Identify each part using the provided hardware list.
- Assemble Base: Connect the base panels using the specified hardware. Ensure the base is stable and level.
- Attach Side Panels: Secure the side panels to the base. Pay attention to the orientation of pre-drilled holes for shelves and back panel.
- Install Internal Dividers and Shelves: Insert the fixed internal dividers and shelves. The wardrobe features multiple compartments for organized storage.
- Assemble Drawer: Construct the drawer box and install the drawer slides onto both the drawer and the wardrobe frame.
- Attach Back Panel: Carefully align and attach the back panel to the wardrobe frame. This adds rigidity to the structure.
- Install Doors: Attach hinges to the doors and then mount the doors to the wardrobe frame. Adjust hinges as needed for proper alignment and smooth operation.
- Attach Handles and Locks: Securely fasten the door handles and install the locking mechanisms for the doors and drawer.
- Final Check: Ensure all screws and fasteners are tight. Test the operation of doors and drawers.
Image 4.1: The wardrobe with its three doors open, showing the hanging rod, multiple shelves, and the bottom drawer. This view helps in understanding the internal structure during assembly.
5. Operating Instructions
5.1 Doors
Gently pull the handles to open the doors. Push firmly to close. Avoid slamming the doors to prevent damage to hinges and the wardrobe structure.
5.2 Drawers
Pull the drawer handle to open. Push the drawer completely closed until it sits flush with the wardrobe frame. Do not overload the drawer.
5.3 Lockable Features
The wardrobe includes lockable doors and a lockable drawer. Insert the key into the lock and turn to secure or unlock the compartment. Ensure the key is removed after locking to prevent loss or damage.
Image 5.1: An interior view highlighting the lockable drawer and the key mechanism, demonstrating the secure storage option.
6. Maintenance and Care
- Cleaning: Wipe the wardrobe surfaces with a dry, soft cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the engineered wood finish.
- Spills: Immediately wipe any spills with a dry cloth to prevent staining or damage to the wood.
- Sunlight: Avoid placing the wardrobe in direct sunlight for prolonged periods, as this can cause fading or discoloration.
- Humidity: Maintain a stable humidity level in the room to prevent warping or cracking of the engineered wood.
- Hardware Check: Periodically check all screws, bolts, and fittings to ensure they are tight. Re-tighten if necessary.
7. Troubleshooting
- Doors do not align: Check hinge adjustments. Most hinges allow for minor adjustments to align doors horizontally, vertically, and in depth.
- Drawer sticks or does not slide smoothly: Ensure drawer slides are correctly installed and lubricated. Check for any obstructions in the drawer runners.
- Wardrobe feels wobbly: Verify that all assembly hardware is securely tightened. Ensure the wardrobe is on a level surface. Consider using wall anchor kits for added stability.
- Lock mechanism is stiff: Apply a small amount of graphite lubricant to the key and insert it into the lock, turning gently. Do not force the key.
8. Specifications
Image 8.1: Technical diagram illustrating the precise dimensions of the wardrobe, including width, depth, and height, as well as internal compartment measurements.
Image 8.2: A visual representation of the wardrobe's dimensions in relation to an average human height (5'7"), providing a practical sense of its scale.
| Feature | Detail |
|---|---|
| Brand | Urban Ladder |
| Model Name | Bocado |
| Model Number | FNSGCB41DW30024 |
| Color | Dark Walnut |
| Primary Material | Engineered Wood (MDF, Particle Board) |
| Product Dimensions (D x W x H) | 119.9D x 55.9W x 183.9H Centimeters (47.2 x 22 x 72.4 inches) |
| Item Weight | 72.5 Kilograms |
| Number of Doors | 3 |
| Number of Drawers | 1 |
| Special Feature | Lockable doors and drawer |
| Mounting Type | Floor Mount (Freestanding) |
| Assembly Required | Yes |
| Product Care Instructions | Wipe with Dry Cloth |
9. Warranty Information
The Urban Ladder Bocado Engineered Wood 3-Door Wardrobe comes with a 1-year replacement warranty against manufacturing defects. This warranty covers defects in materials and workmanship under normal use and service. It does not cover damage resulting from improper assembly, misuse, abuse, accidents, or normal wear and tear.
To claim warranty service, please retain your proof of purchase and contact Urban Ladder customer support.
10. Customer Support
For any questions, assistance with assembly, or to report missing/damaged parts, please contact Urban Ladder customer support. Refer to your purchase documentation or the Urban Ladder official website for contact details.
When contacting support, please have your model number (FNSGCB41DW30024) and proof of purchase readily available.