Introduction
This manual provides comprehensive instructions for the Passion-Electro A-Sharp-2287 replacement remote control, designed for use with Sharp LC-40LE810E televisions. This remote control offers functionality similar to the original unit without requiring any programming.
Product Features
- Direct replacement: Functions out of the box with compatible Sharp TV models.
- No programming required: Ready for immediate use upon battery installation.
- Infrared connectivity: Standard remote control technology for reliable operation.
- Optimal range: Effective operation up to 10 meters.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or press the latch and lift to open.
- Insert two (2) 1.5V AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover by sliding it back into place until it clicks securely.

Image: Bottom view of the remote control, highlighting the battery compartment cover.

Image: Close-up of the battery compartment, illustrating the correct orientation for AAA battery insertion.
Note: Batteries are not included with the remote control. Please use new AAA alkaline batteries for optimal performance.
Operating Instructions
Once batteries are installed, the remote control is ready to operate your Sharp LC-40LE810E TV. Point the remote control directly at the TV's infrared receiver.
Basic Functions
- Power Button: Press to turn the TV on or off.
- Number Buttons (0-9): Use to directly select channels.
- Channel Up/Down (CH+/-): Navigate through channels sequentially.
- Volume Up/Down (VOL+/-): Adjust the audio volume.
- Mute Button: Temporarily silence the TV audio.
- Input/Source Button: Cycle through available input sources (HDMI, AV, etc.).
- Menu Button: Access the TV's on-screen menu.
- Navigation Buttons (Up, Down, Left, Right, OK): Used to navigate and select options within the TV menu.

Image: Angled view of the remote control's upper section, displaying common function buttons including power, navigation, and colored function keys.

Image: Angled view of the remote control's lower section, featuring number buttons, mute, and other auxiliary controls.

Image: Full top-down angled view of the remote control, providing a complete overview of all buttons and layout.
Maintenance
Battery Replacement
Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.
Cleaning
To clean the remote control, wipe it with a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or chemical solvents, as these can damage the surface or internal components.
Storage
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
Troubleshooting
- Remote control not working:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new 1.5V AAA batteries.
- Ensure there are no obstructions between the remote control and the TV's infrared receiver.
- Confirm the remote control is pointed directly at the TV.
- Limited range:
- Ensure batteries are fresh.
- Reduce the distance between the remote and the TV.
- Remove any potential sources of infrared interference.
- Specific buttons not responding:
- This remote is designed for Sharp LC-40LE810E. Verify your TV model.
- Ensure the remote is clean and free of debris that might obstruct button presses.
Specifications
| Feature | Detail |
|---|---|
| Model Number | A-Sharp-2287 |
| Brand | Passion-Electro |
| Compatible Devices | Sharp LC-40LE810E Television |
| Connectivity Technology | Infrared |
| Maximum Range | 10 Meters |
| Battery Type | 2 x 1.5V AAA (not included) |
| Special Feature | No programming required |
Warranty and Support
For information regarding warranty coverage or technical support, please refer to the retailer or the official Passion-Electro website. Keep your purchase receipt as proof of purchase.