Introduction
This instruction manual provides detailed guidance for the installation, operation, and maintenance of your DINGLILIGHTING 48W Dimmable LED Flush Mount Ceiling Light, Model WS-FPC3-48C. Please read this manual thoroughly before installation and retain it for future reference. This fixture offers adjustable brightness and color temperature (3000K-6000K) via a wireless remote control, designed for various indoor environments such as bedrooms, living rooms, dining rooms, and kitchens.
Image: The DINGLILIGHTING 48W Dimmable LED Flush Mount Ceiling Light installed in a modern room setting.
Safety Information
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, and personal injury.
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- Ensure the electrical wiring is in accordance with all local and national electrical codes.
- This fixture is designed for indoor use only. Do not expose to water or moisture.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
- The fixture is FCC compliant, ensuring safety and performance.
- Only use the provided remote control for dimming and color adjustments. This fixture is not compatible with standard wall dimmers.
Package Contents
Verify that all components are present before beginning installation:
- LED Fixture Flush Mount Ceiling Light (1 unit)
- Safe LED driver (pre-installed)
- Wireless remote controller (batteries not included, requires 2*AAA)
- Connection port
- Wire nuts (3 pieces)
- Screws for anchor (2 pieces)
- Screws for junction box (2 pieces)
- Anchors (2 pieces)
- Instruction Manual (this document)
Image: Visual representation of the package contents and the hard-wired installation process.
Setup and Installation
Professional installation is recommended. Ensure power is disconnected before proceeding.
- Prepare for Installation: Turn off power at the circuit breaker. Ensure the mounting surface is clean and dry.
- Remove Hanging Plate: Gently remove the hanging plate from the lamp body by rotating it counter-clockwise.
- Wire Connections: Connect the white cable from the fixture to the "N" (neutral line) wire from the ceiling. Connect the black cable from the fixture to the "L" (live line) wire from the ceiling. Secure connections with wire nuts.
- Attach Base to Junction Box: Secure the fixture's base to the ceiling junction box using the provided screws. Ensure it is firmly attached.
- Install Lamp Body: Align the lamp body with the attached base and push, then rotate clockwise to secure it onto the base.
- Restore Power: Once installation is complete and secure, restore power at the circuit breaker.
Image: Detailed views of the internal 2835 LED chips, the high-frequency LED driver, and the acrylic lampshade, highlighting key components.
Operating Instructions
The DINGLILIGHTING LED Flush Mount Ceiling Light is operated using the included wireless remote control. Ensure 2*AAA batteries are installed in the remote.
Brightness and Color Temperature Adjustment:
- Brightness: The light offers 5% to 100% dimmable brightness. Use the "Brightness +" and "Brightness -" buttons on the remote to adjust.
- Color Temperature: Choose between 3000K (Warm White), 4000K (Natural White), and 6000K (Cool White). Use the "White" and "Warm" buttons to cycle through color temperatures.
- Memory Function: If the light remains on for more than 10 seconds, it will remember the last brightness and color temperature setting upon next activation.
Special Modes:
- Night Light Mode: Press the "Night Light" button on the remote. The light will adjust to 3000K warm white at 5% brightness. This mode can also be set with a 5-minute or 30-minute off-delay timer.
- Daylight Mode: Press the "Daylight" button for a bright, neutral white light setting.
- Warm Light Mode: Press the "Warm Light" button for a softer, warmer illumination.
Image: Visual guide illustrating the adjustable color temperature (3000K-6000K) and brightness range (5%-100%) of the ceiling light.
Image: Illustration of the night light function, showing its low brightness and timer options for a gentle ambiance.
Remote Control Functions
The remote control provides full command over your ceiling light. Familiarize yourself with its buttons:
Image: Detailed layout of the remote control, with each button's function clearly indicated.
- ON/OFF: Powers the light on or off.
- Night Light: Activates the lowest brightness setting (5% at 3000K).
- Brightness + / -: Increases or decreases light brightness.
- FULL BRIGHT: Sets the light to maximum brightness.
- White / Warm: Adjusts the color temperature between 3000K, 4000K, and 6000K.
- Daylight Mode: Sets the light to a bright, neutral white.
- Warm Light Mode: Sets the light to a soft, warm illumination.
- TIMING (5 min / 30 min): Sets a timer for the light to automatically turn off after 5 or 30 minutes.
- Cancel: Cancels any active timer.
- Matching: Used to pair the remote control with the light fixture if needed (refer to troubleshooting for pairing instructions).
Maintenance
To ensure the longevity and optimal performance of your DINGLILIGHTING LED Flush Mount Ceiling Light, follow these maintenance guidelines:
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- Bulb Replacement: This fixture uses integrated LED chips and does not require bulb replacement. If the LEDs fail, the entire fixture may need servicing or replacement.
- Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
If you encounter issues with your ceiling light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose wiring, faulty remote. | Check circuit breaker. Ensure wiring connections are secure. Replace remote batteries. Try pairing the remote again. |
| Remote control not working. | Dead batteries, remote not paired, obstruction. | Replace AAA batteries in the remote. Ensure no obstructions between remote and light. Re-pair the remote: Turn off the light at the wall switch for 5 seconds, then turn it on. Within 5 seconds, press and hold the "Matching" button on the remote until the light flashes. |
| Light flickers or dims unexpectedly. | Incompatible dimmer, unstable power supply, loose connection. | Ensure no external wall dimmer is used; this fixture only dims with its remote. Check power supply stability. Verify all wiring connections are tight. |
| Color temperature or brightness cannot be adjusted. | Remote issue, light not responding. | Ensure remote batteries are fresh. Re-pair the remote with the light fixture. |
Specifications
| Feature | Detail |
|---|---|
| Brand | DINGLILIGHTING |
| Model Number | WS-FPC3-48C |
| Wattage | 48 watts |
| Brightness | 3840 Lumens |
| Voltage | 120 Volts |
| Color Temperature | 3000K-6000K (Warm White, Natural White, Cool White) |
| Dimmability | 5% to 100% (via remote control only) |
| Material | Metal, Plastic (Acrylic lampshade) |
| Product Dimensions | 20"L x 20"W x 2"H |
| Item Weight | 4.09 pounds |
| Control Method | Remote Control |
| Installation Type | Flush Mount, Hardwired |
| CRI | 90+ |
| Recommended Room Size | 225-246 sq.ft |
Image: Illustration of the CRI 90+ rating, demonstrating more vivid and natural color rendering, along with the flicker-free and eye protection features.
Warranty
The DINGLILIGHTING 48W Dimmable LED Flush Mount Ceiling Light (Model: WS-FPC3-48C) comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact DINGLILIGHTING customer service. Refer to the product packaging or the retailer's website for the most current contact information.
We value your experience and are committed to providing support for our products.
