Introduction
Thank you for choosing the BESTOPE PRO Trifold LED Vanity Mirror. This manual provides essential information for the safe and effective use of your new mirror. Please read these instructions carefully before operation and retain them for future reference.
Image: The BESTOPE PRO Trifold LED Vanity Mirror in its open, illuminated state.
Key Features
- Illuminated Reflection: Features 21 bright, soft LED lights to provide optimal illumination for makeup application.
- Multi-Magnification Panels: Includes 2X and 3X magnification panels on the side for detailed tasks such as blemish control or precise eyeliner application.
- Adjustable Brightness: The LED lights are controlled by a touch-sensitive switch, allowing for dimming and brightening to suit various lighting conditions.
- 180° Rotational Design: The mirror can be rotated 180 degrees, offering flexible viewing angles for comprehensive makeup application.
- Portable Trifold Design: Designed to fold compactly, making it suitable for travel and easy storage.
- Dual Power Supply: Can be powered via the included USB cable or 4x AAA batteries (not included) for versatile use.
Package Contents
- BESTOPE PRO Trifold LED Vanity Mirror
- Detachable Base
- USB Cable
Setup
Assembly
- Carefully remove all components from the packaging.
- Align the mirror stand with the slot on the detachable base.
- Press firmly until the mirror is securely attached to the base.
Image: The detachable base and mirror stand, highlighting the assembly point.
Power Supply Options
Your mirror can be powered in two ways:
- USB Power: Connect the provided USB cable to the micro-USB port on the mirror and plug the other end into a USB power source (e.g., wall adapter, computer, power bank).
- Battery Power: Open the battery compartment on the back of the mirror and insert 4x AAA batteries (not included), ensuring correct polarity.
Image: Rear view of the mirror showing the battery compartment and USB data cable interface.
Video: This video demonstrates the key features of the BESTOPE PRO Trifold LED Vanity Mirror, including its 21 LED lights, 2X and 3X magnification panels, touch sensor brightness control, 180-degree rotation, and dual power supply options (USB and AAA batteries). It also shows the mirror in use for makeup application.
Operating Instructions
Using the LED Lights
- Open the trifold mirror panels.
- Locate the circular touch sensor button at the bottom center of the main mirror panel.
- Tap the touch sensor once to turn the LED lights on.
- To adjust brightness, press and hold the touch sensor. The lights will gradually dim or brighten. Release when the desired brightness is achieved.
- Tap the touch sensor again to turn the LED lights off.
Image: Close-up of the touch sensor power button on the mirror's surface.
Using Magnification Panels
The left side panel of the mirror features integrated 2X and 3X magnification sections for detailed viewing. Position your face appropriately to utilize these magnified areas for precision tasks.
Image: The mirror displaying the 2X and 3X magnification panels on the left side.
Adjusting Viewing Angle
The mirror features a 180-degree adjustable tilt bracket on the back, allowing you to set the mirror to your preferred viewing angle. Gently tilt the mirror forward or backward to achieve the desired position.
Image: The adjustable tilt bracket on the rear of the mirror, demonstrating its range of motion.
Maintenance
- Cleaning: To clean the mirror surface, gently wipe with a soft, lint-free cloth. Avoid abrasive cleaners or harsh chemicals that may damage the mirror or LED lights.
- Storage: When not in use, fold the side panels inward to protect the mirror surfaces and LED lights. Store in a cool, dry place.
- Battery Replacement: If using batteries, replace all four AAA batteries simultaneously when the lights begin to dim or fail to turn on.
Troubleshooting
- Lights not turning on: Ensure the mirror is properly connected to a power source (USB cable or fresh AAA batteries). Tap the touch sensor firmly.
- Lights are dim: If using batteries, they may need to be replaced. If using USB, ensure the power source is adequate. Adjust brightness using the touch sensor.
- Mirror unstable: Ensure the mirror stand is fully and securely inserted into the detachable base.
Specifications
| Feature | Specification |
|---|---|
| Brand | BESTOPE PRO |
| Model (ASIN) | B07GGP9X78 |
| Magnification | 2X, 3X |
| LED Lights | 21 pieces, adjustable brightness |
| Rotation | 180° adjustable tilt |
| Power Supply | USB cable (included) or 4x AAA batteries (not included) |
| Dimensions (L x W) | 8.26"L x 3.58"W (folded) |
| Item Weight | 2 Pounds |
| Material | Glass, Metal |
Important Safety Information
- Do not leave the mirror plugged in or with batteries inserted when not in use for extended periods.
- Handle the mirror with care, as it contains glass and may have sharp edges.
- Ensure the trifold design is properly assembled to maintain stability and prevent tipping.
- Keep out of reach of children.
- Avoid exposing the mirror to direct sunlight or extreme temperatures.
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact BESTOPE PRO customer service directly. Contact details can typically be found on the manufacturer's website or through your retailer.
