Milagrow AguaBot Spaze Premium Wet & Dry Robotic Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the Milagrow AguaBot Spaze Premium Robotic Vacuum Cleaner. This advanced wet and dry robotic cleaner is designed to provide efficient and thorough cleaning for your home. Featuring a programmable wet cleaning system, a large water tank, and a spacious dustbin, it offers versatile cleaning capabilities for various floor types. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device.

2. Important Safety Instructions

Please read all safety instructions carefully before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• This appliance is for indoor household use only. Do not use outdoors or on commercial or industrial surfaces.
• Do not allow children to operate the robot. Supervise children and pets when the robot is operating.
• Ensure the power adapter and charging station are not damaged. Do not use if damaged.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Do not pick up large objects, sharp objects, liquids, or burning/smoking materials.
• Always remove the water tank and dustbin before cleaning or performing maintenance.
• Use only the manufacturer-specified power adapter and accessories.
• Store the robot in a dry, cool place when not in use.

3. Package Contents

Verify that all components are present in the package:

• Milagrow AguaBot Spaze Premium Robotic Vacuum Cleaner (Main Unit)
• Charging Station
• Power Adapter
• Virtual Wall
• Remote Control
• Main Dustbin (1 Litre capacity)
• Water Tank (650 ml capacity)
• Microfiber Mop (2 units)
• HEPA Filter (2 units)
• Side Brushes
• Cleaning Brush
• User Manual

Image 3.1: Overview of the Milagrow AguaBot Spaze Premium robotic vacuum cleaner and its included accessories. This image displays the main robot unit, water tank, main dustbin, mop mount, smart mop, extra smart mop, HEPA filters, cleaning brush, suction inlet, charging station, adapter, virtual wall, remote, side brushes, and extra side brushes. Note that some accessories are specific to wet or premium versions.

4. Product Components

4.1. Main Unit Features

• Programmable Wet Cleaning System: Controls water speed and stops water flow when the robot is stationary or water level is low.
• Large Water Tank: 650 ml capacity, suitable for wet cleaning over 3000 sq ft.
• Large Dustbin: 1-liter capacity, reducing the frequency of emptying.
• 3D UV Germicidal Lamp: Kills germs on the floor, in the air, and within the dustbin.
• HEPA Filter: Removes 99.97% of particulate matter above 0.3 microns.
• Anti-Slip Tyres: Wide 28mm tyres for improved traction.

Image 4.1: Illustration of the programmable wet cleaning system, showing robot movement sensors, water speed control sensors, and water level sensors. The system ensures water flow stops when the robot is stationary or water runs out.

Image 4.2: Detailed view of the 1-liter dustbin, highlighting the large HEPA filter that captures 99.97% of particulate matter and the washable double-layered primary filter module.

Image 4.3: Diagram illustrating the internal engineering with powerful 1200 Pa suction, triple filter system, 3D UV system, and wide tyres. Also shown are the unbreakable Silk Nylon PA 66 long-lasting brush compared to an ordinary brush.

Image 4.4: Visual representation of the patented 3D Ultra Violet Bulb, demonstrating its germ-killing action on the floor, in the air, and within the dustbin.

5. Setup Guide

5.1. Unpacking and Placement

1. Carefully remove all components from the packaging.
2. Choose a suitable location for the charging station. Ensure it is against a wall, with at least 1 meter of clear space on either side and 2 meters in front, free from obstacles.
3. Plug the power adapter into the charging station and then into a wall outlet. Ensure the indicator light on the charging station illuminates.

5.2. Initial Charging

1. Place the robot onto the charging station, ensuring the charging contacts on the robot align with those on the station.
2. Allow the robot to charge completely before its first use. This typically takes several hours. The indicator light on the robot will change to indicate a full charge.

5.3. Preparing the Cleaning Area

• Remove any loose cables, small objects, or fragile items from the floor.
• For wet cleaning, ensure the water tank is filled and the microfiber mop is attached.
• For dry cleaning, ensure the dustbin is empty and properly installed.

6. Operating Instructions

6.1. Starting and Stopping Cleaning

• Press the 'Clean' button on the robot or the remote control to start cleaning.
• Press the 'Clean' button again to pause cleaning.
• To send the robot back to the charging station, press the 'Home' button on the remote.

6.2. Cleaning Modes

The AguaBot Spaze Premium offers 6 AI Cleaning Modes:

• Auto Mode: The robot intelligently navigates and cleans the entire area.
• Spiral Mode: Cleans in an expanding spiral pattern, ideal for concentrated dirt.
• Wall-to-Wall Mode: Cleans along edges and corners.
• XXL Mode: Designed for larger areas, ensuring comprehensive coverage.
• Turbo Mode: Increases suction power for deeper cleaning.
• Spot Cleaning: Focuses on a specific dirty area.

Image 6.1: Visual representation of the AI Auto Cleaning modes, including XXL, Turbo, Spiral, Random, and Wall to Wall patterns, demonstrating the robot's versatile cleaning capabilities.

6.3. Using the Virtual Wall

The 2-way virtual wall creates an invisible barrier to block the robot from entering unwanted areas.

1. Place the virtual wall device on the floor where you want to create a barrier.
2. The virtual wall can block the robot on two sides simultaneously at 90 degrees, or be set for unidirectional operation.
3. Ensure the virtual wall has working batteries.

Image 6.2: Illustration of the two-way virtual wall creating an invisible barrier to prevent the robot from entering specific areas, demonstrating its ability to block entry on two sides at a 90-degree angle.

6.4. Wet Cleaning (Mopping)

1. Fill the water tank with clean water. Do not use cleaning solutions that may clog the system.
2. Attach the microfiber mop pad securely to the water tank.
3. Insert the filled water tank into the robot.
4. Start the cleaning cycle. The robot will automatically dispense water and mop the floor.
5. The programmable system will stop water flow if the robot stops moving or the water tank is empty.

7. Maintenance and Care

Regular maintenance ensures optimal performance and extends the lifespan of your robot.

7.1. Emptying the Dustbin

• Press the dustbin release button and pull out the dustbin.
• Open the dustbin lid and empty its contents into a trash bin.
• Clean the dustbin with a dry cloth or brush. The primary filter module is washable.

7.2. Cleaning Filters

• Remove the HEPA filter from the dustbin. Tap it gently to remove dust. Do not wash the HEPA filter.
• The primary filter can be rinsed under running water. Ensure it is completely dry before re-installing.
• Replace HEPA filters every 3-6 months, depending on usage.

7.3. Cleaning Brushes

• Remove the main brush and side brushes.
• Use the provided cleaning tool to remove hair and debris tangled around the brushes.
• Re-install the brushes, ensuring they click into place.

7.4. Cleaning the Water Tank and Mop Pad

• After wet cleaning, empty any remaining water from the tank.
• Rinse the water tank with clean water and allow it to air dry.
• Remove the microfiber mop pad and wash it by hand or machine. Allow it to air dry completely before reuse.

8. Troubleshooting

If your robot encounters an issue, refer to the following table for common problems and solutions.

9. Technical Specifications

Image 9.1: Close-up of the 28mm wide anti-slip tyres and an illustration depicting the robot's ability to clean up to 3500 sq. ft. on a single charge, showcasing its efficient navigation through a floor plan.

10. Warranty and Customer Support

10.1. Manufacturer Warranty

All Milagrow products undergo inspection before dispatch. If a product is received dead on arrival, a refund or replacement will be provided if reported within 3 days of receipt. The product must be unused and returned in its original packaging. Once the product is used and registered, the warranty becomes effective from the date of receipt.

• Main Unit (Floor Vacuuming Robots): 1 year warranty.
• Battery: 6 months warranty.
• Accessories: 6 months warranty for manufacturing defects.

Damages caused by human error or incorrect usage are not covered under warranty. Returns are generally not accepted unless the product is dead on arrival, the delivery was not accepted by the buyer, or the product was purchased after a pre-sales demonstration. Milagrow is committed to providing after-sales service and replacements when necessary.

10.2. Customer Support

For any queries, technical assistance, or warranty claims, please contact Milagrow customer support:

• Phone: +91-124-4309570, +91-9910009920, +91-9953476189