1. Introduction
This manual provides detailed instructions for the installation and operation of your MPC Complete Remote Start System, designed specifically for Toyota Land Cruiser models manufactured between 2003 and 2010. This system enhances vehicle convenience by allowing remote engine start and other functions. Please read these instructions thoroughly before attempting installation or operation.
2. Vehicle Compatibility
This remote start system is compatible with the following vehicle specifications:
- Vehicle: Toyota Land Cruiser
- Model Years: 2003-2010
- Transmission: Automatic Transmission ONLY
- Ignition Type: Conventional Key-Start Ignition ONLY (Not compatible with Push-To-Start vehicles)
- Engine Type: Gas Engine Only (NOT for Hybrid vehicles)
Figure 2.1: Vehicle Requirements. This system is designed for conventional key-start ignitions and gas engines only. It is not compatible with push-to-start or hybrid vehicles.
3. Package Contents
The complete remote start system package includes the following components:
- Remote Starter Module
- Immobilizer Bypass Module
- (2) 5-button 1-way Remote Transmitters
- All necessary wiring harnesses for installation
- Firmware preloaded for your specific vehicle
Figure 3.1: Included 5-button 1-way remote transmitters for controlling the remote start system.
4. Features
The MPC Remote Start System offers the following functionalities:
- Remote Engine Start: Start your vehicle's engine from up to 2000 feet away.
- Remote Lock/Unlock: Lock and unlock your vehicle's doors remotely.
- Trunk/Hatch Release: Remotely pop your trunk or back hatch.
- Multi-Vehicle Control: The included remotes support controlling two vehicles.
- Programmable Auto-Start: Set the system to automatically start the engine every 2, 3, or 4 hours.
- Programmable Run Time: Configure the engine run time for 5, 10, 20, or 30 minutes.
5. Installation
5.1. Installation Knowledge Requirement
This product requires basic installation knowledge. It is not a plug-and-play system and involves standard wiring connections. The data module temporarily overrides the vehicle's immobilizer system only during remote start. Concise directions with wire colors and locations are provided. Installation by novice users is not recommended.
Figure 5.1: Installation Difficulty. This system requires advanced installation skills and is not recommended for beginners.
5.2. General Installation Steps
While detailed, vehicle-specific instructions are provided with the kit, the general installation process involves:
- Preparation: Gather all necessary tools. Disconnect the vehicle's battery.
- Accessing Wiring: Remove necessary trim panels to access the vehicle's ignition and other wiring harnesses. A trim removal tool may be helpful.
- Module Connection: Connect the remote start module and immobilizer bypass module according to the provided wiring diagram. Ensure all connections are secure.
- Testing: Reconnect the battery and perform initial tests as outlined in the specific instructions.
- Securing Components: Securely mount all modules and tidy up wiring before reassembling trim panels.
Figure 5.2: Visual representation of the step-by-step installation process, emphasizing clear instructions and pre-programmed modules.
Figure 5.3: A trim removal tool, which may be useful during the installation process to prevent damage to interior panels.
6. Operation
Operating your MPC Remote Start System is straightforward using the provided 5-button remote transmitters.
6.1. Remote Engine Start
To start your vehicle remotely, press the Start button on your remote transmitter. The vehicle will start and run for the pre-programmed duration (5, 10, 20, or 30 minutes). To turn off the engine remotely, press the Start button again.
6.2. Remote Lock/Unlock
Press the Lock button to lock your vehicle's doors. Press the Unlock button to unlock your vehicle's doors.
6.3. Trunk/Hatch Release
Press and hold the Trunk button (or equivalent icon) on your remote transmitter to release the vehicle's trunk or rear hatch.
6.4. Multi-Vehicle Control
If you have multiple MPC remote start systems installed in different vehicles, the multi-vehicle button on your remote allows you to switch between controlling them. Refer to the specific remote instructions for pairing and switching procedures.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | B-1487-444 |
| Item Weight | 3 pounds |
| Product Dimensions | 8 x 8 x 3 inches |
| Remote Range | Up to 2000 feet |
| Remote Type | (2) 5-button 1-way remotes |
| Vehicle Compatibility | Toyota Land Cruiser (2003-2010), Automatic Transmission, Key-Start, Gas Engine |
8. Warranty Information
This product is covered by a 1-year limited warranty through either MyPushcart or the product's manufacturer. The warranty applies to properly installed products under normal use and protects against defects in workmanship and materials for one year from the original purchase date.
8.1. Exclusions
The warranty does not cover abuse, misuse, improper operation, or damage due to environmental exposure. MyPushcart is not responsible for installation charges, labor costs, or any incidental loss or damage related to warranty service.
8.2. Warranty Service
If a defect is deemed under warranty, MyPushcart may choose to repair or replace the product at no cost to the original purchaser.
9. Technical Support
For technical assistance, MPC provides support based in Tucson, AZ, United States. Several methods of support are available, and QR code instructions are included with the product to ensure access to the most up-to-date information.
- Availability: Monday - Friday, 9 AM - 5 PM (MST)
- Support Type: Expert troubleshooting, quick response time, USA-based experts.
Figure 9.1: MPC offers free expert technical support for assistance with installation or operation.