Namesake Abigail and Winston Toddler Bed Conversion Kit

Introduction

This manual provides detailed instructions for the assembly, use, and maintenance of your Namesake Abigail and Winston Toddler Bed Conversion Kit in Vintage Gold. This kit is designed to convert your existing Abigail 3-in-1 Crib into a toddler bed, providing a safe and comfortable sleeping environment for your growing child.

The conversion rail is constructed from durable iron with classic metal casting at the joints, ensuring stability and longevity. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: Namesake Abigail and Winston Toddler Bed Conversion Kit in Vintage Gold.

Important Safety Information

WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death.

• Always ensure all bolts and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not use this conversion kit if any parts are missing, damaged, or broken. Contact NAMESAKE for replacement parts. Do not substitute parts.
• Ensure the toddler bed is placed on a level surface.
• Keep small parts and plastic bags away from children during assembly.
• This product is intended for use by toddlers who can get in and out of the bed unassisted.
• The mattress used with this conversion kit must be the standard crib mattress that came with your Abigail 3-in-1 Crib.

Package Contents

Please verify that all components are present before beginning assembly:

• 1 x Namesake Abigail and Winston Toddler Rail (Vintage Gold)
• 1 x Hardware Pack (bolts, washers, Allen wrench)

Specifications

Image: The toddler bed conversion rail with approximate dimensions.

Setup Instructions

Before You Begin

• Ensure you have the compatible Namesake Abigail 3-in-1 Crib. This conversion kit is specifically designed for this model.
• Clear a spacious area for assembly.
• Gather all parts and hardware from the package contents list.
• You may need the original assembly instructions for your Abigail 3-in-1 Crib for guidance on removing the front rail.

Assembly Steps

1. Prepare the Crib: Carefully remove the front rail of your Namesake Abigail 3-in-1 Crib. This typically involves unscrewing bolts that connect the front rail to the side panels. Refer to your crib's original assembly manual for precise instructions on disassembling the front rail.
2. Position the Toddler Rail: Align the ends of the Namesake Abigail and Winston Toddler Rail with the pre-drilled holes on the side panels of your crib where the front rail was previously attached. The open section of the toddler rail should face outwards, allowing your child easy access.
3. Secure the Rail: Using the provided hardware (bolts and washers), attach the toddler rail to the crib's side panels. Insert the bolts through the holes and tighten them securely with the Allen wrench. Do not overtighten.
4. Check Stability: Once the toddler rail is attached, gently shake the bed to ensure all connections are firm and stable. There should be no wobbling or loose parts.
5. Mattress Height Adjustment (Optional): Your Abigail 3-in-1 Crib features multiple mattress height settings. For a toddler bed, it is generally recommended to use the lowest mattress setting to minimize the risk of falls. Adjust the mattress support to the desired height if it is not already at the lowest position.

Operating Your Toddler Bed

Once converted, the Namesake Abigail and Winston Toddler Bed provides a safe and accessible sleeping space for your child. The open side allows for independent entry and exit, fostering a sense of autonomy while the remaining rails provide a secure boundary.

Ensure the mattress is always properly fitted within the bed frame and that there are no gaps larger than 1 inch (2.5 cm) between the mattress and the bed frame.

Care and Maintenance

• Cleaning: Wipe the metal surfaces with a damp cloth. Avoid using abrasive cleaners or strong chemicals, as these can damage the finish.
• Inspections: Periodically inspect the bed for any signs of wear, damage, or loose hardware. Re-tighten any loose bolts immediately.
• Storage: If disassembling for storage, keep all hardware in a secure bag to prevent loss. Store in a dry, temperate environment.

Troubleshooting

Warranty and Support

NAMESAKE products are manufactured with quality and safety in mind. For information regarding product warranty, replacement parts, or any other support inquiries, please visit the official NAMESAKE website or contact their customer service department.

Please have your model number (M15599VG) and purchase information ready when contacting support.

Manufacturer: DaVinci - DROPSHIP

UPC: 048517826768

For further assistance, please refer to the contact information provided on the product packaging or the official NAMESAKE website.