Kulannder 5D Diamond Painting LED Magnifier Lamp Instruction Manual

1. Product Overview

The Kulannder 5D Diamond Painting LED Magnifier Lamp is designed to assist with detailed tasks such as diamond painting, cross-stitch, needlework, reading, and small repairs. It features a main lens with 4X magnification and a smaller inset lens with 6X magnification, complemented by three integrated LED lights for enhanced illumination. The flexible gooseneck and strong clip allow for versatile positioning and secure attachment to various surfaces.

Image 1.1: Kulannder LED Magnifier Lamp, illustrating its flexible design and clip for attachment.

2. Package Contents

• 1 x LED Light Magnifier with Clip
• 1 x Lens Cleaning Cloth

3. Product Specifications

4. Setup Instructions

Follow these steps to set up your Kulannder LED Magnifier Lamp:

1. Unpack Components: Carefully remove the magnifying glass head and the gooseneck with the attached clamp from the packaging.
2. Connect Head to Gooseneck: Securely connect the magnifying glass head to the top of the gooseneck. Ensure it clicks into place or is firmly screwed on, depending on the model.
3. Install Batteries: Locate the battery compartment on the magnifying glass head. Open it and insert three (3) AAA batteries (not included), ensuring correct polarity. Close the compartment securely.
4. Attach to Surface: Use the strong clamp to attach the lamp to a stable surface such as a desk, table, or workbench. Ensure the clamp is firmly secured to prevent accidental dislodgement.

Image 4.1: Visual guide for connecting the magnifier head, installing batteries, and clamping the unit to a surface.

5. Operating Instructions

Operating your LED Magnifier Lamp is straightforward:

1. Power On/Off: Locate the ON/OFF switch on the side of the magnifying glass head. Slide the switch to the "ON" position to turn on the LED lights. Slide it to "OFF" to turn them off.
2. Adjust Position: The flexible gooseneck allows for 360-degree adjustment. Bend and position the gooseneck to direct the magnifier and light precisely over your work area. The gooseneck is designed to hold its position without collapsing.
3. Utilize Magnification: Use the large 4X lens for general magnification. For finer details, utilize the smaller 6X inset lens.

Image 5.1: The flexible gooseneck allows for precise positioning of the magnifier and light.

Image 5.2: The magnifier features both 4X and 6X lenses for varying levels of detail.

6. Maintenance

To ensure the longevity and optimal performance of your magnifier lamp:

• Cleaning the Lens: Use the provided lens cleaning cloth to gently wipe the magnifier lenses. Avoid using abrasive materials or harsh chemical cleaners, as these can scratch or damage the acrylic lens.
• Battery Replacement: When the LED lights dim or stop working, replace all three AAA batteries with new ones. Ensure correct polarity during installation.
• Storage: When not in use, store the lamp in a clean, dry place away from direct sunlight and extreme temperatures.

Image 6.1: Use the included lens cloth for gentle cleaning of the magnifier lens.

7. Troubleshooting

• Lights Not Turning On:
  • Check if the ON/OFF switch is in the "ON" position.
  • Ensure batteries are installed correctly with the right polarity.
  • Replace old batteries with new ones.
• Lights Flickering:
  • This often indicates low battery power. Replace the batteries.
  • Ensure battery compartment connections are clean and secure.
• Magnifier Not Holding Position:
  • Ensure the clamp is securely fastened to a stable surface.
  • Adjust the gooseneck carefully to find a stable position.

8. Warranty and Support

The Kulannder LED Magnifier Lamp comes with a one-year warranty. If you encounter any quality issues or require assistance, please contact Kulannder customer support. Refer to the product packaging or the retailer's website for specific contact information.