Product Overview
This document provides instructions for the La Reveuse 18oz (550 ml) replacement cup with spout lid. This cup is designed for use with La Reveuse 300W personal blenders from the LARB1801 and LARB1802 series. It is made from food-grade, BPA-free material, ensuring safe use for your beverages.
The design allows for dual-use: blend your shake or smoothie directly in the cup, then attach the sports lid for convenient on-the-go consumption. Its portable nature makes it suitable for the office, gym, class, car, or bag.
Image: The 18oz BPA-free replacement cup, shown with orange juice, emphasizing its capacity and material safety.
Compatibility
This replacement cup is specifically designed to fit La Reveuse 300W personal blenders from the LARB1801/LARB1802 series ONLY. Compatible models include:
- LARB1801S
- LARB1801B
- LARB1801N
- LARB1802S
- LARB1802P
- LARB1802U
- LARB1802S2
- LARB1802P2
- LARB1802R2
- LARB1802G2
Important: This cup is not universally compatible with all blenders. Please verify your blender model number before use.
Image: A visual representation of various La Reveuse blender models that are compatible with this replacement cup.
Features
- Capacity: 18 oz / 550 ml
- Material: Food-grade, BPA-free plastic
- Dimensions: Approximately 3 inches diameter x 9 inches height (cup size)
- Lid: Includes a spout lid for easy portability and drinking.
- Design: Portable and lightweight, suitable for travel and daily use.
Image: Detailed dimensions of the replacement cup, including height and diameter.
Image: The replacement cup highlighting its BPA-free certification.
Setup and Installation
- Prepare Ingredients: Add your desired ingredients into the 18oz replacement cup. Ensure ingredients do not exceed the "MAX" fill line.
- Attach Blade Assembly (Not Included): Securely screw the blade assembly (from your La Reveuse blender, not included with this cup) onto the open end of the replacement cup. Ensure it is tightened properly to prevent leaks.
- Place on Blender Base: Invert the assembled cup and blade, then place it onto the motor base of your compatible La Reveuse LARB1801 or LARB1802 series blender.
- Secure and Blend: Twist the cup clockwise onto the motor base until it locks into place. Operate your blender according to its specific instructions.
- Remove and Attach Spout Lid: After blending, remove the cup from the motor base. Unscrew the blade assembly and replace it with the provided spout lid. Ensure the spout lid is securely fastened.
Image: The replacement cup shown with its detachable spout lid, ready for assembly.
Operation
Once the replacement cup is filled with ingredients and securely attached to your compatible La Reveuse blender base, operate the blender as you normally would. Refer to your specific blender model's instruction manual for detailed blending procedures and safety guidelines.
After blending, the spout lid transforms the blending cup into a portable travel bottle, allowing you to enjoy your smoothie or shake on the go.
Care and Maintenance
- Hand Wash Only: The replacement cup is NOT dishwasher safe. Washing in a dishwasher, especially with hot cycles, can cause the plastic to warp or melt.
- Avoid Hot Liquids: Do not add hot liquids to the cup. This can damage the material and potentially cause leaks or injury.
- Cleaning: Wash the cup and lid with warm, soapy water immediately after each use. Use a soft brush or sponge to clean thoroughly. Rinse well and allow to air dry completely before storing.
- Storage: Store the cup and lid in a clean, dry place.
Failure to follow these care instructions may result in damage to the product and void any applicable warranty.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cup leaks during blending. | Blade assembly not tightened correctly. | Ensure the blade assembly is securely screwed onto the cup before placing it on the blender base. |
| Cup does not fit on blender base. | Incompatible blender model. | Verify your blender is a La Reveuse LARB1801 or LARB1802 series model. This cup is not universal. |
| Cup appears warped or damaged. | Washed in dishwasher or exposed to hot liquids. | Always hand wash the cup with warm, soapy water. Never use hot liquids or place in a dishwasher. |
Specifications
| Feature | Detail |
|---|---|
| Brand | La Reveuse |
| Model Name | Replacement cup for La Reveuse blender LARB1801/1802 series |
| Model Number | 1801/1802 CUP |
| Capacity | 18 oz / 550 ml |
| Material | Plastic (BPA-free) |
| Color | Clear |
| Item Dimensions (W x H) | 3.07"W x 9.25"H |
| Product Care Instructions | Hand Wash Only |
| Included Components | 1PC 18 oz BPA Free Portable Sports Cup with Travel Lid |
Warranty and Support
This La Reveuse replacement cup comes with a 1-year limited warranty from the manufacturer. For warranty claims or technical support, please contact La Reveuse customer service directly. Keep your purchase receipt as proof of purchase.
For more information or to contact support, please visit the official La Reveuse website or refer to the original blender manual.