HiLook THC-B110-M
HiLook THC-B110-M CCTV Security Camera User Manual
Model: THC-B110-M | Brand: HiLook
Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your HiLook THC-B110-M CCTV Security Camera. Designed for both indoor and outdoor surveillance, this 720p HD bullet camera offers reliable performance with its robust metal construction and IP66 weather protection. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.
Figure 1: HiLook THC-B110-M CCTV Security Camera. This image displays the white bullet-style camera, highlighting its main lens and the integrated mounting bracket.
Setup
1. Package Contents
- HiLook THC-B110-M Camera
- Mounting Screws and Wall Plugs
- Drill Template
- Quick Start Guide
2. Site Selection
Choose a location that provides the desired viewing angle and is within reach of power and video cables. Ensure the mounting surface is strong enough to support the camera's weight (400g). For outdoor installations, consider locations that offer some protection from direct harsh weather, although the camera is IP66 rated.
3. Mounting the Camera
- Place the drill template on the desired mounting surface and mark the screw holes.
- Drill pilot holes according to the marks. Insert wall plugs if mounting on masonry or drywall.
- Align the camera's mounting base with the drilled holes and secure it using the provided screws.
- Adjust the camera's angle and orientation using the adjustable bracket. Tighten all screws to fix the position.
4. Wiring and Power Connection
The THC-B110-M is a wired camera. Connect the video output (BNC connector) to your Digital Video Recorder (DVR) or monitoring system. Connect a 12 VDC / 4 Watt power supply to the camera's power input. Ensure the power supply meets the specified requirements to prevent damage or malfunction.
Operating Instructions
1. Initial Power-Up
Once the camera is securely mounted and wired, connect the power supply. The camera will power on automatically. Allow a few moments for the camera to initialize.
2. Viewing Live Feed
Access the live video feed through your connected DVR or monitoring software. Refer to your DVR's manual for specific instructions on viewing camera channels.
3. Night Vision
The camera automatically switches to night vision mode in low-light conditions, providing clear black and white images up to 20 meters. Ensure no obstructions are blocking the infrared illuminators for optimal night vision performance.
4. Recording and Playback
Recording and playback functions are managed by your DVR system. Configure recording schedules, motion detection, and other settings via your DVR's interface. Consult your DVR's user manual for detailed instructions on these features.
Maintenance
1. Cleaning
Regularly clean the camera lens and housing to ensure clear image quality. Use a soft, damp cloth for the housing. For the lens, use a lens cleaning solution and a microfiber cloth to avoid scratches. Do not use harsh chemicals or abrasive materials.
2. Cable Inspection
Periodically inspect all cables for signs of wear, damage, or corrosion, especially for outdoor installations. Replace damaged cables immediately to maintain reliable operation.
3. Firmware Updates
Check the HiLook official website for any available firmware updates for your camera model. Firmware updates can improve performance, add new features, or fix bugs. Follow the instructions provided with the firmware update carefully.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No video signal | No power; Loose video cable; Incorrect DVR input. | Check power supply and connections; Ensure video cable is securely connected; Verify DVR input channel. |
| Poor image quality | Dirty lens; Insufficient lighting; Cable interference. | Clean the lens; Ensure adequate lighting or check night vision; Check cable quality and routing. |
| Night vision not working | IR illuminators blocked; Insufficient power. | Clear any obstructions from the camera's view; Verify power supply is stable. |
Technical Specifications
- Model: THC-B110-M
- Image Sensor: 720p HD
- Resolution: 1280 x 720 Pixels
- Lens: 2.8 mm fixed lens
- Viewing Angle: 92 degrees (horizontal)
- Night Vision Range: Up to 20 meters
- Frame Rate: 30 frames per second
- Connectivity: Wired (BNC)
- Power Supply: 12 VDC / 4 Watts (Power adapter not included)
- Operating Temperature: -40°C to 60°C (-40°F to 140°F)
- Ingress Protection: IP66 (Dust tight and protected against powerful water jets)
- Material: Metal
- Dimensions (L x W x H): 18 x 8 x 8 cm (7.09 x 3.15 x 3.15 inches)
- Weight: 400 g (0.88 lbs)
Warranty Information
HiLook products typically come with a limited manufacturer's warranty. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the warranty card included with your product or visit the official HiLook website.
Support
For technical assistance, product inquiries, or service requests, please contact HiLook customer support. You can find contact information, FAQs, and additional resources on the official HiLook website:
When contacting support, please have your product model number (THC-B110-M) and serial number ready.
Related documentsTHC-B110-M
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.