MPC Complete 1-Button Remote Start Kit User Manual for Honda Accord 2003-2007

1. Introduction and Product Overview

1.1 Product Compatibility

This remote start kit is designed for specific vehicle configurations. Please verify your vehicle meets the following requirements:

Vehicle Model: Honda Accord 2003-2007
Transmission Type: Automatic Transmission ONLY
Ignition Type: Key-Start Ignition ONLY (Does NOT work in Push-To-Start Vehicles)
Engine Type: Gas Engine Only (NOT for Hybrid vehicles)

Image showing vehicle requirements: a green checkmark over a key-start ignition and a red X over a push-to-start button. Text confirms 'KEY-START IGNITION ONLY' and 'Gas Engine Only (NOT for Hybrid)'.

Figure 1.1: Vehicle Ignition Type Compatibility. This kit is exclusively for key-start ignition systems and gas engines.

Image with a large 'STOP' sign between a push-to-start button and a key-start ignition, with text 'ENSURE YOU HAVE THE CORRECT KIT!!!'.

Figure 1.2: Important compatibility check. Confirm your vehicle uses a conventional key-start ignition.

1.2 What's Included

The MPC Complete 1-Button Remote Start Kit includes all necessary components for installation and operation:

Remote starter module
Immobilizer bypass module
(2) Ultra-compact 1-button remotes
Firmware preloaded for your specific vehicle
All required wiring harnesses and connectors

Image showing the complete MPC remote start kit components, including the main module, wiring harnesses, and two 1-button remote controls.

Figure 1.3: Contents of the MPC Complete 1-Button Remote Start Kit.

2. Setup and Installation

2.1 Installation Requirements

Installation of this remote start kit requires basic knowledge of automotive electronics and wiring. While the included data module simplifies many connections, some direct wiring connections are necessary. This is not a plug-and-play system.

Recommended tools for installation include:

Wire stripper/crimper
Butt connectors (marine heat shrink type recommended for durability)
Electrical tape or heat shrink tubing
Multimeter for testing circuits
Trim removal tools to prevent damage to vehicle interior panels

Image of an 'Ease of Installation' gauge, indicating a moderate difficulty level.

Figure 2.1: Installation difficulty level. Basic wiring knowledge is required.

Image of an orange plastic trim removal tool.

Figure 2.2: A trim removal tool, useful for safely disassembling interior panels during installation.

2.2 Wiring Connections

The kit includes concise directions with specific wire colors and locations for your Honda Accord 2003-2007. Follow these instructions carefully. Many wires in the harness may not be used for your specific vehicle; focus only on the connections specified in the provided guide.

3. Operating Instructions

3.1 Remote Control Features

The system includes two ultra-compact 1-button remotes with an operating range of up to 1500 feet. Key features include:

Remote Engine Start: Start your vehicle's engine from a distance.
Optional Unlock Feature: Allows unlocking the vehicle once the engine is running, useful if the OEM remote becomes inactive.
Programmable Auto-Start: Options for 2, 3, or 4 hourly automatic starts.
Programmable Run Time: Options for 5, 10, 20, or 30-minute engine run times.

Image of two 1-button remote controls for the remote start system.

Figure 3.1: The two included 1-button remote controls.

3.2 Using the Remote Start

To activate the remote start function, press and hold the single button on the remote control for approximately 3 seconds. The vehicle's parking lights will flash, and the engine will start. To turn off the engine remotely, press and hold the button again for 3 seconds.

4. Maintenance

The MPC remote start system is designed for reliable operation with minimal maintenance. To ensure longevity:

Keep remote controls dry and away from extreme temperatures.
Replace remote control batteries as needed (typically when range decreases).
Avoid exposing the main module to moisture or excessive vibration.
Periodically check wiring connections for security, especially after significant vehicle maintenance.

5. Troubleshooting

If you encounter issues with your remote start system, consider the following common troubleshooting steps:

System Not Responding: Check remote control battery. Ensure you are within the operating range.
Engine Fails to Start: Verify all vehicle doors, hood, and trunk are closed. Ensure the vehicle's battery is charged. Confirm the vehicle is in Park (automatic transmission).
Reduced Range: Replace remote control battery. Ensure no major obstructions between the remote and the vehicle.
Intermittent Operation: Check all wiring connections for looseness or corrosion.

For persistent issues, refer to the technical support section for assistance.

6. Product Specifications

Specification	Detail
Item Weight	3 pounds
Product Dimensions	8 x 6 x 4 inches
Item Model Number	B-3385-250-1
Remote Range	Up to 1500 feet
Included Remotes	(2) 1-Button Remotes

7. Warranty Information

MPC remote starters and alarms carry a limited lifetime warranty through the manufacturer. Physical damage or damage resulting from improper installation will void the manufacturer's warranty.

First Year: Contact MPC for warranty issues. The product must be returned at the customer's expense for warranty service.
After First Year: Warranty issues must be handled directly through the manufacturer. A receipt from the original purchase will be required.

The product is warranted to the original purchaser, when properly installed and under normal conditions of use, to be free from defects in workmanship and materials for a period of one year from the date of purchase. This warranty does not cover abuse, operation inconsistent with the product's design, or damage from environmental exposure. If a defect is deemed

Related Documents - B-3385-250-1

	PRL Motorsports Throwback Strut Bar Installation Guide for 2018+ Honda Accord Detailed installation guide for the PRL Motorsports "Throwback" Strut Bar (Model PRL-HA10-STRUT) for the 2018 and newer Honda Accord 1.5T and 2.0T models. Includes required tools, component list, installation steps, and maintenance recommendations.
	Aerpro SWPS3C Steering Wheel Control Retention for Porsche Vehicles User Manual User manual for the Aerpro SWPS3C, a device designed to retain factory steering wheel controls when installing an aftermarket stereo in Porsche Cayenne (9PA) vehicles (2002-2007). Includes installation process, connection diagrams, dipswitch configuration, and software update information.
	B&W HDRH25217N Heavy Duty Receiver Hitch Installation Guide for Chevy/GMC Trucks Detailed installation instructions for the B&W HDRH25217N Heavy Duty Receiver Hitch. Learn how to properly install this receiver hitch on 1999-2013 Chevy/GMC 1/2 and 3/4 Ton light duty trucks.
	BX-TY1 Digital Amplifier Interface Installation Guide for Lexus/Toyota (2001-2015) \| Axxess Detailed installation instructions for the Axxess BX-TY1 digital amplifier interface, designed for Lexus and Toyota vehicles from 2001-2015. Includes features, compatibility, wiring diagrams, and setup procedures.
	B&W Trailer Hitches Model 2600 Custom 5th Wheel Hitch Mounting Rail Installation Instructions Detailed installation instructions for the B&W Trailer Hitches Model 2600 Custom 5th Wheel Hitch Mounting Rail, designed for 2003-2012 Dodge Ram 3/4 & 1 Ton trucks. Includes parts list, preparation, and step-by-step assembly guidance.
	HPS Performance Strut Tower Bar Installation Instructions for Honda Accord (2018-2022) Detailed installation guide for the HPS Performance Strut Tower Bar (Part Number: 42-104) for 2018-2022 Honda Accord 1.5L and 2.0L Turbo models. Includes bill of materials, step-by-step instructions, and important safety warnings.