Winsome Burke Printer Stand Table (Model 23121) Instruction Manual

Introduction

This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your Winsome Burke Printer Stand Table, Model 23121. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: The Winsome Burke Printer Stand Table in Coffee finish, showcasing its compact design with a top surface, a drawer, and two open shelves.

Safety Information

Adhere to the following safety guidelines during assembly and use:

• Ensure all parts are present and undamaged before assembly.
• Assemble on a soft, clean surface to prevent scratches.
• Do not overtighten screws, as this may damage the wood.
• Keep small parts away from children during assembly.
• Place the assembled stand on a level surface to prevent tipping.
• Do not exceed the maximum weight recommendation of 50 pounds for the top surface.

Setup and Assembly

This section outlines the general steps for assembling your Winsome Burke Printer Stand. A detailed parts list and specific assembly diagrams are typically included with your product packaging. Refer to those for precise component identification and step-by-step instructions.

Dimensions Overview

Image: Technical diagram showing the dimensions of the Winsome Burke Printer Stand Table. The stand measures approximately 22.5 inches deep, 19.84 inches wide, and 34.5 inches high (50.4cm x 50.4cm x 79cm). The adjustable shelf has a depth of 12 3/4 inches (32.4cm).

General Assembly Steps (Refer to packaged instructions for details)

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Verify all parts against the included parts list.
2. Assemble Frame: Attach the side panels to the top and bottom frames using the provided hardware (e.g., screws, dowels, cam locks). Ensure all connections are secure.
3. Install Shelves: Insert the adjustable middle shelf into the desired position. The shelf height can be customized using the pre-drilled holes and shelf pins.
4. Assemble Drawer: Construct the drawer box according to the instructions, then install the drawer slides onto the stand and the drawer. Insert the assembled drawer into the stand.
5. Final Checks: Ensure all screws are tightened and the stand is stable.

Operating Instructions

The Winsome Burke Printer Stand Table is designed for functional use in a home office environment.

• Top Surface: The top surface is suitable for holding a printer, laptop, or other office equipment. Ensure the weight does not exceed 50 pounds.
• Drawer: The integrated drawer provides enclosed storage for small office accessories such as pens, paper clips, or labels.
• Adjustable Shelves: The two open shelves offer additional storage. The middle shelf can be adjusted to accommodate items of varying heights.

Image: The Winsome Burke Printer Stand Table with a printer placed on its top surface, demonstrating its primary function.

Image: A close-up view of the Winsome Burke Printer Stand Table with its drawer partially open, illustrating the storage capacity for small items.

Maintenance

To maintain the appearance and longevity of your Winsome Burke Printer Stand Table:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
• Spills: Immediately wipe up any spills to prevent staining or water damage.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
• Hardware: Periodically check and tighten all assembly hardware to ensure stability.

Troubleshooting

If you encounter issues with your printer stand, consider the following common solutions:

• Instability/Wobbling:
  • Ensure the stand is placed on a level surface.
  • Check all screws and bolts to confirm they are securely tightened.
  • Verify that all legs are making even contact with the floor.
• Drawer Not Sliding Smoothly:
  • Check for any obstructions in the drawer slides.
  • Ensure the drawer slides are properly aligned and securely attached.
  • Lightly lubricate the drawer slides with a silicone-based lubricant if necessary.
• Missing Parts:
  • Thoroughly check all packaging materials.
  • Contact Winsome customer support for assistance with replacement parts.

Specifications

Warranty and Support

Manufacturer Warranty: Replacement parts are available for up to 60 days from the date of purchase.

For further assistance, please refer to the contact information provided with your product packaging or visit the official Winsome website.

You can also visit the Winsome Store on Amazon for more information.