Stanley 08-2566B Cartridge Filter User Manual

1. Introduction

This manual provides essential information for the proper use, installation, and maintenance of your Stanley 08-2566B Cartridge Filter. This high-efficiency filter is designed for both wet and dry pick-up applications, effectively capturing various types of debris including cement dust and drywall dust.

The unique pleated design of this filter offers an increased surface area, which enhances airflow and minimizes clogging, contributing to improved air quality during vacuum operation.

Image: The Stanley 08-2566B Cartridge Filter, designed for efficient wet and dry vacuuming.

2. Compatibility

The Stanley 08-2566B Cartridge Filter is universally designed to fit most 5-18 gallon wet/dry vacuum cleaners. It is specifically compatible with the following STANLEY models:

• SL18115
• SL18115P
• SL18116
• SL18116P
• SL18191P
• SL18199P
• SL18117
• SL18701P-10A
• SL18410P-5A
• SL18410-5B
• PCX18406-5B

Ensure your vacuum cleaner model is listed above or falls within the 5-18 gallon wet/dry capacity range for optimal performance.

3. Installation

Installing the Stanley 08-2566B Cartridge Filter is a simple process that can be completed in seconds. Follow these steps for proper installation:

1. Preparation: Ensure your wet/dry vacuum cleaner is unplugged from the power source before beginning installation.
2. Remove Old Filter: Carefully remove the existing filter from your vacuum cleaner. Refer to your vacuum's specific user manual for instructions on accessing the filter compartment.
3. Install New Filter: Align the new Stanley 08-2566B cartridge filter with the filter housing. Gently push the new filter into place until it is securely seated. Ensure a snug fit to prevent air leaks.
4. Secure: Reassemble any parts of the vacuum cleaner that were removed to access the filter compartment, such as the lid or retaining cap.

Once installed, the filter is ready for use in both wet and dry vacuuming applications.

4. Operating Principles

The Stanley 08-2566B Cartridge Filter is engineered for powerful filtration, providing superior performance compared to traditional sleeves and bags. Its unique pleated design significantly increases the surface area available for filtration, which directly contributes to improved airflow and a reduced risk of clogging.

This design ensures that fine dust particles and debris are effectively captured, leading to cleaner exhaust air and a more efficient vacuuming experience. The filter is designed to maintain consistent suction power by preventing particulate matter from reaching the motor.

5. Maintenance

To ensure the longevity and optimal performance of your Stanley 08-2566B Cartridge Filter, regular cleaning is essential. This filter is designed to be washable and reusable, significantly reducing replacement costs.

Cleaning Instructions:

1. Removal: Unplug the vacuum cleaner and carefully remove the filter as described in the installation section.
2. Rinsing: Gently rinse the filter with clean water. For best results, use a low-pressure water source to avoid damaging the pleats. Ensure all trapped debris is washed away.
3. Drying: Allow the filter to air dry completely before reinstalling it. This is crucial, especially for dry pick-up applications, as moisture can damage the vacuum motor or reduce filtration efficiency. Do not use heat to dry the filter.
4. Reinstallation: Once completely dry, reinstall the filter following the installation steps.

Regular cleaning, ideally after every few uses or when suction power noticeably decreases, will maintain the filter's efficiency and extend its lifespan.

Image: Visual guide demonstrating the process of washing the filter and installing a dust collection bag.

6. Troubleshooting

Most issues related to the filter's performance can be resolved by ensuring proper installation and regular maintenance. If you experience reduced suction or other performance issues, consider the following:

• Reduced Suction: This is often an indication that the filter is clogged. Remove and clean the filter as per the maintenance instructions. Ensure it is completely dry before reinstallation.
• Improper Fit: If the filter is not seated correctly, air may bypass it, leading to poor filtration and reduced suction. Reinstall the filter, ensuring it is snug and secure.
• Damage: Inspect the filter for any tears, holes, or significant damage to the pleats. A damaged filter will not perform effectively and should be replaced.

If problems persist after following these steps, refer to your vacuum cleaner's main user manual or contact STANLEY customer support.

7. Specifications

8. Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the official STANLEY website or the documentation included with your original vacuum cleaner purchase. You may also contact STANLEY customer service directly for assistance.

STANLEY Customer Service: Please visit the official STANLEY website for contact details and support resources.