1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Daytech Caregiver Pager System. This system is designed to provide reliable assistance for individuals requiring monitoring, offering peace of mind for both users and caregivers.
Figure 1: Applications of the Caregiver Pager System. The system is beneficial for elderly care, patient care, disabled care, and bedridden care, providing a simple way to call for assistance.
2. Product Components
The Daytech Caregiver Pager System typically includes the following components:
- Plug-in Receiver(s): These units plug into a standard electrical outlet and emit an alert sound when a call button is pressed.
- Wireless Call Button(s): These portable buttons are used by the individual needing assistance to send an alert to the receiver(s).
- Lanyard: For wearing the call button around the neck.
- Mounting Accessories: Such as double-sided adhesive tape for fixed installation of the call button.
Figure 2: System components. A plug-in receiver and a wireless call button are shown, illustrating the primary parts of the system.
3. Setup Instructions
- Install Call Button Battery:
Each call button requires one 12V Alkaline battery (included). Use the provided tool (if applicable) to open the back cover, insert the battery with correct polarity, and close the cover securely.
- Plug in Receiver:
Plug each receiver into a standard electrical outlet in a central location or where the caregiver is most likely to hear the alert.
- Pairing (if necessary):
The units are typically pre-paired. If re-pairing is needed, press and hold the volume button on the receiver until it blinks and chimes. Then, press the call button. The receiver will confirm successful pairing.
- Call Button Placement:
The call button can be worn around the neck using the lanyard or attached to a surface (e.g., bedside, bathroom wall) using the provided double-sided adhesive tape. Ensure it is within easy reach of the user.
Figure 3a: Attaching the lanyard.
Figure 3b: Mounting with adhesive tape.
Figure 3c: Versatile placement options. The call button can be worn or mounted, and is designed to be splash-proof.
4. Operating Instructions
To use the Daytech Caregiver Pager System:
- To Call for Help:
Press the large "CALL" button on the wireless call button. The button will illuminate briefly, indicating the signal has been sent.
- Receiving an Alert:
The plug-in receiver will sound an audible alert and its LED light will flash. This indicates that the user has pressed their call button and requires attention.
- Adjusting Receiver Settings:
The receiver features buttons on the side to adjust volume levels and change the alert tone. Refer to the "Features" section for more details.
5. Features
- Multiple Tones: Choose from 20 unique alert tones. The default ringtone is "Ding-Dong".
- Adjustable Volume: 5 adjustable volume levels, ranging from 0dB (mute mode) to 110dB.
- Alert LED Light: The receiver includes an LED light that flashes during an alert, providing a visual cue, especially useful in mute mode or for individuals with hearing impairment.
- Wireless Range: Operates effectively up to 300 feet (90 meters) in open areas, suitable for various home and facility layouts.
- Memory Function: The receiver retains your selected tone and volume settings even after being unplugged.
- Splash-Proof Call Button: The call button has an IP55 waterproof rating, making it suitable for use in bathrooms or near water, but it should not be immersed.
Figure 4: Receiver features. The receiver offers 20 tones, 5 volume levels (0-110dB), and an LED alert light for clear notification.
Figure 5: Wireless range capability. The system provides a stable wireless signal up to 500 feet (150 meters), ensuring reliable communication throughout a home or facility.
6. Maintenance
- Cleaning: Wipe the receiver and call button with a soft, dry cloth. Do not use abrasive cleaners or immerse the devices in water.
- Battery Replacement: When a call button's signal weakens or fails to transmit, replace its 12V Alkaline battery. Use the provided tool to open the back cover.
- Storage: Store the system in a cool, dry place when not in use for extended periods.
Figure 6: Call button specifications. The button is splash-proof (IP55), powered by a 12V battery, and operates within a wide temperature range.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Receiver does not sound an alert. |
|
|
| Alerts are too quiet or too loud. | Volume setting needs adjustment. | Adjust the volume using the buttons on the side of the receiver. |
| Receiver emits random alerts. | Possible interference or unit malfunction. | Unplug the receiver, reset it by holding the "forward" button for 5 seconds, and re-pair. If the issue persists, contact customer support. |
8. Specifications
- Model Number: 6543836991
- Brand: Daytech
- Control Method: Touch
- Noise Level: Up to 110 Decibels
- Wireless Range: 300+ feet (90m) in open area
- Call Button Battery: 1 x 12V Alkaline battery per call button (included)
- Receiver Power Source: AC Plug-in (260 Volts)
- Call Button Waterproof Rating: IP55 (splash-proof)
- Operating Temperature: -22°F to 158°F (-30°C to 70°C)
- Item Weight: 1.06 pounds (total package)
- Package Dimensions: 5.83 x 5.08 x 4.17 inches
9. Safety Information
- Do not immerse the call button in water, despite its splash-proof rating.
- Keep the receiver away from direct sunlight, heat sources, and moisture.
- Ensure the receiver is plugged into a properly functioning electrical outlet.
- Do not attempt to open or repair the devices yourself. Refer to qualified personnel for service.
- Keep batteries out of reach of children.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Daytech website. Please have your model number (6543836991) ready when contacting support.
