Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Meridian M70067NB 1-Light 60 Watt Natural Brass Pendant. Please read this manual thoroughly before beginning installation and retain it for future reference.
Important Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- This fixture is intended for indoor use only.
- Do not exceed the maximum wattage specified for the bulb.
- Handle glass components with care to prevent breakage.
- Keep flammable materials away from the light fixture.
Package Contents
Verify that all components are present before beginning installation:
- Pendant Fixture (Natural Brass finish, Clear Glass shade)
- Mounting Hardware (Canopy, Mounting Plate, Screws, Wire Nuts)
- Instruction Manual
Figure 1: Meridian M70067NB Pendant Light. This image displays the complete pendant light fixture, featuring a natural brass finish rod and canopy, with a clear glass globe shade enclosing the bulb socket.
Setup and Installation
Follow these steps to install your pendant light fixture:
- Turn Off Power: Locate the circuit breaker or fuse box that supplies power to the installation location and turn off the power.
- Prepare Mounting: Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure it is securely fastened.
- Wire Connections:
- Connect the fixture's black wire to the household's black (hot) wire.
- Connect the fixture's white wire to the household's white (neutral) wire.
- Connect the fixture's ground wire (bare copper or green) to the household's ground wire and to the mounting plate's ground screw.
- Secure all connections with wire nuts and electrical tape.
- Mount Canopy: Carefully push the canopy up to the ceiling, aligning the mounting holes with the screws on the mounting plate. Secure the canopy with the decorative nuts or screws provided.
- Install Glass Shade: Carefully attach the clear glass shade to the fixture body. Ensure it is seated properly and secured according to the fixture design (e.g., by threading a ring or using retention clips).
- Install Bulb: Screw in one incandescent bulb (not included) into the socket. Do not exceed 60 watts.
- Restore Power: Turn the power back on at the circuit breaker or fuse box.
Figure 2: Side view of the Meridian M70067NB Pendant Light. This image highlights the elongated rod and the spherical clear glass shade, providing a different perspective of the fixture's design.
Operating Instructions
Once installed and power is restored, the Meridian M70067NB Pendant Light operates via a standard wall switch (not included). There is no integrated switch on the fixture itself.
- To Turn On: Flip the wall switch connected to the fixture to the "ON" position.
- To Turn Off: Flip the wall switch connected to the fixture to the "OFF" position.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your pendant light.
- Cleaning:
- Always disconnect power before cleaning.
- Wipe the natural brass finish with a soft, dry cloth. Do not use abrasive cleaners or polishes, as they may damage the finish.
- Clean the glass shade with a soft, damp cloth and a mild glass cleaner. Dry thoroughly.
- Bulb Replacement:
- Turn off power at the circuit breaker before replacing the bulb.
- Allow the bulb to cool completely before touching it.
- Unscrew the old bulb and screw in a new incandescent bulb. Ensure the replacement bulb does not exceed 60 watts.
Figure 3: Close-up view of the clear glass shade and bulb socket of the Meridian M70067NB Pendant Light. This image provides a detailed look at the glass quality and the internal components.
Troubleshooting
If you encounter issues with your pendant light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Glass shade is loose. |
|
|
Specifications
| Model Number | M70067NB |
| Brand | Meridian |
| Finish | Natural Brass |
| Shade Material | Glass (Clear) |
| Number of Lights | 1 |
| Max Wattage | 60 Watts |
| Lamp Type | Incandescent |
| Power Source | Corded Electric |
| Mounting Type | Ceiling Mount |
| Product Dimensions | 8 x 8 x 8.75 inches |
| Item Weight | 8.1 Pounds |
| UPC | 842325103642 |
Warranty and Support
This Meridian M70067NB Pendant Light is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please contact the manufacturer, Savoy House, directly or refer to their official website.
Manufacturer: Savoy House
Please have your model number (M70067NB) and proof of purchase available when contacting support.
