REVLON Ceramic Coated 2" Flat Iron Instruction Manual

Important Safety Information

Please read all instructions before using this appliance. Keep away from water. As with most electrical appliances, electrical parts are electrically live even when the switch is off. To reduce the risk of death by electric shock: Always unplug this appliance immediately after using. Do not use while bathing. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. If an appliance falls into water, unplug it immediately. Do not reach into the water. This appliance is for household use only.

WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons: This appliance should never be left unattended when plugged in. Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to a service center for examination and repair. Keep the cord away from heated surfaces. Do not pull, twist, or wrap cord around the appliance. Never use while sleeping. Never drop or insert any object into any opening. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. Do not use an extension cord with this appliance. This appliance is hot when in use. Do not let eyes or bare skin touch heated surfaces. Do not place the heated unit directly on any surface while it is operating or cooling. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like. Do not direct hot air toward eyes or other heat-sensitive areas. Do not use on wet hair. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Setup

Before first use, ensure the flat iron is clean and free of any packaging materials. Unwind the power cord completely. This appliance is designed for use with standard household electrical outlets. Ensure your hands are dry before plugging in the unit.

Locking Mechanism

The REVLON Ceramic Coated Flat Iron features a convenient locking mechanism for compact storage. To unlock the plates for use, locate the lock button near the swivel cord. Press the button to release the plates. To lock the plates after use and cooling, press the handles together and engage the lock button. This keeps the plates closed for easy storage and travel.

The Revlon Ceramic Coated Flat Iron features a sleek black design with 2-inch ceramic coated plates, ideal for efficient hair straightening. The unit includes a swivel cord for tangle-free operation and a locking mechanism for compact storage.

Operating Instructions

Powering On and Temperature Control

Plug the flat iron into a suitable electrical outlet. Locate the ON/OFF switch and the temperature dial on the side of the unit. Slide the switch to the 'ON' position. The indicator light will illuminate, signaling that the flat iron is heating up. Use the temperature dial to select your desired heat setting. The flat iron heats up quickly, reaching optimal styling temperature in seconds.

This image highlights the user-friendly controls of the flat iron, including the adjustable temperature dial for precise heat selection, the simple ON/OFF switch, and the flexible swivel cord designed to prevent tangles during styling.

Hair Preparation

Ensure your hair is completely dry before using the flat iron. For best results and to protect your hair from heat damage, apply a heat protectant spray evenly throughout your hair. Detangle your hair thoroughly to ensure smooth gliding of the plates.

Straightening Technique

Divide your hair into small, manageable sections. For optimal results, sections should be no wider than the width of the flat iron plates (2 inches). Place a section of hair between the ceramic coated plates, close to the roots. Gently but firmly glide the flat iron down the hair section from root to tip in one smooth, continuous motion. Avoid holding the iron in one spot for too long to prevent heat damage. Repeat for all sections of hair until desired straightness is achieved.

The image illustrates the effectiveness of the 2-inch ceramic coated plates in achieving smooth and straight hair quickly. The wide plates allow for efficient styling of larger sections, reducing overall styling time.

Styling Tips for Different Hair Types

• Fine hair: Use lower heat settings (250-300°F) to prevent damage.
• Average hair: Medium heat settings (300-350°F) are generally suitable.
• Thick, curly hair: Higher heat settings (350-400°F) may be required for effective straightening.

Always start with a lower heat setting and increase as needed to minimize potential heat damage.

This visual demonstrates the versatility of the Revlon flat iron across various hair types, from fine to thick and curly, consistently delivering sleek, straight results.

Automatic Shut-Off

For added safety and peace of mind, the flat iron is equipped with an automatic shut-off feature. If left unattended for a prolonged period, the unit will automatically power down.

Maintenance

Cleaning

Always unplug the flat iron and allow it to cool completely before cleaning. Wipe the ceramic plates and the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals, as these can damage the ceramic coating. Ensure the unit is completely dry before storing or next use.

Storage

Store the cooled flat iron in a dry, safe place. Utilize the locking mechanism to keep the plates closed, protecting them from damage and making storage more compact. Do not wrap the power cord tightly around the appliance, as this can cause damage to the cord over time.

Troubleshooting

Flat Iron Not Heating Up

• Ensure the power cord is securely plugged into a working electrical outlet.
• Check if the ON/OFF switch is in the 'ON' position.
• Verify that the temperature dial is set to a heat level and not 'OFF'.

Hair Not Straightening Effectively

• Ensure hair is completely dry before styling.
• Use smaller sections of hair for better heat distribution and more effective straightening.
• Increase the temperature setting gradually if your hair type requires more heat.
• Ensure the plates are clean and free of product buildup, which can hinder performance.

Smoke or Burning Smell

• Immediately unplug the unit.
• A small amount of steam or smoke may be normal if hair is not completely dry or if product is applied. However, excessive smoke or a persistent burning smell indicates a problem.
• Do not continue to use the appliance if this occurs. Contact customer support.

Specifications

Official Product Videos

Warranty and Support

For warranty information or product support, please refer to the user manual included with your product or visit the official REVLON website. You may also contact Helen of Troy customer service for assistance.

User Manual (PDF): Download Here