Walker Edison Industrial Modern Metal and Wood Rectangular Side Table

Introduction

Thank you for choosing the Walker Edison Industrial Modern Metal and Wood Rectangular Side Table. This manual provides essential information for the safe and correct assembly, use, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

This side table is designed for residential indoor use, featuring a grey wash manufactured wood top and shelves, supported by a black powder-coated metal frame. It offers practical storage and a modern industrial aesthetic.

Safety Information

• Assembly Required: This product requires assembly. Please ensure all parts are present and undamaged before beginning.
• Weight Capacity: Do not exceed the maximum weight recommendation of 50 pounds (22.68 kg) on the tabletop or shelves.
• Indoor Use Only: This table is intended for indoor residential use. Do not use outdoors.
• Stable Placement: Place the table on a flat, stable surface to prevent tipping.
• Child Safety: Keep small parts and packaging materials away from children during assembly.

Package Contents

Before assembly, verify that all components listed below are included in your package:

• Hardware Package (screws, bolts, etc.)
• Tabletop
• Base/Frame Components
• Shelves (2)

Note: A screwdriver is recommended for assembly. All assembly tools are not included.

Setup and Assembly

Assembly of the Walker Edison Side Table typically requires two people. Follow these general steps for assembly:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
2. Identify Parts: Refer to the included diagram (if any) to identify each component.
3. Assemble Frame: Begin by assembling the metal frame components. Secure them using the provided hardware. Ensure all connections are snug but do not overtighten until the entire frame is assembled.
4. Attach Shelves: Once the frame is stable, attach the manufactured wood shelves. The table features two shelves: a large opening (7.75" H x 20" L x 15.75" W) and a small opening (4" H x 20" L x 15.75" W).
5. Final Tightening: Once all parts are in place, carefully tighten all screws and bolts. Do not overtighten to avoid damaging the materials.
6. Placement: Position the assembled table in your desired indoor location. Ensure it is stable and level.

Image: Components of the Walker Edison side table, including metal frame parts and wood shelves, ready for assembly.

Image: An assembled Walker Edison side table, showing its overall dimensions: 61 cm height, 50.8 cm width, and 40.6 cm depth.

Operating and Usage

This side table is designed to provide convenient storage and display space in your bedroom or living area.

• Storage: Utilize the two shelves for organizing books, magazines, remote controls, or other small items.
• Display: The tabletop can be used to hold lamps, decorative items, or beverages.
• Weight Distribution: Distribute weight evenly across the tabletop and shelves to maintain stability.

Image: The Walker Edison side table placed next to a sofa in a living room, showcasing its functional use with a lamp, books, and a plant.

Maintenance and Care

To ensure the longevity and appearance of your side table, follow these care instructions:

• Cleaning: Wipe the table surfaces with a dry cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Immediately wipe up any spills to prevent staining, as the table is not stain-resistant.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or warping of the wood finish.
• Heat: Do not place hot items directly on the surface. Use coasters or protective pads.
• Hardware: Periodically check and tighten all assembly hardware to ensure the table remains stable.

Troubleshooting

If you encounter any issues with your side table, consider the following:

• Wobbling: If the table wobbles, check that all screws and bolts are securely tightened. Ensure the table is placed on a level surface. The sled base design provides stability.
• Damaged Parts: If any part is damaged during shipping or assembly, do not proceed with assembly. Contact customer support for replacement parts.
• Missing Hardware: If any hardware is missing, do not attempt to substitute with incorrect parts. Contact customer support for a hardware package.

Specifications

Warranty and Support

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Walker Edison website. For customer support, missing parts, or assembly assistance, please contact Walker Edison customer service directly.

Note: Specific warranty terms and contact information may vary.