1. Product Overview
The Mount-It! No Stud TV Wall Mount (Model MI-376) offers a revolutionary way to hang your television without the need for drilling into wall studs. This innovative TV hanger is designed for most 40-80 inch televisions, supporting weights up to 110 lbs. Its unique design allows for easy installation directly onto drywall, functioning much like a picture frame hanger. The mount features universal VESA pattern compatibility, including 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, and 600x400. It boasts a low-profile tilting design, keeping your TV close to the wall (1.2 inches away) while offering -5 or 0 degree tilt options for optimal viewing angles. The spring-loaded locks ensure quick and secure TV attachment and detachment.
Figure 1.1: The Mount-It! No Stud TV Wall Mount, showing the main wall plate, TV brackets, and included spacers.
2. Safety Information
WARNING: Failure to read and follow all instructions may result in property damage, personal injury, or death. If you do not understand these instructions or have doubts about the safety of the installation, contact a qualified installer or Mount-It! customer support.
- Weight Capacity: Do not exceed the maximum weight capacity of 110 lbs (50 kg). This mount is designed for televisions between 40 and 80 inches. Exceeding the weight limit may result in instability causing possible injury.
- Wall Type: This mount is specifically designed for drywall installation. Do not install on plaster, concrete, brick, or other wall types without appropriate alternative hardware and professional consultation.
- Installation Tools: Use only the tools specified in the installation guide. Ensure all nails are fully hammered into the wall plate for secure attachment.
- Children: Keep children away from the installation area during setup. Do not allow children to play with the mount or attached television.
- Regular Inspection: Periodically check that the mount and TV are securely attached and that all fasteners are tight.
3. Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Mount-It! customer service for assistance.
Figure 3.1: All hardware included with the Mount-It! No Stud TV Wall Mount, including the wall mount, TV bracket, various screws, nails, and spacers.
Included Components:
- Wall Mount Plate
- TV Bracket (Horizontal Mounting Plate)
- Various Screws (M-A, M-B, M-C, M-D, M-F, M-G)
- Nails for Drywall Installation
- Spacers (2 different sizes for tilt adjustment)
- Wall Anchors and Fasteners (for alternative mounting, if needed)
- Spring-loaded release cord
4. Setup Instructions
Follow these steps carefully to install your Mount-It! No Stud TV Wall Mount. It is recommended to have a second person assist with hanging the TV.
4.1. Mount Wall Plate to Drywall
- Position the Wall Mount: Hold the wall mount plate against the desired location on your drywall. Ensure it is at the correct height for your TV.
- Nail in One End: While maintaining your hand on the center base of the mount, nail in one end of the wall mount plate. This will temporarily secure it.
- Level the Mount: Use a level (not included) to ensure the wall mount plate is perfectly horizontal. Adjust as needed.
- Secure Remaining Nails: Once leveled, hammer in the nail on the opposite end of the wall mount. Then, proceed to hammer in all remaining nails along the wall plate. Some nails may require more applied force to fully seat. Ensure all nails are flush with the mount.
Figure 4.1.1: A person positioning the wall mount plate on the drywall, preparing to secure it.
Figure 4.1.2: Close-up of a nail being hammered into the wall mount plate, securing it to the drywall. This mount requires no drilling into studs.
Figure 4.1.3: A person using a spirit level to ensure the wall mount is perfectly horizontal before fully securing it.
Figure 4.1.4: A person hammering the remaining nails into the wall mount plate to fully secure it to the drywall. The mount is now ready for the TV.
Note: This mount is designed for drywall installation and does not require drilling into studs. It hangs like a picture frame using multiple nails for secure support.
Figure 4.1.5: An illustration highlighting that no drilling or wall studs are required for the installation of this TV mount, emphasizing its ease of use.
4.2. Attach TV Bracket to Television
- Fasten VESA Bracket: Place your TV face down on a soft, clean surface. Attach the horizontal TV bracket to the back of your TV using the appropriate screws from the included hardware kit. This mount fits VESA spacing 100mm, 200mm, 300mm, 400mm, and 600mm.
- Select Desired Spacers (for Tilt): If you desire a tilt angle for your TV, attach the appropriate spacers to the lower VESA holes on your TV. The mount includes two sets of spacers: one for a 0-degree tilt (flush with the wall) and another for a -5-degree tilt.
Figure 4.2.1: A person fastening the VESA bracket to the back of a television using a screwdriver, ensuring it aligns with the TV's VESA mounting holes.
Figure 4.2.2: A person selecting and attaching the desired spacers to the lower VESA holes on the TV, which will determine the tilt angle of the mounted television.
4.3. Hang Television on Wall Mount
- Unlatch Spring Lock: Before hanging the TV, pull the cord hanging from the wall mount to unlatch the spring lock mechanism. This prepares the mount to receive the TV bracket.
- Hang the TV: With assistance, carefully lift the television and align the TV bracket with the wall mount. Gently lower the TV so the bracket hooks onto the wall mount.
- Secure the TV: Once the TV is properly seated on the mount, pull the cord again to re-latch the spring lock. This will securely hold the TV in place.
Figure 4.3.1: A person pulling the cord from the wall mount to unlatch the spring lock, which is necessary before hanging the television.
Figure 4.3.2: Two individuals carefully lifting and hanging the television onto the installed wall mount, ensuring the TV bracket engages correctly with the mount.
Figure 4.3.3: A person pulling the cord to re-engage the spring lock, securing the television firmly to the wall mount.
Installation Video Guide:
Video 4.3.4: Official installation guide for the Mount-It! No Stud TV Wall Mount. This video demonstrates the step-by-step process of mounting the unit and securing your television.
5. Operating Instructions
Once installed, the Mount-It! No Stud TV Wall Mount offers simple operation for viewing and maintenance.
5.1. Adjusting Tilt Angle
The tilt angle of your television is determined by the spacers used during installation. You can choose between a 0-degree tilt (TV flush with the wall) or a -5-degree tilt (TV angled slightly downwards). To change the tilt, you will need to unmount the TV, replace the spacers on the lower VESA holes, and then remount the TV.
Figure 5.1.1: Illustration showing the two available tilt settings (0° and -5°) and the corresponding spacers used to achieve them.
5.2. Quick Release Mechanism
The mount features a spring-loaded quick release mechanism. To temporarily unmount your TV (e.g., for cable access or moving), simply pull the hanging cord to unlatch the spring lock. This allows the TV to be lifted off the wall mount. To re-secure, place the TV back on the mount and pull the cord again to re-latch the spring lock.
Figure 5.2.1: Diagram illustrating the spring lock and quick release feature, which allows for easy and secure mounting or unmounting of the TV.
6. Maintenance
To ensure the longevity and safe operation of your Mount-It! No Stud TV Wall Mount, periodic maintenance is recommended:
- Check Fasteners: Every 6-12 months, visually inspect all nails and screws to ensure they remain tight and secure. If any appear loose, gently re-tighten them.
- Clean Surfaces: Use a soft, dry cloth to wipe down the mount and TV bracket to remove dust and debris. Avoid abrasive cleaners or solvents.
- Inspect for Damage: Check for any signs of wear, corrosion, or damage to the mount components. If any damage is observed, discontinue use and contact Mount-It! customer support.
7. Troubleshooting
If you encounter issues with your Mount-It! No Stud TV Wall Mount, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level after installation. | Wall mount was not perfectly level during installation. | Carefully unmount the TV. Re-check the wall mount with a level and adjust by gently tapping the mount until level. Re-secure all nails. |
| TV feels unstable or loose on the mount. | Spring lock not fully engaged, or nails not fully seated. | Ensure the spring lock cord is pulled to secure the TV. Verify all nails are fully hammered into the wall plate. Ensure TV weight is within limits. |
| TV bracket does not fit the TV. | Incorrect VESA pattern or TV size. | Verify your TV's VESA pattern matches the mount's compatibility (100, 200, 300, 400, 600mm). Ensure your TV size is between 40-80 inches. |
| Cannot achieve desired tilt. | Incorrect spacers used or no spacers used. | Unmount the TV and ensure the correct spacers are attached to the lower VESA holes for either 0° or -5° tilt. |
If the problem persists, please contact Mount-It! customer support for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Mount-It! |
| Model Number | MI-376 |
| Item Weight | 5.54 pounds |
| Product Dimensions | 30.25 x 7.9 x 2 inches |
| Color | Grey |
| Material | Plastic |
| Mounting Type | Wall Mount (No Stud, Drywall) |
| Movement Type | Tilt |
| Maximum Compatible Size | 80 Inches |
| Minimum Compatible Size | 40 Inches |
| Maximum Weight Capacity | 110 lbs |
| Compatible Devices | Television |
| Maximum Tilt Angle | 5 Degrees (Adjustable to 0° or -5°) |
| VESA Compatibility | 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400 |
9. Warranty & Support
Specific warranty details for the Mount-It! No Stud TV Wall Mount (Model MI-376) are not provided in this manual. For warranty information, product support, or to inquire about replacement parts, please contact Mount-It! directly through their official website or customer service channels.
You can visit the official Mount-It! store on Amazon for more information: Mount-It! Amazon Store
