1. Introduction
This manual provides essential information for the safe and proper installation, operation, and maintenance of your Hudson Valley Lighting L1035-AGB Table Lamp. Please read all instructions carefully before proceeding with installation or use. Retain this manual for future reference.
2. Important Safety Information
- Electrical Safety: Always disconnect power at the main fuse or circuit breaker before installation or maintenance. Ensure all electrical connections comply with local codes and ordinances. If you are unsure about wiring, consult a qualified electrician.
- Product Use: This lamp is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Bulb Requirements: Use only incandescent bulbs with an E26 Medium base, A19 shape, and a maximum wattage of 100 watts. Exceeding the maximum wattage can cause overheating and damage to the lamp or create a fire hazard.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
- Certification: This product is UL Listed, indicating compliance with safety standards.
3. Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.
- Table Lamp Base (Crystal and Metal, Aged Brass finish)
- Linen Lamp Shade (Off-white)
- User Manual (this document)
4. Setup and Installation
Follow these steps to set up your table lamp:
- Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, flat, and stable surface.
- Attach Shade: Place the linen lamp shade onto the lamp base. Ensure it sits securely and evenly.
- Install Bulb: Screw an incandescent bulb (E26 Medium base, A19 shape, max 100 watts) into the lamp socket. Do not overtighten.
- Position Lamp: Place the assembled lamp on a stable, level surface in your desired location. Ensure the cord is not pinched or obstructed.
- Connect Power: Plug the lamp's power cord into a standard 120V AC electrical outlet.
Image 1: Assembled Hudson Valley Lighting L1035-AGB Table Lamp. This image displays the lamp's crystal base, aged brass accents, and the off-white linen shade, providing a visual reference for the fully set up product.
5. Operating Instructions
The Hudson Valley Lighting L1035-AGB Table Lamp features a pull chain switch for operation.
- To Turn On: Gently pull the chain extending from the lamp socket.
- To Turn Off: Gently pull the chain again.
Ensure the lamp is plugged into a live electrical outlet for proper function.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your lamp.
- Cleaning the Base: For the crystal and metal base, use a soft, dry, lint-free cloth to gently wipe away dust. For more stubborn marks, a slightly damp cloth with mild soap can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or chemicals that may damage the finish.
- Cleaning the Shade: The linen shade can be dusted with a soft brush or a vacuum cleaner with a brush attachment. Do not use wet cleaners on the fabric shade.
- Bulb Replacement: Before replacing a bulb, ensure the lamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and screw in a new E26 Medium base, A19 shape, max 100-watt incandescent bulb.
7. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
- Lamp Does Not Turn On:
- Ensure the power cord is securely plugged into a working electrical outlet.
- Check if the light bulb is securely screwed into the socket and is not burnt out. Replace if necessary.
- Verify that the circuit breaker or fuse for the outlet is not tripped or blown.
- Confirm the pull chain switch is functioning correctly by pulling it firmly.
- Flickering Light:
- Tighten the light bulb in the socket.
- Ensure the bulb wattage does not exceed the lamp's maximum rating.
- Try a different bulb to rule out a faulty bulb.
If problems persist after attempting these solutions, contact Hudson Valley Lighting customer support.
8. Specifications
| Model Name | L1035-AGB |
| Brand | Hudson Valley Lighting |
| Product Dimensions | 9.75"D x 8"W x 14"H |
| Item Weight | 18 Pounds |
| Material | Crystal, Metal |
| Finish | Aged Brass |
| Shade Material | Linen |
| Shade Color | Off-white |
| Bulb Base | E26 Medium |
| Bulb Shape Size | A19 |
| Light Source Type | Incandescent |
| Max Wattage | 100 watts |
| Voltage | 120 Volts |
| Switch Type | Pull Chain |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor |
| Certification | UL Listed |
9. Warranty and Support
Manufacturer's Warranty: This Hudson Valley Lighting L1035-AGB Table Lamp is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
Exclusions: The warranty does not cover damage caused by improper installation, misuse, accidents, alterations, or normal wear and tear. It also does not cover consumable parts such as light bulbs.
Customer Support: For warranty claims, technical assistance, or to inquire about replacement parts, please contact Hudson Valley Lighting customer service. Refer to the contact information provided with your purchase or visit the official Hudson Valley Lighting website for support details.
You can also visit the Hudson Valley Lighting Store on Amazon for more information.
