Trust Gaming GXT 629 Tytan 2.1 Speaker Set

Introduction

Thank you for choosing the Trust Gaming GXT 629 Tytan 2.1 Speaker Set. This powerful audio system is designed to enhance your gaming, music, and movie experiences with its 120W peak power, deep bass subwoofer, and customizable RGB LED lighting. This manual provides essential information for setting up, operating, and maintaining your speaker set to ensure optimal performance and longevity.

The Trust Gaming GXT 629 Tytan 2.1 Speaker Set, featuring the central subwoofer with RGB lighting and two satellite speakers, along with the wireless remote control.

Safety Information

Please read these safety instructions carefully before using the device. Keep this manual for future reference.

• Do not expose the device to rain, moisture, or extreme temperatures.
• Do not disassemble or modify the device. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the speakers and subwoofer to prevent overheating.
• Avoid placing the speakers near strong magnetic fields.
• Use only the power cable supplied with the device.
• Keep the device away from children and pets.
• Do not block any ventilation openings.

Package Contents

Verify that all items listed below are included in your package:

• 1x Subwoofer
• 2x Satellite Speakers
• 1x Wireless Remote Control (including batteries)
• 1x Power Cable
• 1x Audio Cable (3.5mm Aux)
• 1x User Manual (this document)
• 1x Gaming Sticker

Setup

Follow these steps to set up your Trust Gaming GXT 629 Tytan 2.1 Speaker Set:

1. Placement: Place the subwoofer on a flat, stable surface, preferably on the floor for optimal bass performance. Position the two satellite speakers on either side of your monitor or listening area, ensuring they are facing you.

   The two satellite speakers, designed for clear audio output.

2. Connect Satellite Speakers: Connect the cables from the satellite speakers to the corresponding output ports on the back of the subwoofer. Ensure a secure connection.

   Rear view of the subwoofer, showing the RCA input ports for satellite speakers and the power switch.

3. Connect Audio Source: Use the included 3.5mm audio cable to connect the subwoofer's audio input port to the audio output (headphone jack) of your PC, laptop, smartphone, or tablet.

   Connecting the 3.5mm audio cable to a laptop, demonstrating universal compatibility.
4. Power Connection: Connect the power cable to the subwoofer's power input and then plug it into a wall outlet.
5. Power On: Flip the power switch on the back of the subwoofer to the "ON" position. The RGB lighting on the subwoofer should illuminate.

Operating Instructions

Control your GXT 629 Tytan speaker set using the wireless remote control or the controls on the side of the subwoofer.

The wireless remote control for convenient adjustment of settings.

Remote Control Functions:

• Power Button (⏻): Turns the speaker set On/Off.
• Reset Button: Resets audio settings to default.
• Mute Button (🔇): Mutes/unmutes the audio.
• Volume Up (VOL+): Increases the master volume.
• Volume Down (VOL-): Decreases the master volume.
• Bass Up (SUB+): Increases the subwoofer bass level.
• Bass Down (SUB-): Decreases the subwoofer bass level.
• RGB Control (💡): Cycles through RGB lighting modes and colors.

  The subwoofer displaying its dynamic RGB lighting, which can be controlled via the remote.

Subwoofer Side Panel Controls:

• Standby Button: Puts the speaker set into standby mode.
• Source Button: Selects the audio input source (if multiple are available, though this model primarily uses 3.5mm Aux).
• Volume Up (VOL+): Increases the master volume.
• Volume Down (VOL-): Decreases the master volume.

Eco-Mode:

The GXT 629 Tytan features an intelligent Eco-Mode. If the speaker set is not used for 60 minutes, it will automatically enter standby mode to conserve energy. To reactivate, simply press any button on the remote control or the standby button on the subwoofer.

Maintenance

To ensure the longevity and optimal performance of your speaker set, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe down the surfaces of the speakers and subwoofer. Do not use liquid cleaners or abrasive materials, as they may damage the finish or internal components.
• Dust: Regularly remove dust from the speaker grilles and ventilation openings using a soft brush or a vacuum cleaner with a brush attachment.
• Storage: If storing the speaker set for an extended period, disconnect it from power and store it in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter any issues with your speaker set, refer to the table below for common problems and their solutions.

Specifications

Warranty and Support

Trust products come with a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official Trust Gaming website.

If you require technical support, have questions about your product, or need to claim warranty, please contact Trust customer support through their official website or the contact information provided in your product documentation.

You can find more information and support resources on the Trust Gaming Store on Amazon.