Product Overview
The Klipsch RP-502S Reference Premiere Surround Speakers are designed to deliver an immersive audio experience for your home theater system. These speakers feature advanced acoustic technologies to provide clear, detailed, and dynamic sound.
Key Features
- Dual 1-inch Titanium LTS Vented Tweeters with Hybrid Tractrix Horns
- Dual 5.25-inch Spun Copper Cerametallic Woofers
- Wide Dispersion Surround Technology
- Premium Scratch-Resistant Ebony Finish
- Magnetic Grilles
The RP-502S speakers are engineered to integrate seamlessly into various home audio setups, offering flexibility in placement and configuration.
Setup
Unpacking
Carefully remove the speakers from their packaging. Inspect for any signs of damage. Retain all packaging materials for future transport or storage.
Image: Front view of the Klipsch RP-502S Reference Premiere Surround Speakers in Ebony finish.
Placement
The RP-502S speakers are designed for optimal performance as surround sound speakers. They can be placed on stands, shelves, or wall-mounted. For best results, position them to the sides or slightly behind the main listening area, at or slightly above ear level when seated.
These speakers feature a wide dispersion surround technology, which helps create a broad, enveloping soundfield.
Image: Diagram showing the dimensions of the Klipsch RP-502S speaker.
Connections
Connect the speakers to your audio receiver or amplifier using high-quality speaker wire. Ensure correct polarity (+ to + and - to -) for each speaker. The RP-502S features robust binding posts for secure connections.
Image: Rear view of the Klipsch RP-502S speaker, highlighting the input terminals and keyhole for wall mounting.
Wall Mounting
The speakers are equipped with a keyhole mounting system for easy wall installation. Use appropriate wall anchors and screws suitable for the speaker's weight (approximately 36 pounds per speaker). Ensure the mounting surface can safely support the speakers.
For detailed instructions on wall mounting, consult a professional installer or refer to the specific mounting hardware instructions.
Operating
Initial Power-Up
After connecting all speakers to your receiver, power on your audio system. Start with the volume at a low level and gradually increase it to a comfortable listening volume.
Audio Configuration
Configure your audio receiver's settings to recognize the RP-502S as surround speakers. Many modern receivers offer automatic calibration systems (e.g., Audyssey, MCACC) that can optimize speaker levels, distances, and equalization for your room.
The RP-502S is designed to work effectively in Dolby Atmos setups. If your receiver supports Dolby Atmos, ensure the settings are configured to utilize the speakers' capabilities for overhead sound effects.
Dolby Atmos Functionality
The RP-502S speakers are designed to enhance Dolby Atmos experiences. When used in a Dolby Atmos configuration, these speakers contribute to the immersive, three-dimensional soundfield by reflecting sound off the ceiling.
Video: An overview of Dolby Atmos technology and its integration with Klipsch speakers, demonstrating how sound is directed and reflected to create an immersive audio experience.
Removable Grilles
The speakers feature magnetic grilles that can be easily removed or attached. You may choose to remove the grilles for a more exposed aesthetic, showcasing the spun copper Cerametallic woofers and Tractrix horns.
Image: Klipsch RP-502S speaker with the magnetic grille removed, revealing the drivers.
Maintenance
To maintain the appearance and performance of your Klipsch RP-502S speakers, follow these guidelines:
- Cleaning: Gently wipe the cabinet with a dry, soft cloth. Avoid using abrasive cleaners or solvents.
- Grilles: The magnetic grilles can be carefully removed for cleaning. Use a soft brush or vacuum cleaner with a brush attachment to remove dust.
- Driver Care: Avoid touching the speaker drivers (tweeters and woofers) directly, as this can cause damage.
- Placement: Keep speakers away from direct sunlight, heat sources, and excessive moisture.
Troubleshooting
If you encounter issues with your Klipsch RP-502S speakers, consider the following common troubleshooting steps:
- No Sound:
- Check all speaker wire connections at both the speaker and the receiver/amplifier. Ensure correct polarity.
- Verify the receiver/amplifier is powered on and set to the correct input source.
- Confirm the volume is not muted or set too low.
- Distorted Sound:
- Reduce the volume level on your receiver/amplifier.
- Check speaker wire connections for any loose strands or short circuits.
- Ensure the speakers are not overdriven by the amplifier.
- Uneven Sound:
- Check speaker balance settings on your receiver.
- Verify speaker placement and ensure they are equidistant from the listening position if possible.
If problems persist, consult your receiver/amplifier manual or contact Klipsch customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Klipsch |
| Model Name | Klipsch RP-502S Surround Sound Speakers (Pair) |
| Speaker Type | Surround |
| Connectivity Technology | Auxiliary (Wired) |
| Speaker Maximum Output Power | 100 Watts |
| Frequency Response | 25 KHz |
| Impedance | 8 Ohms |
| Woofer Diameter | 5.25 Inches |
| Product Dimensions | 16"D x 20"W x 18"H |
| Item Weight | 36 Pounds |
| Material | Metal (internal components), Wood (cabinet) |
| Color | Ebony |
| Included Components | A Speaker & Standard Accessories |
Warranty & Support
Manufacturer's Warranty
The Klipsch RP-502S speakers come with a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Klipsch website for detailed terms and conditions.
Customer Support
For technical assistance, product inquiries, or warranty claims, please contact Klipsch customer support through their official website or the contact information provided in your product documentation.
Online resources, including FAQs and additional support materials, may also be available on the Klipsch website.
