Fender Champion II 50 Guitar Amplifier Instruction Manual

Introduction

The Fender Champion II 50 Guitar Amplifier is a versatile and user-friendly amplifier designed for various guitar playing styles. Whether you are a beginner seeking your first practice amp or a seasoned player needing powerful stage gear, this 50-watt amplifier offers a wide range of tones and effects.

Key features include:

• 50 watts of power with a 12-inch Fender special design guitar speaker.
• World-renowned Fender clean and overdrive tones, plus British and modern distortion flavors.
• Multi-effects with two channels, including reverb, delay/echo, chorus, tremolo, and Vibratone.
• TAP button for easy synchronization of delay times and tremolo speeds.
• Auxiliary input for external devices, headphone output for private practice, and a rear-panel USB port.

Setup

Follow these steps to set up your Fender Champion II 50 amplifier:

1. Unpacking: Carefully remove the amplifier from its packaging. Retain all packaging materials for future transport or storage.
2. Placement: Place the amplifier on a stable, flat surface. Ensure adequate ventilation around the unit.
3. Power Connection: Connect the supplied power cable to the amplifier's power input and then to a suitable AC power outlet.
4. Instrument Connection: Plug your guitar into the INPUT jack on the front panel using a standard 1/4-inch instrument cable.
5. Power On: Turn the amplifier's power switch to the ON position. The PWR LED will illuminate.

Operating Instructions

Control Panel Overview

The Champion II 50 features an intuitive control panel for easy tone shaping:

• INPUT: 1/4-inch jack for connecting your instrument.
• FTSW (Footswitch): 1/4-inch jack for connecting an optional footswitch to toggle channels or effects.
• VOLUME 1: Controls the output level of Channel 1.
• CH SELECT: Toggles between Channel 1 (clean) and Channel 2 (voice/effects).
• GAIN: Controls the amount of overdrive/distortion in Channel 2.
• VOLUME 2: Controls the output level of Channel 2.
• VOICE: Selects different amplifier voicings (e.g., Classic Fender, British, Modern Distortion).
• TREBLE: Adjusts the high-frequency response.
• BASS: Adjusts the low-frequency response.
• MODIFY: Adjusts a secondary parameter for the selected effect.
• FX SELECT: Selects from 12 built-in effects (e.g., Reverb, Delay/Echo, Chorus, Tremolo, Vibratone).
• TAP: Used to set the tempo for time-based effects like delay and tremolo. Hold to activate dotted eighth note delay.
• AUX: 1/8-inch stereo input for connecting external audio devices (e.g., MP3 player).
• PHONES: 1/8-inch stereo output for headphones, automatically mutes the speaker.
• PWR: Power indicator LED.

Using Amp Models and Effects

The Champion II 50 offers a variety of amp models and effects to customize your sound:

• Amp Voicings: Use the VOICE knob to select different amp types, ranging from classic Fender clean tones to various overdrive and high-gain options.
• Built-in Effects: Turn the FX SELECT knob to choose from 12 different effects. The MODIFY knob allows for fine-tuning of the selected effect's parameters.
• Tempo Control: For effects like delay and tremolo, press the TAP button repeatedly to set the desired tempo. Holding the TAP button will activate a dotted eighth note delay function.

Connectivity

The amplifier provides convenient connectivity options:

• Auxiliary Input: Connect your music player to the AUX input to play along with your favorite tracks.
• Headphone Output: Use the PHONES jack for silent practice. The speaker output is automatically muted when headphones are connected.
• USB Port: A rear-panel USB port is available for recording directly to a computer.

Official Product Videos

Maintenance

Proper maintenance ensures the longevity and optimal performance of your amplifier:

• Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Avoid abrasive cleaners or solvents.
• Storage: When not in use, store the amplifier in a dry, temperature-controlled environment, away from direct sunlight or extreme temperatures.
• Ventilation: Ensure that the amplifier's vents are not obstructed to prevent overheating.
• Cable Care: Always handle power and instrument cables carefully. Avoid bending or crimping them excessively.

Troubleshooting

If you encounter issues with your amplifier, try these basic troubleshooting steps:

• No Power: Check if the power cable is securely connected to both the amplifier and the power outlet. Ensure the power switch is ON and the PWR LED is lit. Try a different power outlet.
• No Sound: Verify that your instrument cable is properly connected to both the guitar and the amplifier's INPUT jack. Check the VOLUME knobs for both channels and ensure they are not set to zero. If using headphones, ensure they are fully plugged into the PHONES jack.
• Distorted Sound (unintended): Check the GAIN and VOLUME settings. High GAIN settings are intended for distortion, but excessive levels can cause unwanted clipping. Ensure your instrument's volume is not too high.
• Effects Not Working: Ensure the FX SELECT knob is not set to OFF. Adjust the MODIFY knob to see if the effect parameter needs adjustment.

Specifications

Warranty & Support

Your Fender Champion II 50 Guitar Amplifier comes with a 2-Year Limited Warranty. Fender amplifiers are built with unmatched quality, and this warranty covers defects in materials and workmanship for two (2) years from the original purchase date.

For warranty claims, technical support, or service inquiries, please refer to the official Fender website or contact Fender customer service directly. Keep your proof of purchase for warranty validation.