Introduction
This manual provides instructions for the WINFLIKE Universal Remote Control, designed for use with various Hannspree TV models. This remote control requires no programming or pairing; simply install batteries to begin operation.
Compatible Hannspree TV Models:
- HSG1113
- HSG1139
- HSG1116
- HSG1076
- SJ28DMBB
- HSG1142
- HSG1117
- HSG1074
Image: Front view of the WINFLIKE Universal Remote Control, showing all buttons and its ergonomic design.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or press the latch and lift to open.
- Insert two (2) AAA 1.5V batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Replace the battery compartment cover, ensuring it clicks securely into place.
Note: This remote control does not require any programming or pairing. Once batteries are installed, it is ready for use with compatible Hannspree TV models.
Image: Rear view of the remote control with the battery compartment open, showing where to insert two AAA batteries.
Operating Instructions
Familiarize yourself with the buttons on your remote control for optimal use.
Button Functions Overview
Image: Close-up of the top section of the remote, highlighting the power button, input selection, and number pad.
- Power Button (Yellow): Turns the TV on or off.
- Input: Selects the video input source (e.g., HDMI 1, AV).
- Number Pad (0-9): Directly enters channel numbers.
- Pro.LIST: Accesses the program list.
- INFO: Displays information about the current program.
- LAST: Returns to the previously viewed channel.
Image: Close-up of the middle section of the remote, showing navigation arrows, OK button, menu, volume, and channel controls.
- MENU: Opens the TV's main menu.
- Navigation Arrows (Up, Down, Left, Right): Navigates through menus and options.
- OK: Confirms selections in menus.
- EPG: Accesses the Electronic Program Guide.
- TEXT: Activates or deactivates Teletext.
- VOL (+/-): Adjusts the volume level.
- MUTE: Mutes or unmutes the TV sound.
- CH (P Up/Down): Changes channels.
Image: Close-up of the bottom section of the remote, featuring colored buttons (Red, Green, Yellow, Blue) and various special function buttons like FAV, FREEZE, SLEEP, and ASPECT.
- Colored Buttons (Red, Green, Yellow, Blue): Functions vary depending on the TV menu or interactive content.
- INDEX: Accesses index functions.
- MIX: Mixes video and teletext.
- SIZE: Adjusts teletext display size.
- SUBTITLE: Toggles subtitles on/off.
- HOLD: Holds the current teletext page.
- REVEAL: Reveals hidden teletext information.
- SOUND: Accesses sound settings.
- PIC: Accesses picture settings.
- FAV: Accesses favorite channels.
- FREEZE: Freezes the current image.
- SLEEP: Sets the sleep timer.
- ASPECT: Changes the screen aspect ratio.
Maintenance
Battery Replacement
Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries simultaneously with new AAA 1.5V batteries. Do not mix old and new batteries, or different types of batteries.
Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or solvents, as these can damage the remote's surface or internal components.
Storage
When not in use for extended periods, remove the batteries to prevent leakage, which can damage the remote control. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly, observing the polarity (+/-).
- Replace old batteries with new AAA 1.5V batteries.
- Ensure there are no obstructions between the remote control and the TV's infrared sensor.
- Confirm the remote is pointed directly at the TV.
- Some buttons not working:
- Clean the remote control, especially around the unresponsive buttons, to remove any dirt or debris.
- If the issue persists after replacing batteries, the remote control may be faulty.
- TV not responding to any commands:
- Verify that the TV is powered on and not in standby mode.
- Ensure the remote control is compatible with your specific Hannspree TV model (refer to the "Introduction" section for compatible models).
Specifications
| Model Number | WL-HANNSPREE |
| Product Dimensions | 7 x 2 x 0.65 inches |
| Item Weight | 2 ounces |
| Batteries Required | 2 AAA batteries (not included) |
| Color | Black |
| Special Feature | Universal (for specified Hannspree models) |
| Compatible Devices | Television |
Warranty Information
Specific warranty details for this product are not provided in the available information. Please refer to the product packaging or contact the manufacturer, WINFLIKE, directly for warranty terms and conditions.
Support Information
For further assistance or inquiries regarding your WINFLIKE Universal Remote Control, please contact WINFLIKE customer support. Contact information may be available on the product packaging or the manufacturer's official website.
If you have any problem with the remote control, Please feel free to contact us, we promise to help you to solve it.
