1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your GAMI Ethan 1G75594 Combined Bed. This product is designed to offer a space-saving solution with integrated sleeping, working, and storage areas. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image 1.1: Overview of the GAMI Ethan 1G75594 Combined Bed installed in a room.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in serious injury or property damage.
- Do not exceed the maximum weight capacity of 156.5 kg (345 lbs) for the bed.
- Assemble the product with caution to prevent injuries. It is recommended that two adults assemble this furniture.
- Keep all small parts and packaging materials out of reach of children to avoid choking hazards.
- Ensure all screws, bolts, and fasteners are securely tightened before use and periodically check for tightness.
- Do not allow children to play unsupervised on or around the bed, especially on the ladder.
- The bed is designed for a mattress of 90x200 cm. Ensure the mattress thickness does not exceed the safety rail height.
- Place the bed on a level and stable surface.
3. Components List
Before assembly, verify that all components listed below are present and undamaged. Refer to the assembly diagram for part identification.
- Bed frame components
- Ladder
- Wardrobe door with hanging rail
- 2 drawers
- Desk with shelf
- Niche storage unit
- Shelf on chest of drawers
- Assembly hardware (screws, dowels, cam locks, etc.)
Image 3.1: Integrated wardrobe and drawers of the combined bed.
4. Setup and Assembly
Assembly typically requires two adults and can take approximately half a day. Follow the numbered instructions provided in the separate assembly diagram included with your product. Ensure you have the necessary tools (e.g., screwdriver, hammer) before starting.
- Unpack and Organize: Carefully unpack all boxes and lay out the components. Verify all parts against the components list and assembly diagram. Keep all hardware organized.
- Assemble Base Units: Begin by assembling the main structural units, such as the wardrobe, desk, and drawer modules, according to the diagram.
- Attach Bed Frame: Securely attach the bed frame to the assembled base units. Ensure all connections are tight and stable.
- Install Ladder: Mount the ladder securely to the designated points on the bed frame. Test its stability before use.
- Install Drawers and Door: Assemble and install the drawers into their runners. Attach the wardrobe door and adjust hinges for proper alignment.
- Final Checks: Once assembled, double-check all fasteners for tightness. Ensure the bed is stable and does not wobble.
Image 4.1: Dimensions of the GAMI Ethan 1G75594 Combined Bed.
5. Operating Instructions (Usage)
The GAMI Ethan Combined Bed offers multiple functionalities:
- Sleeping Area: The elevated bed is designed for a 90x200 cm mattress. Always use the ladder to access the bed.
- Desk Area: Utilize the integrated desk for studying or other activities. The shelf above the desk provides additional storage.
- Wardrobe: The wardrobe includes a hanging rail for clothes.
- Drawers: Two pull-out drawers provide convenient storage for various items.
- Niche and Shelves: Use the open niche and additional shelves for books, decorations, or other personal belongings.
Image 5.1: Detail of the integrated storage drawers.
6. Maintenance
Proper maintenance will extend the life of your GAMI Ethan Combined Bed:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Hardware Check: Periodically (e.g., every 3-6 months) check all screws, bolts, and fasteners to ensure they remain tight. Re-tighten if necessary.
- Avoid Moisture: Protect the furniture from excessive moisture and direct sunlight to prevent warping or fading.
- Weight Distribution: Distribute weight evenly in drawers and on shelves to prevent strain on the structure.
7. Troubleshooting
If you encounter any issues with your combined bed, consider the following:
- Wobbling/Instability: Ensure the bed is on a level surface. Check all assembly hardware and tighten any loose connections.
- Drawers Sticking: Verify that the drawer runners are clean and free of obstructions. Ensure the drawers were assembled correctly and are aligned.
- Door Misalignment: Adjust the hinges on the wardrobe door to correct any misalignment.
- Missing Parts: If any parts were missing upon delivery, contact customer support immediately.
8. Specifications
| Feature | Detail |
|---|---|
| Model | Ethan 1G75594 |
| Brand | GAMI |
| Dimensions (L x W x H) | 208 cm x 107 cm x 193 cm (81.9 in x 42.1 in x 76 in) |
| Material | Engineered Wood (Particleboard) with Oak imitation finish |
| Color | Light Oak |
| Finish Type | Lacquered (Hydro UV solvent-free lacquers) |
| Mattress Size Compatibility | 90x200 cm (Queen size compatible in some regions, but 90x200 is the specific dimension) |
| Maximum Recommended Load | 156.5 kg (345 lbs) |
| Weight | 161 kg (355 lbs) |
| Included Components | Bed, 2 drawers, Desk with shelf, Niche, Wardrobe with hanging rail, Assembly materials |
| Special Feature | Space-saving design |
| Origin | Made in France |
9. Warranty
The GAMI Ethan 1G75594 Combined Bed comes with a 24-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for any warranty claims. The warranty does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear.
10. Support
For assembly assistance, missing parts, or any other inquiries regarding your GAMI Ethan Combined Bed, please contact GAMI customer support. Refer to the contact information provided with your purchase documentation or visit the official GAMI website for support details.