Lampa 58329 D8S Xenon Lamp User Manual

1. Introduction

Thank you for choosing the Lampa 58329 D8S Xenon Lamp. This product is an OEM quality replacement bulb designed for vehicles equipped with factory-installed D8S xenon headlights. It provides a 4300 Kelvin light temperature, offering a bright and clear illumination for road use. This manual will guide you through the proper installation, operation, and maintenance to ensure optimal performance and longevity of your new lamp.

Product Identification: EAN: 8000692583296

2. Safety Information

WARNING: Xenon lamps operate at extremely high voltages (up to 25,000 volts) and temperatures. Improper handling can result in severe electrical shock, burns, or lamp damage. It is highly recommended that installation be performed by a qualified automotive technician.

• Always disconnect the vehicle's battery before attempting any electrical work.
• Allow the lamp to cool completely before handling if it has been in operation.
• Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots and significantly reduce the lamp's lifespan. Use clean gloves or a lint-free cloth.
• Ensure the lamp is correctly seated and secured in its housing before reconnecting power.
• Dispose of old lamps responsibly according to local regulations.

3. Product Overview

The Lampa 58329 is a D8S type Xenon discharge lamp, designed as a direct replacement for original equipment. It features an integrated igniter and ballast, simplifying the replacement process. The lamp provides a luminous flux of 3200 lumens at a color temperature of 4300 Kelvin, ensuring excellent visibility and a natural white light output.

Figure 1: Front view of the Lampa D8S Xenon lamp, showing the glass bulb and the integrated ballast/base.

Figure 2: Side view technical drawing of the Lampa D8S Xenon lamp with dimensions, indicating a total height of 83mm.

Figure 3: Top-down technical drawing of the Lampa D8S Xenon lamp, showing the base and bulb structure from above.

Figure 4: Retail packaging of the Lampa D8S Xenon lamp, displaying product information, specifications like 25W and 4300K, and various language descriptions.

4. Setup (Installation)

The installation of a D8S Xenon lamp requires careful attention to safety and proper procedure. If you are not confident in your ability to perform this task safely, please seek professional assistance.

1. Preparation: Park the vehicle on a level surface and engage the parking brake. Turn off the engine and all lights. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical discharge.
2. Access the Headlight Assembly: Depending on your vehicle model, you may need to remove certain components (e.g., fender liner, air intake, battery) to gain access to the rear of the headlight assembly. Consult your vehicle's service manual for specific instructions.
3. Remove the Old Lamp: Locate the D8S lamp at the back of the headlight housing. Carefully twist or unclip the retaining mechanism that holds the lamp in place. Disconnect the electrical connector by pressing the release tab and pulling it away from the lamp. Gently pull the old lamp straight out of the housing.
4. Install the New Lamp: Wearing clean gloves, carefully remove the new Lampa D8S Xenon lamp from its packaging. Avoid touching the glass bulb. Align the base of the new lamp with the socket in the headlight housing. Push it firmly and straight into place until it is fully seated.
5. Secure and Connect: Re-engage the retaining mechanism (twist or clip) to secure the lamp. Reconnect the electrical connector, ensuring it clicks firmly into place.
6. Reassemble: Reinstall any components that were removed to access the headlight assembly.
7. Test: Reconnect the vehicle's battery. Turn on the headlights to verify that the new lamp is functioning correctly. Observe the light pattern and color.

5. Operating Instructions

Once installed, the Lampa 58329 D8S Xenon lamp operates automatically with your vehicle's headlight system. When the headlights are activated, the integrated igniter and ballast within the lamp's base will initiate the high-voltage discharge required to illuminate the xenon gas, producing a bright, stable light output.

• Allow a few seconds for the lamp to reach full brightness after activation.
• Avoid frequently turning the headlights on and off, as this can reduce the lifespan of xenon lamps.

6. Maintenance

Xenon lamps are generally low-maintenance components. However, proper care can extend their lifespan and ensure consistent performance.

• Cleaning: If the glass bulb becomes dirty, gently wipe it with a clean, lint-free cloth moistened with isopropyl alcohol. Ensure the lamp is cool and disconnected from power before cleaning.
• Inspection: Periodically check your headlights for proper operation. If one lamp appears dimmer or has a different color than the other, it may be nearing the end of its life.
• Replacement: Xenon lamps typically have a long lifespan, but they will eventually dim or fail. It is often recommended to replace both lamps at the same time to maintain consistent light output and color, as older lamps may have a slightly different color temperature than new ones.

7. Troubleshooting

If you experience issues with your Lampa D8S Xenon lamp, consider the following troubleshooting steps:

• Lamp Not Lighting:
  • Check the electrical connection to ensure it is secure and fully seated.
  • Verify that the vehicle's fuses related to the headlight system are intact.
  • If only one lamp is out, the lamp itself may be faulty. Try swapping it with the working lamp (if safe to do so and if both are the same type) to confirm.
  • If both lamps are out, there might be an issue with the vehicle's wiring or headlight control module.
• Flickering or Intermittent Operation:
  • This can indicate a loose connection. Re-seat the lamp and its electrical connector.
  • Flickering can also be a sign that the lamp is nearing the end of its operational life.
• Incorrect Color Output:
  • If the lamp produces a significantly different color (e.g., pinkish or purplish hue), it is likely failing and requires replacement.

For persistent issues, it is recommended to consult a professional automotive electrician or mechanic.

8. Specifications

9. Warranty and Support

Lampa products are manufactured to high-quality standards. For specific warranty information, please refer to the packaging or contact your point of purchase. For technical support or inquiries, please visit the official Lampa website or contact their customer service department.