1. Introduction
This manual provides essential instructions for the assembly, operation, and maintenance of your ARCADE1UP Riser. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
2. Safety Information
- Always assemble the riser on a flat, stable surface.
- Ensure all screws are securely tightened before placing an arcade machine on the riser.
- Do not use power tools for assembly unless explicitly instructed, as over-tightening can damage components. A screwdriver is generally sufficient.
- Keep small parts and hardware away from children to prevent choking hazards.
- The riser is designed to support ARCADE1UP arcade machines. Do not exceed the recommended weight capacity or use with incompatible products.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact ARCADE1UP customer support.
- Riser Panels (various shapes and sizes)
- Wooden Dowels
- Screws (various types, typically self-tapping)
- Corner Brackets (if applicable to your model)
- Instruction Manual
Note: A Phillips head screwdriver is required for assembly and is not included.
4. Assembly Instructions
Follow these steps carefully to assemble your ARCADE1UP Riser. Refer to the included diagram for visual guidance.
4.1. Unboxing and Preparation
Carefully remove all components from the packaging. Lay out all panels and hardware on a clean, soft surface to prevent scratches. Identify each part by its label (e.g., rN, rP, rO, rM for panels; rA, rB, rC for screws/dowels as per the video example).
Image: ARCADE1UP Riser components, including panels and hardware, ready for assembly.
4.2. Step-by-Step Assembly
- Assemble the Base Structure: Connect the base panels using the provided wooden dowels and screws. Ensure the panels are aligned correctly before tightening.
- Attach Side Panels: Secure the side panels to the base structure. The side panels typically feature the ARCADE1UP logo.
- Insert Support Braces: Place the internal support braces between the side panels to provide structural integrity.
- Final Tightening: Double-check all screws to ensure they are snug, but do not overtighten.
4.3. Visual Assembly Guide
For a detailed visual walkthrough of the assembly process, please refer to the official ARCADE1UP Assembly Instructions video below.
Video: Official ARCADE1UP Assembly Instructions. This video demonstrates the step-by-step process of assembling an ARCADE1UP arcade machine, including the base structure which is similar to the riser assembly.
Image: An assembled ARCADE1UP Riser providing additional height to an ARCADE1UP arcade machine, allowing for comfortable standing play.
5. Operating Instructions
The ARCADE1UP Riser is designed to elevate your ARCADE1UP arcade machine by 1 foot, enabling comfortable standing gameplay.
- Placement: Once the riser is fully assembled and stable, carefully lift your ARCADE1UP arcade machine and place it securely on top of the riser. Ensure the arcade machine is centered and stable on the riser.
- Stability Check: Gently push on the arcade machine from different angles to confirm it is stable and does not wobble. If instability is detected, re-check all connections and ensure the riser is on a level surface.
- Enjoy: Your ARCADE1UP arcade machine is now at an optimal height for standing play.
6. Maintenance
- Cleaning: Wipe the riser with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Storage: If disassembling for storage, keep all hardware in a sealed bag to prevent loss.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Riser is wobbly or unstable. | Loose screws; uneven assembly; uneven floor surface. | Ensure all screws are tightened. Disassemble and reassemble carefully. Place the riser on a level surface. |
| Parts do not fit together. | Incorrect orientation of panels; incorrect parts used. | Refer to the assembly diagrams and video to ensure correct part orientation and usage. Do not force parts together. |
8. Specifications
- Model: 6998
- Dimensions: 19.29 x 23.23 x 12.01 inches (L x W x H)
- Material: Wood
- Weight: 14 pounds
- Height Increase: 1 foot (approximately 30.5 cm)
- Manufacturer: Arcade1Up
- Recommended Age: 14 years and up
9. Warranty and Support
For warranty information, product support, or to order replacement parts, please visit the official ARCADE1UP website or contact their customer service department. Keep your proof of purchase for warranty claims.
ARCADE1UP Customer Service: www.arcade1up.com/support
