1. Introduction
Thank you for choosing the Eightwood Active DAB/DAB+ AM/FM GPS Car Antenna. This manual provides essential information for the correct installation, operation, and maintenance of your antenna. Please read it thoroughly before installation and keep it for future reference to ensure optimal performance and longevity of the product.
2. Product Overview
The Eightwood EWAN4609GE is a multi-functional active car antenna designed to enhance signal reception for Digital Audio Broadcasting (DAB/DAB+), Amplitude Modulation/Frequency Modulation (AM/FM) radio, and Global Positioning System (GPS). It features an integrated amplifier for improved signal strength and comes with all necessary cables and connectors for a comprehensive car audio and navigation setup.
Package Contents:
- 1 x Eightwood Active DAB/DAB+ AM/FM GPS Car Antenna
- 1 x 12V Power Cable
- 1 x Fixing Nut
A complete view of the Eightwood active car antenna, showcasing its compact design and the integrated cables for DAB, AM/FM, and GPS functionalities.
3. Setup and Installation
Proper installation is crucial for optimal performance. It is recommended to have this antenna installed by a qualified professional.
Mounting Location:
- The antenna is designed for roof mounting.
- A drilling hole with a diameter of 10.5 mm is required for installation.
- Ensure the mounting surface is clean, dry, and free from obstructions.
The underside of the antenna, displaying the central mounting nut and the exit points for the various signal and power cables, ready for roof installation.
Electrical Connections:
The antenna requires a 12V power supply for its active amplifier. Connect the red wire to a switched 12V accessory power source (ACC) in your vehicle. Ensure all connections are secure and properly insulated to prevent short circuits.
This image illustrates the various connectors of the Eightwood multi-function antenna, including the 12V power supply, DAB (SMB), GPS (SMA), and FM/AM (DIN) connections.
Signal Connections:
- AM/FM: Connect the DIN adapter plug to your car radio's AM/FM antenna input.
- DAB/DAB+: Connect the SMB plug to your DAB/DAB+ compatible car radio or adapter.
- GPS: Connect the SMA adapter plug to your GPS navigation unit's antenna input.
Route all cables carefully to avoid pinching, abrasion, or interference with vehicle components. Use a grommet or protective sleeve where cables pass through metal panels to prevent wear and potential short circuits.
4. Operating Instructions
Once installed, the Eightwood antenna operates passively for signal reception, with its internal amplifier boosting the signals for improved clarity and range. Ensure your car radio and GPS unit are properly configured to receive signals from the external antenna.
- DAB/DAB+ Reception: Tune your DAB/DAB+ compatible radio to scan for available digital radio stations. The active amplification will help in areas with weaker digital signals.
- AM/FM Reception: Select AM or FM mode on your car radio. The antenna provides enhanced reception for analog radio broadcasts.
- GPS Functionality: Ensure your GPS navigation system is connected and powered on. The antenna provides a stable and accurate GPS signal for navigation.
5. Maintenance
The Eightwood antenna is designed for durability and requires minimal maintenance.
- Cleaning: Periodically clean the exterior of the antenna with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
- Inspection: Regularly check the antenna's mounting and cable connections for any signs of looseness, corrosion, or damage. Ensure the cables are not exposed to excessive heat or sharp edges.
- Environmental Factors: While designed for outdoor use, extreme weather conditions (e.g., heavy ice, strong impacts) can potentially affect performance or cause damage.
6. Troubleshooting
If you experience issues with your antenna, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor or no DAB/DAB+ reception |
|
|
| Poor or no AM/FM reception |
|
|
| Inaccurate or no GPS signal |
|
|
| Antenna appears loose | Mounting nut is loose. | Tighten the fixing nut from the underside of the roof. |
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | EWAN4609GE |
| AM/FM Frequency Range | 522-1710 kHz (AM), 87.5-108 MHz (FM) |
| AM/FM Gain | 13±3 dB (AM), 16±3 dB (FM) |
| AM/FM Connector | DIN Adapter |
| DAB Frequency Range | 170MHz-240MHz (Band III), 1452MHz~1492MHz (L-Band) |
| DAB Gain | 18dB±3dB (Band III), 8dB ±3dB (L-Band) |
| DAB Connector | SMB Plug |
| GPS Frequency Range | 1575.42±1.023 MHz |
| GPS Gain | 28 dB ± 3 dB |
| GPS Connector | SMA Adapter |
| Cable Type | RG174 |
| Cable Length | 5 meters |
| Impedance | 50 Ohms |
| Dimensions (L x W x H) | 13.8 cm x 6.5 cm x 6.3 cm |
| Mounting Hole Diameter | 10.5 mm |
| Power Supply | 12V DC (via ACC cable) |
8. Warranty and Support
Eightwood products are manufactured to high-quality standards. For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
For technical assistance or inquiries, please visit the official Eightwood website or contact their customer service department.
